SIEMENS LR18HLT25 Ceiling Mounted Ventilation System Instruction Manual

: June 16, 2024
: SIEMENS

SIEMENS LR18HLT25 Ceiling Mounted Ventilation System

Product Information

Specifications

Model: LR18HLT25
Type: Ceiling-mounted ventilation system
Brand: Siemens Home Appliances

Product Usage Instructions

Safety

Safe use

WARNING:

Risk of suffocation!
Children may put packaging material over their heads or wrap themselves up in it and suffocate. Keep packaging material away from children. Do not let children play with packaging material. Children may breathe in or swallow small parts, causing them to suffocate. Keep small parts away from children. Do not let children play with small parts.
Risk of fire!
Fatty deposits in the grease filters may catch fire. Never operate the appliance without a grease filter. Clean the grease filters regularly. Never work with naked flames close to the fuel heating appliance (e.g. wood- or coal-burning) unless the heating appliance has a sealed, non-removable cover. There must be no flying sparks.
Risk of burns!
The accessible parts of the appliance become hot during operation. Never touch these hot parts. Keep children at a safe distance. The appliance becomes hot during operation. Allow the appliance to cool down before cleaning.
Risk of injury!
Components inside the appliance may have sharp edges. Carefully clean the appliance interior. Items placed on the appliance may fall off. Do not place any objects on the appliance. Changes to the electrical or mechanical assembly are dangerous and may lead to malfunctions. Do not make any changes to the electrical or mechanical assembly. The filter cover may swing out. Open the filter cover slowly. Take hold of the filter cover after opening until it no longer swings out. Close the filter cover slowly.
Risk of injury when opening and closing the hinges.

Keep your hands away from the hinges.

WARNING:

Risk of serious harm to health!
Children may swallow batteries. Keep batteries out of the reach of children. Swallowing can lead to chemical burns, perforation of soft tissue, and death. Severe burns can occur within 2 hours of ingestion. Seek medical attention immediately.
Risk of injury!
Children may swallow batteries. Keep batteries out of the reach of children. Keep an eye on any children when you are replacing batteries. Batteries may explode. Do not charge the batteries. Do not short-circuit the batteries. Do not throw batteries into a fire.

Preventing Material Damage
Hot oil or grease ignites very quickly. Always supervise hot oil and fat. Never extinguish burning oil or fat with water.

Environmental Protection and Saving
No information provided in the text extract.

Installation Instructions
No information provided in the text extract.

Secure Installation
No information provided in the text extract.

FAQ

Q: Can I operate the appliance without a grease filter?
A: No, operating the appliance without a grease filter is not recommended as it may lead to a risk of fire.

Q: How often should I clean the grease filters?
A: It is recommended to clean the grease filters regularly to prevent fatty deposits from catching fire.

Q: Can I place objects on the appliance?
A: No, it is not recommended to place any objects on the appliance as they may fall off and cause injury.

Q: Can I make changes to the electrical or mechanical assembly?
A: No, making changes to the electrical or mechanical assembly is dangerous and may lead to malfunctions. It is advised not to make any changes.

Q: How should I handle batteries?
A: Keep batteries out of the reach of children to prevent swallowing, chemical burns, and other injuries. Do not charge, short-circuit, or throw batteries into a fire.

User manual and installation instructions

Register your appliance on My Siemens and discover exclusive services and offers.

Safety

Observe the following safety instructions.

General information

Read this instruction manual carefully.
Keep the instruction manual and the product information safe for future reference or for the next owner.
Do not connect the appliance if it has been damaged in transit.

Intended use
This appliance is designed only to be built into kitchen units. Read the special installation instructions.
The appliance can only be used safely if it is correctly installed according to the safety instructions.
The installer is responsible for ensuring that the appliance works perfectly at its installation location.

Only use this appliance:

For extracting cooking vapour.
in private households and in enclosed spaces in a domestic environment.
up to an altitude of max. 2000 m above sea level.

Do not use the appliance:

With an external timer.

Restriction on user group
This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inadequate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting dangers.

Do not let children play with the appliance.
Children must not perform cleaning or user maintenance unless they are at least 15 years old and are being supervised.
Keep children under the age of 8 years away from the appliance and power cable.

Safe use

WARNING ‒ Risk of suffocation!
Children may put packaging material over their heads or wrap themselves up in it and suffocate.

Keep packaging material away from children.
Do not let children play with packaging material.
Children may breathe in or swallow small parts, causing them to suffocate.
Keep small parts away from children.
Do not let children play with small parts.

WARNING ‒ Risk of fire!
Fatty deposits in the grease filters may catch fire.

Never operate the appliance without a grease filter.
Clean the grease filters regularly.
Never work with naked flames close to the appliance (e.g. flambéing).
Do not install the appliance near a solid fuel heating appliance (e.g. wood- or coal burning) unless the heating appliance has a sealed, non-removable cover. There must be no flying sparks.

Hot oil or grease ignites very quickly.

Always supervise hot oil and fat.
Never extinguish burning oil or fat with water. Switch off the cooking zone. Extinguish flames carefully using a lid, fire blanket or something similar.
When gas burners are in operation without any cookware placed on them, they can build up a lot of heat. A ventilation appliance installed above the cooker may become damaged or catch fire.
Only operate the gas burners with cookware on them.
Operating multiple gas hobs at the same time generates a great deal of heat. A ventilation appliance installed above the cooker may become damaged or catch fire.
Only operate the gas hobs with cookware on them.
Select the highest fan setting.
Never operate two gas hobs simultaneously on the highest flame for longer than 15 minutes. Two gas hobs correspond to one large burner.
Never operate large burners of more than 5 kW with the highest flame for longer than 15 minutes, e.g. a wok.WARNING ‒ Risk of burns!
The accessible parts of the appliance become hot during operation.
Never touch these hot parts.
Keep children at a safe distance.
The appliance becomes hot during operation.
Allow the appliance to cool down before cleaning.WARNING ‒ Risk of injury!
Components inside the appliance may have sharp edges.
Carefully clean the appliance interior.
Items placed on the appliance may fall off.
Do not place any objects on the appliance.
Changes to the electrical or mechanical assembly are dangerous and may lead to malfunctions.
Do not make any changes to the electrical or mechanical assembly.
The filter cover may swing out.
Open the filter cover slowly.
Take hold of the filter cover after opening until it no longer swings out.
Close the filter cover slowly.

