marta MT-HP4226A Electric Stove User Manual
- June 7, 2024
- MARTA
Table of Contents
marta MT-HP4226A Electric Stove
Specifications
- Power: 1800 Watts
- Voltage: 220 Volts
- Temperature Range: Up to 300°C
- Number of Plates: 2
- Control Panel: Included
Installation
- Place the electric stove on a flat, stable surface.
- Ensure proper ventilation around the stove.
- Connect the stove to a suitable power source.
Operation
- Turn the rotate switch to the desired heat setting.
- Place cookware on the plates.
- Adjust the temperature using the control panel.
Safety Precautions
- Avoid touching hot surfaces during and after use.
- Unplug the stove when not in use.
- Do not immerse the stove in water.
- Use only with compatible cookware.
FAQs
Q: What does warning signal E4 indicate?
A: Warning signal E4 indicates that the electricity voltage is too low for
safe operation. Ensure proper voltage supply before using the stove.
Parts list
- Body
- Plate
- Control panel
- Rotate switch
USER MANUAL
IMPORTANT SAFETY INSTRUCTIONS
Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. If you give this device to other people, please also pass on the operating instructions.
- The appliance is designed exclusively for private use and for the envisaged purpose. This appliance is not fit for commercial use.
- Do not use it outdoors. Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. If the appliance is humid or wet, unplug it immediately.
- When cleaning or putting it away, switch off the appliance and always pull out the plug from the socket (pull the plug itself, not the lead) if the appliance is not being used and remove the attached accessories.
- Do not operate the device without supervision. If you leave the room you should always turn the device off. Remove the plug from the socket.
- The device and the mains lead have to be checked regularly for signs of damage. If damage is found the device must not be used.
- Do not try to repair the appliance on your own. Always contact an authorized technician. To avoid the exposure to danger, always have faulty cable be replaced only by the manufacturer, by our customer service or by qualified person and with a cable of the same type.
- Use only original spare parts.
- To avoid damaging it, do not place any rough or uneven objects onto the surface.
- Prevent any hard or pointy utensils from falling onto the surface.
- Do not place the appliance near objects which are sensitive to magnetic fields (e.g. radio, TV).
- Place the unit onto a level surface resistant to moisture and heat.
- In case of sensitive surfaces, place a heat-resistant plate under the unit.
- Because of the rising heat and vapors, do not operate the unit under suspended cupboards.
- Keep a sufficient safety distance (30 cm) from easily flammable objects like furniture, curtains, etc.!
- Do not heat empty cooking utensils on the hotplate, as this can lead to dangerous over-temperatures.
- Do not move the device when it is in use.
- During use, ensure that the mains lead does not come into contact with hot sections of the device.
- Do not touch the hot parts of the device.
- Please do not operate the device with an external timer or a separate remote control system
- Always check the temperature of prepared meals, especially if it is suggested to children. Allow the dish to cool down after cooking.
- In order to ensure your children’s safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.
- This device is not intended to be used by individuals (including children) who have restricted physical, sensory or mental abilities and/or insufficient knowledge and/or experience, unless they are supervised by an individual who is responsible for their safety or have received instructions on how to use the device.
- Children should be supervised at all times in order to ensure that they do not play with the device.
SPECIAL SAFETY INSTRUCTIONS FOR THIS DEVICE
WARNING: Danger of burns!
During operation the temperature of the exposed surface may be very hot.
Therefore, only touch the appliance at the thermostat controls.
WARNING: Damage of surface!
If the surface is damaged or has cracks the device must be switched off to
avoid the hazard of electrical shocks.
WARNING:
- Metal objects as, e.g., knives, forks, spoons and pot lids should not be placed on the cooking zone as they may get hot.
- Hot surface! The cooker initially heats only the base of the cooking utensils used, not the cooking zone itself. However, because of the heat radiated during cooking, dangerously high temperatures may also occur at the cooking zone after the cooking cycle. Hazard of burns!
- Potential damage to your health! People wearing pacemakers must not use this cooker. You should keep a minimum distance of 60 cm to the appliance when it is in use.
CLEANING AND MAINTENANCE
- Unplug the appliance from the power supply before cleaning.
- Let the unit cool down completely.
- Wipe external surfaces with a damp cloth with some washing-up liquid. Do not use abrasive detergents, any organic solvent or aggressive chemicals.
