v-fitness VF-M3 Momentum 3.0 Smart Watch Instruction Manual
- June 13, 2024
- v-fitness
Table of Contents
v-fitness VF-M3 Momentum 3.0 Smart Watch
Product Information
Specifications:
- Screen size: 1.8 inches
- Watch Dimensions (L x W x H): 260.95 x 37.22 x 11.34 mm
- Body Dimensions (L x W x H): 45.22 x 37.22 x 11.34 mm
- Charging Method: Magnetic contact charging
- Screen Resolution: 240*284
- Watch weight: 40g
- Strap Sizes: 93mm and 112mm
- Microphone: Supported
- Bluetooth: Version 5.3
- Pairing Name: VF-M3A
- APP: VeryFit
- Battery capacity: 3.8V 300mAh Lithium battery
- Battery life: Up to 5 days
- Bluetooth battery life: Up to 4 days
- Charging time: Within 2.5 hours
- Waterproof level: IP68
Features:
- Track daily activities such as sports, heart rate, and sleep.
- 1.8-inch touch screen.
- Receive messages and notifications from your phone.
- Up to 5-day battery runtime.
General Care and Maintenance:
- Keep the product dry and clean when possible. Soap-free cleaner is recommended.
- This product is not suitable for use while diving, swimming in the sea, or in a sauna.
- Avoid exposing the product to extreme temperatures, as it may cause product failure.
- Do not disassemble or modify the product and its accessories by yourself.
Product Overview:
- Physical Button
- Microphone
- Magnetic Charging Contacts
- Heart Rate Sensor
- Speaker
Product Usage Instructions
Charging:
Note: Charge the watch to activate it before first use.
- Connect the magnetic charging cable to the watch as pictured.
- Connect the other end of the cable to a USB wall adapter or USB power source with 5V/1A (5W) output.
- Please charge the battery to 100% before first use.
Replacing the Strap:
Quick Release
- Move the quick release switch on the back of the watch band to unlock.
- Replace with another strap, making sure it clicks in place.
Controls:
-
Physical Button Operation:
- Short press: To return. To wake the screen when it is off.
- Long press: To turn on the watch. Under the power-on state, long press for 8 seconds to restart.
- Turning on/off: To turn on the watch, long press the button. To turn the watch off, go to settings -> turning off menu. To restart, long press for 8 seconds while the watch is on.
Note: While the watch is off, it automatically turns on when you put it on charge.
-
Menu controls: Swipe the screen to navigate and tap function icon to enter corresponding sub-menu.
-
Wake-Up Screen: Tap the power button or raise wrist (setting must be enabled in the app).
-
Settings Function Menu: Swipe down from the Wake gesture On clock interface for Battery, Watch setting…
-
Other Function: In the clock interface, swipe up from clock interface for message. No notifications.
-
Swipe left: For Activity, heart rate, sports function.
Note: This product is for general purpose only, not for detection of any medical condition.
WHAT’S IN THE BOX
- Momentum 3.0 Smart Watch
- Magnetic Charging Cable
- Spare Watch Band
- User Manual
Note: A USB wall adapter (not included) is required to charge the watch.
SPECIFICATIONS
Screen size | 1.8″ |
---|---|
Watch Dimensions (L x W x H)mm | 260.95 x 37.22 x 11.34 |
Body Dimensions (L x W x H)mm | 45.22 x 37.22 x 11.34 |
Charging Method | Magnetic contact charging |
Screen Resolution | 240*284 |
Watch weight | 40g |
Strap Sizes: | 93mm and 112mm |
Microphone | support |
Bluetooth | 5.3 |
Pairing Name | VF-M3A |
APP | VeryFit |
Battery capacity | 3.8V 300mAh Lithium battery |
Battery life | Up to 5 days |
BT battery life | Up to 4 days |
Charging time | Within 2.5 hours |
Waterproof level | IP68 |
FEATURES
- Track daily activities such as sports, heart rate and sleep.
- 1.8 inch touch screen.
- Get messages and notification from your phone.
- Up to 5-day runtime.
Note: For operating instructions and FAQ on these features, please turn on the app and go to “How to Use” section.
FOR GENERAL CARE AND MAINTENANCE
- Keep product dry and clean when possible, soap free cleaner recommended.
- This product is not suitable for use while diving, swimming in the sea or in sauna.
- Keep away from extreme temperatures, might case product failure.
- Do not disassemble or modify the product and its accessories by yourself.
PRODUCT OVERVIEW
CHARGING
Note: Charge the watch to activate it before first use.
- Connect the charging cable to watch as pictured.
- Connect the other end of the cable to USB wall adapter or USB Power source with 5V/1 A (5W) output.
- Please charge the battery to 100% before 1st use.
REPLACING THE STRAP
- Move the quick release switch on the back of the watch band to unlock.
- Replace with another strap making sure it clinks in place.
CONTROLS
Physical Button Operation
- Short press
- To return.
- To wake the screen when it is off.
- Long press
- To turn on the watch.
- Under the power on state, long press for 8 seconds to restart.
- Turning on/off
- To turn on the watch, long press the button.
- To turn the watch off, go to settings -> turning off menu.
- To restart, long press for 8 seconds while watch is on.
Note: While the watch is off, it automatically turns on when you put it on charge.
-
Menu controls:
Swipe the screen to navigate and tap function icon to enter corresponding sub- menu. -
Wake-Up Screen:
Tap the power button or raise wrist (setting must be enabled in the app). -
Settings Function Menu:
Swipe down from the clock interface for Battery, Watch setting….. -
Other Function:
In the clock interface, swipe up from clock interface for message. -
Swipe left for Activity, heart rate, sports function.
Note: This product is for general purpose only, not for detection of any medical condition.
- Press button to go to all function menu.
SOFTWARE
****Download the “Veryfit” app form App Store, google play or use the QR code provided.
- Pairing the watch to veryfit App
- Turn on “Veryfit” app.
- Activate Bluetooth connection on your phone.
- Search for device name VF-M3A
- Once find, tap VF-M3A to finish pairing.
- To unpair device
- Use the Bluetooth or go to Device in the app setting.
- Tap VF-M3A icon to enter Device management.
- Tap Delete device and follow the prompt.
For the best performance of all “Veryfit” App function, please allow the App access to all permissions on your smartphone when prompted. This includes access to GPS, Notifications and Bluetooth. Note: For more information, use the “How to use” in the App main interface under Device.
MAIN FUNCTION
- Activity Display steps, and daily active mins.
- Choose between different work out modes.
- Alarm clock, stopwatch and timer function.
- Check information on any work out activity recorded.
Thank you for your purchase!
-
Laser Corporation is 100% Australian owned & operated. To get the most out of your product please read the user manual carefully and keep for future use.
-
For specific information relating to your product such as Spare Parts, FAQs, Warranty claims, and more, please scan the following QR code:
-
Visit our website
www.laserco.com.au -
Check us out at
www.youtube.com/lasercoau
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>