Risk of injury when opening and closing the hinges.

Keep your hands away from the hinges.
The light emitted by LED lights is very dazzling, and can damage the eyes (risk group 1).
Do not look directly into the switched-on LED lights for longer than 100 seconds.WARNING ‒ Risk of serious harm to health!
Children may swallow batteries.
Keep batteries out of the reach of children.
Swallowing can lead to chemical burns,perforation of soft tissue, and death. Severe burns can occur within 2 hours of ingestion. Seek medical attention immediately.WARNING ‒ Risk of injury!
Children may swallow batteries.
Keep batteries out of the reach of children.
Keep an eye on any children when you are replacing batteries.
Batteries may explode.
Do not charge the batteries.
Do not short-circuit the batteries.
Do not throw batteries into a fire.
If the appliance is operated by another person via the Home Connect app during cleaning,this increases the risk of injury.
Before cleaning, disconnect the appliance from the Home Connect app.WARNING ‒ Risk of electric shock!
If the appliance or the power cord is damaged, this is dangerous.
Never operate a damaged appliance.
Never pull on the power cord to unplug theappliance. Always unplug the appliance at the mains.
If the appliance or the power cord is damaged, immediately unplug the power cordor switch off the fuse in the fuse box.
Call customer services. → Page 13
Improper repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist staff.
Only use genuine spare parts when repairing the appliance.
If the power cord of this appliance is damaged, it must be replaced by trained specialist staff.

An ingress of moisture can cause an electric shock.

Before cleaning, pull out the mains plug or switch off the fuse in the fuse box.
Do not use steam- or high-pressure cleaners to clean the appliance.WARNING ‒ Risk of explosion!
Highly caustic alkaline or highly acidic cleaning agents in conjunction with aluminium parts in the interior of the appliance may cause explosions.
Never use highly caustic alkaline or highly acidic cleaning agents. In particular, do not use commercial or industrial cleaning agents in conjunction with aluminium parts,e.g. grease filters on extractor hoods.WARNING ‒ Risk of fire!
Fatty deposits in the grease filters may catch fire.
Clean the grease filters regularly.

WARNING ‒ Risk of injury!

Improper repairs are dangerous.

Repairs to the appliance should only be carried out by trained specialist staff.
If the appliance is defective, call customer service.→ “Customer Service”, Page 13
If appliances supported by cables oscillate,this may overload the fastening elements. Theappliance may fall down.
Do not do anything that makes the appli-ance oscillate.
Oscillating movement of the appliance may result in injury.
Do not do anything that makes the appli-ance oscillate.
When moving the appliance up and down,leave sufficient distance to the appliance.WARNING ‒ Risk of electric shock!
Penetrating moisture may cause an electric shock.
Do not use wet sponge cloths.

Preventing material damage

General
Follow these instructions when using the appliance.

ATTENTION!
Condensate may cause corrosion damage.

To prevent condensation from building up, switch onthe appliance during cooking.
If moisture gets into the controls, this may result indamage.
Never clean controls with a wet cloth.
Incorrect cleaning damages the surfaces.
Follow the cleaning instructions.
Do not use harsh or abrasive detergents.
Clean stainless steel surfaces in the direction of the finish only.
Never clean controls with stainless steel cleaners.

Condensation that flows back in may damage the appliance.

The air extraction duct must be installed with a gradient of at least 1° from the appliance.
If you put incorrect stress on the design elements, they may break off.
Do not pull design elements.
Do not place objects on the design elements or hang objects from them.
Leaking batteries may damage the remote control.
Remove the batteries if you are not using the remote control.
Safely dispose of the empty or defective batteries in an environmentally friendly manner.
There is a risk of surface damage if you do not peel off the protective film.
Remove the protective film from all parts of the appliance before using for the first time.

Environmental protection and saving energy

Disposing of packaging
The packaging materials are environmentally compatible and can be recycled.

Sort the individual components by type and dispose of them separately.

Saving energy
If you follow these instructions, your appliance will use less power.
Adjust the fan speed to the amount of steam produced during cooking.

The lower the fan speed, the less energy is consumed.
Only use the intensive mode as required.

If cooking produces large amounts of steam, select a higher fan speed in good time.

The odours are distributed around the room less.

Switch off the lighting if it is no longer required.

When the lighting is switched off, it does not consume any energy.

Clean or replace the filters at regular intervals.

The effectiveness of the filter is retained.

Put the cooking lid on.

The cooking vapours and condensation are reduced.

Only use the additional functions if required.

Switching off additional functions reduces power consumption.

Operating modes

The saturation indicator must be adjusted to the selected operating mode and the filters used.
“Setting the saturation indicator”, Page 8

Air recirculation
The air which is drawn in is cleaned by the grease filters and an odour filter, and conveyed back into the room.
To bind odours in air recirculation mode, you must install an odour filter.
The different options for operating the appliance in air circulation mode can be found in our catalogue. Alternatively,ask your dealer. The required accessories are available from specialist retailers, from our after-sales service or from the online shop.
“Accessories”, Page 14

Familiarising yourself with your appliance

Controls
You can use the controls to configure all functions of your appliance and to obtain information about the operating status.