USAGE
After you have connected the device’s plug to the main supply, the device is
in standby mode. A signal will sound. The display will show
- Put a suitable pot on the cooking zone.
- Press button.
- Press button, then choose function. This hot plate is specially designed with 6 cooking functions which are the most popular cooking methods:
- MULTICOOK: Initial setting start 270℃, you can select temperature from 80 to 270℃ with the rotate switch. There are 9 levels of temperature are selectable: 80/100/120/160/180/200/220/240/270°C.
- FRY: Initial setting start 200℃, you can select temperature from 80 to 270℃ with the rotate switch.
- STEW: Initial setting start 1600W, you can select power from 200W to 3200W with the rotate switch. There are 9 levels of power are selectable: 200/600/800/1000/1300/1600/1800/2100/3200W.
- SOUP/BROTH: Initial setting start 1800W.
- BOIL: Initial setting start 1800W.
- CHEF: Initial setting start 800W.
- LOCK: In standby mode, press key for 3 seconds to enter child lock mode. Pressing other keys is invalid. If you want to cancel, press the “LOCK” key again for 3 seconds to cancel.
- STOP: In the heating working state, touch the key to temporarily stop the heating of the cooker, and touch again when the nixie tube displays “STOP”. key can restore the cooker to its original working state.
Set up timer/preset
-
Press “ON/OFF” button.
-
Press button, then choose function MULTICOOK / FRY / STEW, then press “TIMER” button. The display shows”0:00″. Rotate the switch to set the time.
NOTE: This timer means the device will keep working for the time you input. After the set time has elapsed, the device will come back to standby mode. You can select from 0-3 hours. -
When you choose function BOIL / SOUP/BROTH / CHEF, then press “TIMER/PRESET” button, the display shows”0:00″. Rotate the switch to set the time. The display will show the desired setting.
NOTE: This setting means the device will come back to standby mode immediately after you input the time. After the set time has elapsed, the device will start to work under the functions you selected. You can select from 0-24 hours. -
You may change the previous timer/preset at any time. The other settings will remain.
-
To cancel the timer/preset, select the display to “0:00″. The cooking plate will keep the function which you have chosen before. You may also turn the appliance off directly with the“ON/OFF” button.
PAN RECOGNITION
The device has a pot recognition function. It gives several warnings to
indicate that the cookware has been removed. The message“E0″ appears on the
display. For safety reasons, the appliance will switch to standby mode after
about 60 seconds. The fan may continue running. In this context, please pay
attention to the following:
WARNING: After use, the hot plate is to be switched off by means of its regulation and control devices (ON/OFF button) and not just by pan recognition.
WARNING: Hazard of burns!
Because of the heat radiated during cooking, dangerously high temperatures may
occur at the cooking zone after the cooking cycle.
Choosing the dishes
In order for the induction cooker to work correctly, it is necessary to use
dishes whose bottom is ferromagnetic (attracts a magnet).
Dishes made of the following materials are not suitable for induction cookers:
clay, glass or aluminum.
Do not use the following types of pots:
- Pots with curved (convex/parabolic) bases.
- Dishes with a base diameter of less than 12 cm. The recommended diameter of the base is from 12 to 22 cm.
- Dishes on legs.
ATTENTION: Dishes made of glass, ceramics, and non-ferrous metals, with a bottom made of aluminum or copper, diches with bottom diameter less than 12 cm is NOT SUITABLE!
ERROR MESSAGES
During operation the following error messages can be displayed:
SPECIFICATION
Power supply
Producer: COSMOS FAR VIEW INTERNATIONAL LIMITED-ROOM 701, 16 APT, LANE 165,
RAINBOW NORTH STREET, NINGBO, CHINA
Made in China
220-240 V ~ 50/60Hz
WARRANTY DOES NOT COVER SUPPLIES (filters, ceramic and non-stick coating,
rubber seals, etc.) Production date is available in the serial number located
on the identification sticker on the gift box and/or on sticker on the device.
The serial number consists of 13 characters, the 4th and 5th characters
indicate the month, the 6th and 7th indicate the year of device production.
Producer may change the complete set, appearance, country of manufacture,
warranty and technical characteristics of the model without notice. Please
check when purchasing device. Current information about service centers is
available on the website http://multimarta.com/