ZAZU 13222T Wally Whale Light Projector User Manual
- June 7, 2024
- ZAZU
Table of Contents
ZAZU 13222T Wally Whale Light Projector
LIGHT PROJECTOR
- Place 3x AA batteries (not included).
- Only use alkaline batteries, no zinc carbon.
USING INSTRUCTION
-
A: With BUTTON A you will switch on Wally.
- Press 1x blue light
- Press 2x green light
- Press 3x red light
- Press 4x multi-colour light
- Press 5x no light
- Wally will automatically switch OFF after 30 minutes.
-
A: Switch OFF completely by keeping BUTTON A pressed for 2 seconds.
-
B: Choose your favourite melodie with SLIDER B.
OFF: No music- Lounge music
- Ocean sound
- Heartbeat
-
C: Switch the cry sensor ON/OFF with SLIDER C: the cry sensor reactivates Wally when your child is crying and will stay active for 12 hours.
Not e Please note that the cry sensor will become active after the music has stopped playing the 1st time.
The sensitivity of the sensor will be influenced by distance and by objects in between the sensor and the baby. -
D: Choose your volume setting with SLIDER D: high-low.
Can be attached to the crib with the velcro strap (included).
- For the best projection, locate the product within 1 to 2.5 meters from the walls and ceiling.
- When batteries lose their power, the projection decreases, and the product might lose some of the features.
SAFETY
WARNING! SAFETY GUIDELINES
- IMPORTANT! Keep it for future reference.
- This ZAZU product is fully compliant with the EU, CA, AU, NZ, RU, CN & USA legislation.
- Please keep the packaging away from small children.
- Please ensure that the product is kept out of reach of small children and never allow your child to play with the batteries.
- This product works with 3x AA 1.5 V batteries (not included).
- Only use the specified batteries. Remove empty batteries from the product. Batteries should only be placed by adults. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-Zn), or rechargeable (Ni MH) batteries.
- Non-rechargeable batteries cannot be charged.
- Batteries should be placed in the correct polarity.
- Do not short-circuit the power terminal.
- Only use alkaline batteries, no zinc carbon.
- When not in use please switch the product OFF completely
- When not in use turn the product to the OFF mode.
- This light does not get warm.
- This product is intended for indoor use and is not water resistant. Please keep it dry.
- For cleaning do not immerse in water, but wipe with a damp cloth.
- Do not try to disassemble the product if it stops working.
Please contact customer service
Manufactured and distributed by ZAZU PO Box 299 | 3740 AG Baarn
The Netherlands | info@zazu-kids.nl
V10-MANUAL-WALLY-2024-04
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>