Tip: Align the remote control as precisely as possible to the infrared receiver for the LED display.

LED display
Die LED-Anzeige zeigt eingestellte Werte und Funktionen.

1	Fan setting 1/grease filter saturation display
2	Fan setting 2/odour filter saturation indicator
3	Fan setting 3
4	Intensive mode 1
5	Intensive mode 2
6	Automatic mode 1/fan run-on time/interval vent- ilation
7	Home Connect
8	Infrared receiver

1 Depending on the appliance specifications

Before using for the first time

Configure the settings for initial start-up. Clean the appliance and accessories.

Setting an operating mode
Your appliance is set to air recirculation mode by default.

Note: When using it in circulating-air mode, you require additional accessories.

When using it in circulating-air mode, set the operating mode.

Basic operation

Switching on the appliance
Requirement: Align the remote control as precisely as possible to the infrared receiver for the LED display.

Press to switch on the appliance.
- The appliance starts at fan setting 2.
- The LED for fan setting 2 lights up in the LED display.
- The appliance moves to the last saved position.

Switching off the appliance
Switch the appliance off when you are not using it.

Press to switch the appliance off.
The fan run-on is switched on, LED 6 flashes in the LED display for the fan run-on.
The appliance moves into the fan run-on position.
The fan automatically switches off after approx. 10 minutes.
The appliance moves up as far as it will go.

Lift function
The appliance detects the last selected position and stores this automatically. When the appliance is next switched on, it moves into this position, provided no other position is set.

Note: Further settings relating to the position of the appliance are available in the Home Connect app.

Moving the appliance down

Press ⁠.
- The appliance moves down.
  Note:
- Briefly press to move the appliance down into the last saved position.
- Press and hold for approx. 3 seconds to move the appliance down as far as it will go.

Moving the appliance up

Press ⁠.
- The appliance moves up.
  Note:
- Briefly press to move the appliance up into the last saved position.
- Press and hold for approx. 3 seconds to move the appliance up as far as it will go.

Selecting a fan setting

Press ⁠ or ⁠.
- The LED for the set fan setting lights up in the LED display.

Switching on intensive mode
If particularly strong odours or vapours develop, you can use intensive mode.

Press ⁠ repeatedly until LED 4 lights up in the LED display for intensive mode 1.
Press ⁠ repeatedly until LED 5 lights up in the LED display for intensive mode 2.
- After approx. 6 minutes, the appliance automatically switches to fan setting 3.

Switching off intensive mode

To select a fan setting of your choice, press ⁠.

Switching on the fan run-on

During the fan run-on, the appliance continues to run for a short time and then switches off automatically.
The fan run-on removes remaining odours and is used to dry the odour filter after the cooking process.

LED 1 for the fan setting lights up in the LED display.
LED 6 flashes for the fan run-on.
The appliance switches off automatically after approx. 10 minutes.

Switching off the fan run-on

Press ⁠.
- This temporarily stops the fan run-on.

Intermittent ventilation
In order to regularly ventilate your kitchen, you can use the interval ventilation. With interval ventilation, the ventilation system switches on and off in the selected setting for the selected time.

Note: This function is only available in the Home Connect app.
If the interval ventilation is switched on, LED 6 continuously flashes in the LED display for the interval ventilation and the LED for the selected fan setting lights up.
As soon as the ventilation time ends, the LED for the fan setting you have selected goes out. LED 6 continues to flash.

Switching on automatic mode1
The optimum fan setting is set automatically using a sensor.

Press ⁠.
- In the LED display, LED 6 lights up for automatic mode.

Switching off automatic mode1

Press ⁠.
- The appliance switches to the fan setting that was previously set.
- The ventilation is automatically ended when the sensor detects no further change in the room air quality.
- Automatic mode runs for a maximum of four hours.
  Note: If automatic mode is ended using the ⁠ button, the appliance moves to the run-on position. After approx. 10 minutes, the appliance switches off automatically and moves up as far as it will go.

Sensor sensitivity 1
In automatic mode, a sensor in the appliance detects the intensity of the cooking odours and roasting odours. Depending on the setting of the sensor sensitivity,the optimum fan setting is automatically switched on.
If the sensor control reacts too weakly or too strongly, you can change the setting for the sensor sensitivity.

Default setting: Fan setting 3
Lowest setting: Fan setting 1
Highest setting: Fan setting 5

Setting the sensor sensitivity1

Requirement: The appliance is switched off.

Press and hold ⁠ and ⁠ for approx. 3 seconds.
Press ⁠ or to change the setting.
To cancel the setting, press ⁠.
To save the setting, press and hold ⁠ and for approx. three seconds.
Or wait approx. 10 seconds until the setting is saved automatically.
- A signal tone sounds as soon as the selected setting is saved.

Switching on the boost function

Press ⁠.
- After approx. 20 seconds, the fan automatically switches back to the fan setting that was previously set.

Switching off the boost function

Press ⁠.
- The boost function is ended before the preset time expires.

Saturation indicator
If the grease filters or odour filters are saturated, corresponding symbols flash after the appliance is switched off.

Note: You can set the saturation indicator in the Home Connect app depending on the filter used.
Clean the saturated grease filters and, in doing so, observe the cleaning instructions in these instructions.
Change the saturated odour filters and observe the instructions in the accompanying instructions.
If odour filters can be regenerated, follow the instructions in the accompanying instructions.

Setting the saturation indicator
The saturation indicator must be adjusted depending on the filter used.
Requirement: The appliance is switched off.

