ZAZU 0703625107849 Star Projector with Soothing Melodies User Manual

ZAZU 0703625107849 Star Projector with Soothing Melodies

Take the module out of the plush and place 3x AA batteries (not included). Put the module back into the plush. Open the Velcro, on the bottom, to operate the buttons.

1. Set the ON/OFF SWITCH A into the ON position. Put the projection module back.
2. Star Projection: Press BUTTON B to start the projection. Press more times to switch between colours. The projector will switch off automatically after 30 min.
3. Melodies: Press BUTTON C to start playing the music. Press several times to switch between melodies. The sound will switch off after 15 min.
4. Volume: Press BUTTON D 1 or 2 times (loud-soft).
5. Cry sensor ON/OFF
6. To switch ON/OFF press BUTTON E for 3 sec.
7. ON A green light will flicker for a few sec. If your baby starts crying, the last played song will automatically switch back on. Cry sensor will stay active for 12 hours.
8. OFF An orange light will flicker for a few sec.

Note The sensitivity of the sensor will be influenced by distance and by objects in between sensor and baby

WARNING! SAFETY GUIDELINES

• IMPORTANT! keep for future reference.
• This ZAZU product is fully compliant with the EU, CA, AU, NZ, USA and CN legislation.
• Please keep the packaging away from small children.
• Never allow your child to play with the batteries.
• This product works with 3x AA 1.5 V batteries (not included).
• Only use the specified batteries.
• Remove empty batteries from the product.
• Batteries should only be placed by adults.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-Zn), or rechargeable Ni MH) batteries.
• Only use alkaline batteries, no zinc carbon.
• Non-rechargeable batteries cannot be charged.
• Batteries should be placed in the correct polarity.
• Do not short-circuit the power terminal.
• When not in use please switch the product OFF completely.
• Do not place inside the cot or too close to the baby.
• The plush can be washed by hand and air dried, but remove the module beforehand.
• This light does not get warm.
• This product is intended for indoor use and is not water resistant. Please keep dry. For cleaning do not immerse in water, but wipe with a damp cloth.
• Do not try to disassemble the product if it stops working. Please contact customer service.

Manufactured and distributed by ZAZU PO Box 299 | 3740 AG Baarn The Netherlands | info@zazu-kids.nl

References

• KidsKonnect

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>