Press and hold ⁠ and ⁠ for approx. three seconds.
- To set circulating-air mode (non-regenerable filter), press ⁠/ until LED 2 lights up in the LED display.
- To set circulating-air mode (non-regenerable filter), press ⁠ / until LED 3 lights up in the LED display.
- To convert the electronic control back to operation without the air recirculation filter, press ⁠/ until LED 1 lights up on the LED display.
To save the setting, press and hold ⁠ and ⁠ for approx. three seconds.
Or wait approx. 10 seconds until the setting is saved automatically.

To cancel the setting, press ⁠.

A signal tone sounds as soon as the selected setting is saved.

Resetting the saturation indicator
After cleaning the grease filter or after changing the odour filter, the saturation indicator can be reset.

Requirements

After the appliance has been switched off, LED 1 flashes in the LED display for the grease filter saturation display and/or LED 2 flashes for the saturation indicator for the odour filter.
A signal sounds repeatedly.
Press .
- The saturation indicator is reset.

Switching on the lighting
The lighting can be switched on and off independently of the ventilation system.

Press ⁠.

Switching off the lighting

Switch off the lighting with ⁠.

Setting the brightness

Press and hold down ⁠.
Note: Colour temperature settings are available in the Home Connect app provided the appliance has this function.

Switching on the button tone
The button tones can be switched on.
Requirement: The appliance is switched off.

Press and hold ⁠ and ⁠ for approx. three seconds.
- In the LED display, the LED for the setting that is currently selected lights up.
Press ⁠ or ⁠ until LED 1 lights up in the LED display.
To cancel the setting, press ⁠.
To save the setting, press and hold ⁠ and for approx. three seconds.
Or wait approx. 10 seconds until the setting is saved automatically.
- A signal tone sounds as soon as the selected setting is saved.

Switching the button tone off
The button tones can be switched off.

Note: Signal tones for the appliance are always
switched on and cannot be switched off.
Requirement: The appliance is switched off.

Press and hold ⁠ and ⁠ for approx. three seconds.
- In the LED display, the LED for the setting that is currently selected lights up.
Press ⁠ or ⁠ until LED 2 lights up in the LED display.
To cancel the setting, press ⁠.
To save the setting, press and hold ⁠ and for approx. three seconds.
Or wait approx. 10 seconds until the setting is saved automatically.
- A signal tone sounds as soon as the selected setting is saved.

Resetting the appliance to the factory settings

Requirement: If you reinstall the appliance after disassembly,you will need to reset the appliance to the factory settings so that the reference movement is carried out correctly.

Press and hold and and .
- The reference movement is started and determines the correct actual position of the appliance with a reference switch.

Home Connect
This appliance is network-capable. Connecting your appliance to a mobile device lets you control its functions via the Home Connect app, adjust its basic settings and monitor its operating status.
The Home Connect services are not available in every country. The availability of the Home Connect function depends on the availability of Home Connect services in your country. You can find information about this at: www.home- connect.com.
The Home Connect app guides you through the entire login process. Follow the instructions in the Home Connect app to configure the settings.
If the appliance is not connected to your home network, it functions as an appliance with no network connection and can still be operated via the display.

Tip: Please also follow the instructions in the Home Connect app.

Notes

Please note the safety precautions in this instruction manual and make sure that they are also observed when operating the appliance via the Home Connect app.
“Safety”, Page 2
Operating the appliance on the appliance itself always takes priority. During this time it is not possible to operate the appliance using the Home Connect app.
In networked standby mode, the appliance requires a maximum of 2 W.
If you need your device’s MAC address to connect to your home network, you can find this next to the rating plate. → Page 14

Setting up Home Connect

Requirements

The appliance is switched off.
You have a mobile device with a current version of the iOS or Android operating system, e.g. a smartphone.
The mobile device and the appliance are within range of your home network’s Wi-Fi signal.
1. Download the Home Connect app.
2. Open the Home Connect app and scan the following QR code.
3. Follow the instructions in the Home Connect app.

Resetting the connection
Saved connections to the home network and to Home Connect can be reset.

Press and ⁠ until LED 7 goes out in the LED display.
- An audible signal sounds.

Software update
Your appliance’s software can be updated using the software update function, e.g. for the purposes of optimisation, troubleshooting or security updates.
To do this, you must be a registered Home Connect user, have installed the app on your mobile device and be connected to the Home Connect server.
As soon as a software update is available, you will be informed via the Home Connect app and will be able to start the software update via the app. Once the update has been successfully downloaded, you can start installing it via the Home Connect app if you are in your home network (Wi-Fi). The Home Connect app informs you once installation is successful.

Notes

The software update consists of two steps.
- The first step is the download.
- The second step is the installation on your appliance.
You can continue to use your appliance as normal while updates are downloading. Depending on your personal settings in the app, software updates can also be set to download automatically.
Installation takes a few minutes. You cannot use your appliance during installation.
We recommend that you install security updates as soon as possible.

Remote diagnostics
Customer Service can use Remote Diagnostics to access your appliance if you contact them, have your appliance connected to the Home Connect server and if
Remote Diagnostics is available in the country in which you are using the appliance.

Tip: For further information and details about the availability of Remote Diagnostics in your country, please visit the service/support section of your local website: www.home-connect.com.

Data protection
Please see the information on data protection.
The first time your appliance is registered on a home network connected to the Internet, your appliance will transmit the following types of data to the

Home Connect server (initial registration):

Unique appliance identification (consisting of appliance codes as well as the MAC address of the Wi-Fi communication module installed).
Security certificate of the Wi-Fi communication module (to ensure a secure data connection).
The current software and hardware version of your appliance.
Status of any previous reset to factory settings.
This initial registration prepares the Home Connect functions for use and is only required when you want to use the Home Connect functions for the first time.

Note: Please note that the Home Connect functions can only be utilized with the Home Connect app. Information on data protection can be retrieved in the Home Connect app.

Hob-based hood control

You can connect your appliance to a suitable hob and,in this way, control the functions of your appliance via the hob.
If the hob and the extractor hood are Home Connect-compatible, connect the appliances in the Home Connect app. To do this, connect the two appliances to Home Connect and follow the instructions in the app.

Notes

Please note the safety precautions in the instruction manual for your appliance and ensure that they are also observed when operating the appliance via the hob-based hood control.
Operating your appliance always takes priority. It is not possible to use the hob-based hood control during this time.
You can only connect to the extractor hood via the Home Connect app. Other connection routes are no longer supported.

Cleaning and servicing

To keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully.

Cleaning products
You can obtain suitable cleaning products from after-sales service or the online shop.WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.

Before cleaning, pull out the mains plug or switch off the fuse in the fuse box.
Do not use steam- or high-pressure cleaners to clean the appliance.

WARNING ‒ Risk of burns!
The appliance becomes hot during operation.

Allow the appliance to cool down before cleaning.
ATTENTION!
Unsuitable cleaning products may damage the surfaces of the appliance.
Do not use harsh or abrasive detergents.
Do not use cleaning products with a high alcohol content.
Do not use hard scouring pads or cleaning sponges.
Only use glass cleaners, glass scrapers or stainless steel care products if recommended in the cleaning instructions for the relevant part.
Wash sponge cloths thoroughly before use.

Cleaning the appliance
Clean the appliance as specified. This will ensure that the different parts and surfaces of the appliance are not damaged by incorrect cleaning or unsuitable cleaning products.

WARNING ‒ Risk of explosion!
Highly caustic alkaline or highly acidic cleaning agents in conjunction with aluminium parts in the interior of theappliance may cause explosions.

Never use highly caustic alkaline or highly acidic cleaning agents. In particular, do not use commercial or industrial cleaning agents in conjunction with aluminum parts, e.g. grease filter on extractor hoods.

WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.

Before cleaning, pull out the mains plug or switch off the fuse in the fuse box.
Do not use steam- or high-pressure cleaners to clean the appliance.

WARNING ‒ Risk of burns!
The appliance becomes hot during operation.

Allow the appliance to cool down before cleaning.

WARNING ‒ Risk of injury!
Components inside the appliance may have sharp edges.

Carefully clean the appliance interior.
If the appliance is operated by another person via the Home Connect app during cleaning, this increases the risk of injury.
Before cleaning, disconnect the appliance from the Home Connect app.
1. Observe the information regarding the cleaning agents. → “Cleaning products”, Page 10
2. Clean as follows, depending on the surface:
- Clean stainless steel surfaces in the direction of the finish using a sponge cloth and hot soapy water.
- Clean painted surfaces using a damp sponge cloth and hot soapy water.
- Clean aluminum using a soft cloth and glass cleaner.
  Clean plastic using a soft cloth and glass cleaner.
- Clean glass using a soft cloth and glass cleaner.
1. Dry with a soft cloth.
2. Apply a thin layer of the stainless steel cleaning product to stainless steel surfaces using a soft cloth.

You can obtain stainless steel cleaning products from the after-sales service or the online shop.

Cleaning controls and lights

WARNING ‒ Risk of electric shock!
Penetrating moisture may cause an electric shock.

Do not use wet sponge cloths.
1. Observe the information regarding the cleaning agents.
  → “Cleaning products”, Page 10
2. Clean using a damp sponge cloth and hot soapy water.
3. Dry with a soft cloth.
4. Cleaning grease filters in the dishwasher
  The grease filters filter the grease from the cooking vapour.
  Regularly cleaned grease filters guarantee a high level of grease removal. We recommend cleaning the grease filters every two months.

WARNING ‒ Risk of fire!
Fatty deposits in the grease filters may catch fire.

Clean the grease filters regularly.

ATTENTION!
The grease filters may become damaged if they are squeezed in the dishwasher.

Do not squeeze the grease filters.
Note: When cleaning the grease filter in the dishwasher, light discoloration may occur. This discoloration has no effect on the performance of the metal grease filters.

Requirement: The grease filters have been removed.

Observe the information regarding the cleaning agents.
→ “Cleaning products”, Page 10
Place the grease filters loosely into the dishwasher.
Do not clean heavily soiled grease filters with utensils.
Use special grease solvents for stubborn dirt. You can obtain grease solvents from customer service or the online shop.
Start the dishwasher.
Select a temperature of no more than 70 °C.
Allow the grease filters to drain.

Cleaning grease filters manually
The grease filters filter the grease from the cooking vapour.
Regularly cleaned grease filters guarantee a high level of grease removal. We recommend cleaning the grease filters every two months.

WARNING ‒ Risk of fire!
Fatty deposits in the grease filters may catch fire.

Clean the grease filters regularly.

Requirement: The grease filters have been removed.

Observe the information regarding the cleaning agents.
→ “Cleaning products”, Page 10
Soak the grease filter in hot soapy water.
Use special grease solvent for stubborn dirt. You can obtain grease solvents from customer service or the online shop.
Use a brush to clean the grease filters.
Rinse the grease filters thoroughly.
Allow the grease filters to drain.

Fitting grease filters

ATTENTION!
Falling grease filters may damage the hob below.

Grip below the grease filter with one hand.
1. Fit the grease filters.
2. Fold the grease filters upwards and engage the locks.
3. Make sure that the locks engage.
4. Close the filter cover.
5. Make sure that the filter cover locks engage correctly.

Odour filter for recirculating air mode
You can obtain odour filters from the after-sales service or the online shop. Only use original odour filters.
→ “Accessories”, Page 14

Replacing the odour filter

Requirement: The grease filters have been removed.

Remove the odour filter.
Remove the new odour filter from the packaging.
Insert the odour filter.
Insert the odour filter in the correct direction.
→ “Fitting grease filters”, Page 11.

Replacing the batteries in the remote control

WARNING ‒ Risk of injury!
Children may swallow batteries.

Keep batteries out of the reach of children.
Keep an eye on any children when you are replacing batteries.
Batteries may explode.
Do not charge the batteries.
Do not short-circuit the batteries.
Do not throw batteries into a fire.

ATTENTION!
Improper handling of batteries.

Do not short-circuit the terminals.
Only use the specified type of batteries.
Do not use different battery types together.
Do not use new and used batteries together.
Do not use rechargeable batteries.
Leaking batteries may damage the remote control.
Remove the batteries if you are not using the remote control.
Safely dispose of empty or defective batteries in an environmentally friendly manner.
1. Remove the cover. ⁠1 2
2. Remove the empty batteries. 3
3. Insert the new batteries (3 V CR 2032) 1.
4. Close the cover.2 3
5. Dispose of the empty batteries in an environmentally friendly manner.

Troubleshooting

You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs.

WARNING ‒ Risk of injury!
Improper repairs are dangerous.

Repairs to the appliance should only be carried out by trained specialist staff.
If the appliance is defective, call Customer Service.
→ “Customer Service”, Page 13

WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.

Repairs to the appliance should only be carried out by trained specialist staff.
Only use genuine spare parts when repairing the appliance.
If the power cord of this appliance is damaged, it must be replaced by trained specialist staff.

Malfunctions

Disposal

Disposing of old appliance
Valuable raw materials can be reused by recycling.

Unplug the appliance from the mains.
Cut through the power cord.
Dispose of the appliance in an environmentally friendly manner.
Information about current disposal methods are available from your specialist dealer or local authority.

This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE).
The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.

Disposing of batteries
Batteries should be recycled in an environmentally friendly manner. Do not dispose of the batteries in the household rubbish.

Dispose of batteries in an environmentally friendly manner.

According to the European Guideline 2006/66/EC, defective or used battery packs/batteries, must be collected separately and disposed of in an environmentally correct manner.

Customer Service
Function-relevant genuine spare parts according to the corresponding Ecodesign Order can be obtained from Customer Service for a period of at least 10 years from the date on which your appliance was placed on the market within the European Economic Area.

Note: Under the terms of the manufacturer’s warranty the use of Customer Service is free of charge.
Detailed information on the warranty period and terms of warranty in your country is available from our aftersales service, your retailer or on our website.

If you contact Customer Service, you will require the product number (E-Nr.) and the production number (FD) of your appliance. The contact details for Customer Service can be found in the enclosed Customer Service directory or on our website.
This product contains light sources from energy efficiency class F. These light sources are available as a spare part and should only be replaced by trained specialist staff.

Product number (E-Nr.) and production number (FD)
You can find the product number (E-Nr.) and the production number (FD) on the appliance’s rating plate.

Depending on the model, the rating plate can be found:
Inside the appliance (remove grease filters for access).
On top of the appliance.
Make a note of your appliance’s details and the Customer Service telephone number to find them again quickly

Accessories

You can buy accessories from the after-sales service,from specialist retailers or online. Only use original accessories, as these have been specifically designed for your appliance.
Accessories vary from one appliance to another. When purchasing accessories, always quote the exact product number (E no.) of your appliance. → Page 14
You can find out which accessories are available for your appliance in our catalogue, in the online shop or from our after-sales service.

siemens-home.bsh-group.com

Accessories	Order number
Clean Air Plus odor filter (replacement)	LZ21JXB16
Long Life odour filter (re- placement)	LZ20JXP00

Declaration of Conformity

BSH Hausgeräte GmbH hereby declares that the appliance with Home Connect functionality conforms to the basic requirements and other relevant provisions of Directive 2014/53/EU.
A detailed RED Declaration of Conformity can be found online at siemens-home .bsh-group.com among the additional documents on the product page for your appliance.

Hereby, BSH Hausgeräte GmbH declares that the appliance with Home Connect functionality is in compliance with relevant statutory requirements.1
A detailed Declaration of Conformity can be found online at siemens-home.bsh- group.com/uk/ among the additional documents on the product page for your appliance.1

2.4 GHz band (2400–2483.5 MHz): Max. 100 mW 5-GHz band (5150–5350 MHz + 5470–5725 MHz): max. 50 mW

Installation instructions

Observe this information when installing the appliance.

Included with the appliance
After unpacking all parts, check for any damage in transit and completeness of the delivery.

Dimensions
You will find the dimensions of the appliance here

Safety clearances
Comply with the safety clearances for the appliance.

Flush installation
Note: Depending on the cooking method, residual moisture may escape from the appliance even after use. We, therefore, recommend treating the recess in the ceiling with a paint that prevents mould formation.

Secure installation
Follow these safety instructions when installing the appliance.

WARNING ‒ Risk of suffocation!
Children may put packaging material over their heads or wrap themselves up in it and suffocate.

Keep packaging material away from children.
Do not let children play with packaging material.

WARNING ‒ Risk of fire!
The grease deposits in the grease filter may catch fire.

Never work with naked flames close to theappliance (e.g. flambéing).
Do not install the appliance near a heat-producing appliance for solid fuel (e.g.wood or coal) unless a closed, non-remov-able cover is present. There must be no flying sparks.
The specified safety clearances must be complied with in order to prevent a build-up of heat.
Observe the specifications for your cooking appliances. If the installation instructions for the cooking appliances specify a different clearance, the larger of the two must always be provided for. If gas hobs and electric hobs are operated together, the largest specified clearance applies.

WARNING ‒ Risk of injury!
Components inside the appliance may have sharp edges.

Wear protective gloves.
The appliance may fall down if it has not been properly fastened in place.
All fastening components must be fixed firmly and securely in place.
The appliance is heavy.
To move the appliance, two people are required.
Use only suitable tools and equipment.
The appliance is heavy.
The appliance must not be fitted directly onto plasterboard or similar lightweight materials.
To ensure correct installation, you must usea material that is sufficiently stable and suitable for both the structural conditions and the weight of the appliance.

Changes to the electrical or mechanical assembly are dangerous and may lead to malfunctions.

Do not make any changes to the electrical or mechanical assembly.
If appliances supported by cables oscillate,this may overload the fastening elements. Theappliance may fall down.
Do not do anything that makes the appli-ance oscillate.
Oscillating movement of the appliance may result in injury.
Do not do anything that makes the appli-ance oscillate.
When moving the appliance up and down,leave sufficient distance to the appliance.
Damaged cables may crack.
In the case of damaged cables or unusual noises during the upward or downward movement, the appliance must no longer be used.
ATTENTION!
Damaged cord or spring fracture in the cord’s-unwinding unit.
The appliance must no longer be used.WARNING ‒ Risk of burns!
Objects left on the hob may tip over when the filter cover is opened. This may cause burns.
Clear the hob before opening the filter cover.WARNING ‒ Risk of injury!
The filter cover may swing out.
Open the filter cover slowly.
Take hold of the filter cover after opening until it no longer swings out.
Close the filter cover slowly.
Risk of injury when opening and closing the hinges.
Keep your hands away from the hinges.

WARNING ‒ Risk of electric shock!
Sharp-edged components inside the appli-ance may damage the connecting cable.

Do not kink or trap the connecting cable.
If the appliance or the power cord is damaged, this is dangerous.
Never operate a damaged appliance.
Never pull on the power cord to unplug theappliance. Always unplug the appliance at the mains.
If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box.
Call customer services. → Page 13
Improper repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist staff.
Only use genuine spare parts when repairing the appliance.
If the power cord of this appliance is damaged, it must be replaced by trained specialist staff.
Incorrect installation is dangerous.
Connect and operate the appliance only in accordance with the specifications on the rating plate.
Connect the appliance to a power supply with alternating current only via a properly installed socket with earthing.
The protective conductor system of the domestic electrical installation must be properly installed.
Never equip the appliance with an external switching device, e.g. a timer or remote control.
When the appliance is installed, the mains plug of the power cord must be freely accessible. If free access is not possible, an all-pole isolating switch must be installed in the permanent electrical installation according to the conditions of Overvoltage Category III and according to the installationregulations.
When installing the appliance, check that the power cable is not trapped or damaged.

ATTENTION!
There is a risk of damage to the appliance if the cable is coiled up.

Always secure the cable firmly using the strain relief so that it does not coil up fully in the appliance.

General information
Follow these general instructions during the installation.

For the installation, observe the currently valid building regulations and the regulations of the local electricity and gas suppliers.
When discharging the exhaust air, the official and legal regulations, such as the regional building code., must be observed.
In order to freely access the appliance for servicing,select an easy-to-reach installation site.
The surfaces of the appliance are sensitive. Avoid damaging them during installation.

Instructions for the Electrical Connection
In order to safely connect the appliance to the electrical system, follow these instructions.WARNING ‒ Risk of electric shock!
It must always be possible to disconnect the appliance from the electricity supply. The appliance must only be connected to a protective contact socket that has been incorrectly installed.

The mains plug for the mains power cable must be easily accessible after the appliance is installed.
If this is not possible, an all-pole isolating switchmust be integrated into the permanent electrical installation according to the conditions of overvoltage category III and according to the installation regulations.
The permanent electrical installation must only be wired by a professional electrician. We recommendinstalling a residual-current circuit breaker (RCCB)in the appliance’s power supply circuit.
Sharp-edged components inside the appliance may damage the connecting cable.
Do not kink or trap the connecting cable.
- The connection data can be found on the rating plate. → Page 14
- The connecting cable is approx. 1.30 m long.
- This appliance complies with the EC interference suppression regulations.
- The appliance corresponds to protection class 1.You should therefore only use the appliance with a protective earth connection.
- Do not connect the appliance to the power supply during installation.
- Ensure that the protection against contact is guaranteed during installation.
- Only a licensed professional may connect appliances without plugs. They are subject to the requirements of the local electricity provider.
  16.7 Information on the installation situation
- Install this appliance on the kitchen ceiling or astable suspended ceiling.
- To install additional special accessory parts, ob-serve the enclosed installation instructions.
- Recommended ceiling height up to 3.50 m.
- The appliance finds it more difficult to draw in thecooking vapours the further away they are from thehotplate. For optimum performance, a maximum dis-tance of 1500 mm is recommended.
- The width of the extractor hood must correspond atleast with the width of the hob.
- To optimally detect the cooking vapours, install theappliance in the middle of the hob.
- When securing cables, ensure that the maximumdistance between the frame cover and the top edgeof the appliance is 1.20 m.

Installation
Checking the ceiling

Check whether the ceiling is horizontal and ad-equately load-bearing.
The maximum weight of the appliance is 80 kg.
Do not fit the appliance directly onto plasterboard (or similar lightweight materials) in a suspended ceiling.
Drill the hole depth in accordance with the length of the screws.
Use the enclosed screws are suitable only for concrete ceilings.
Install the appliance with a fixing material which is sufficiently stable and has been adjusted accordingly for both the structural conditions and the weight of the appliance.
Check the cut-out area for existing cables of other appliances.

Preparing the ceiling

Cover the hob to prevent damage.
Determine the position of the frame and thereby the middle based on the position of the hob.
Ensure that there are no electrical wires, gas pipes or water pipes in the area where holes are to be drilled.
Drill four holes with a diameter of 6 mm for the fixing.
Drill the hole depth in accordance with the length of the screws.

Fitting the frame

Screw the two opposite screws into the ceiling until they protrude out of the ceiling by approx. 7 mm.
Note the correct position of the screws and the frame.
Guide the frame through the screws on the ceiling.
Move the frame so that the screws lock into place in the key hole openings and can be screwed in tightly.
Align the frame and use two screws to secure it in place.
Place a scissor lift table or another suitable device under the appliance.
Do not place the scissor lift table on the hob.
Position the appliance on the scissor lift table so that the appliance is on the frame.
Do not place the appliance on the grease filters as these could be damaged.
Leave a gap of at least 700 mm between the hob and the lower edge of the appliance.
When securing cables, ensure that the maximum distance between the frame cover and the top edge of the appliance is 1.20 m.

Connecting the appliance

Pull the protective tube over the on-site cable.
Shorten the protective tube if necessary.
Insert the on-site cable into the terminal plug.
Thread the 4 cables into the lock nuts.
To avoid damaging the appliance’s limit switch, do not insert the lock nuts into the openings.
To protect against scratches, position a spacer on the appliance and place the frame cover on top of it.
Thread the cables through the openings of the frame cover.
ATTENTION!
There is a risk of damage to the appliance if the cable is coiled up.
- Always secure the cable firmly using the strain relief so that it does not coil up fully in the appliance.
  Thread the cable on the appliance through the opening in the frame cover and use the strain relief supplied to secure it.
Undo the strain relief on the cable on the appliance and pull out the cable.
Remove the strain relief fitted at the factory. Put the strain relief to one side.
Thread the four cables into the cable tensioner and apply equal tension.
Do not shorten the cables.
Readjust the cables. To do this, relieve the load on the appliance, loosen the cable tensioner and push the cables up.
Thread the four enclosed cable clamps and secure in place approx. 20 mm in front of the cable tensioner.
Tighten the screws by hand.
Align the appliance using a spirit level.
Remove the protective film from the appliance.
Carefully remove the protective film around the cables so that the appliance’s limit switch is not damaged.
Place the scissor lift table or another suitable device under the appliance.
- The appliance hangs on the cables from the ceiling.
Pull the cable on the appliance out completely.
ATTENTION!
There is a risk of damage to the appliance if the cable is coiled up.
- Always secure the cable firmly using the strain relief so that it does not coil up fully in the appliance.
  Insert the cable on the appliance into the terminal plug and place it in the strain relief.
Close the cable cover.
Carefully lift the frame cover.
Place the ends of the cable behind the frame cover.
Securely tighten the frame cover with the lock nuts.
Do not use a tool to avoid damaging the frame cover.
Remove the spacer from the appliance.
Connect a power supply.
To start the reference movement, press the ⁠ button on the remote control.
The reference movement determines the correct actual position with a reference switch.
- The appliance moves up.
If the appliance has moved up as far as it will go, press the ⁠ button on the remote control.
- The appliance moves down.
- The reference movement ends when the appliance has moved down as far as it will go.

Fitting the filter cover

WARNING ‒ Risk of injury!
Components inside the appliance may have sharp edges.

Wear protective gloves.

Risk of injury when opening and closing the hinges.

Keep your hands away from the hinges.
1. Adjust the appliance height on the remote control using the button and the button.
  If you have not carried out a reference movement, the appliance automatically moves up and down as far as it will go.
2. Open the hinges on the filter cover.
3. Tighten the fastening screws on the hinges.
4. Connect the cable on the appliance for the lighting.
5. Close the cover on the cable duct.
6. Remove the grease filters.
  To avoid causing damage, do not bend the grease filters.
7. Open the odour filter cartridge.
8. Unpack the odour filter.
9. Insert the odour filter.
  Insert the odour filter in the correct direction.
10. Fit the grease filters.
  To avoid causing damage, do not bend the grease filters.
11. Swing the filter cover up and ensure that it engages.
  Removing the appliance

WARNING ‒ Risk of injury!
Components inside the appliance may have sharp edges.

Wear protective gloves.
1. Cover the hob to prevent damage.
2. Press the ⁠ button on the remote control.
  The appliance moves down as far as it will go.
3. Place a scissor lift table or another suitable device under the appliance.
  Do not place the scissor lift table on the hob.
4. Move the scissor lift table up until the tension on the appliance cables is removed.
  Notes
- Position the appliance on the scissor lift table so that the appliance is on the frame.
- In order not to damage the grease filters, do not set the appliance down on the grease filters.
1. Disconnect the appliance from the power supply.
2. To protect against scratches, place the spacer on the appliance.
3. Carefully loosen the screws on the frame cover.
  Do not use any tools.
  Note: In order to prevent damage to the limit switch,ensure that lock nuts do not fall into the opening in the appliance.
4. Place the frame cover down carefully.
5. Open the cable cover at the side using a screwdriver.
6. Remove the cable on the appliance from the terminal plug and the strain relief.
7. ATTENTION!
  There is a risk of damage to the appliance if the cable is coiled up.
8. Always secure the cable firmly using the strain relief so that it does not coil up fully in the appliance.
  Secure the cable on the appliance using the strain relief so that it does not coil up.
9. Remove the on-site cable from the terminal plug and remove the protective tube.
10. Loosen the four cable clamps.
11. Open the cable tensioner and pull out the cables.
12. Thread the cables out of the frame cover.
13. ATTENTION!
  There is a risk of damage to the appliance if the cable is coiled up.
- Always secure the cable firmly using the strain relief so that it does not coil up fully in the appliance.
  Thread the cable on the appliance through the opening in the frame cover and use the strain relief to secure it.
1. Remove the diagonally opposite screws on the frame.
2. Loosen the two other diagonally opposite screws.
3. Move the frame and remove it.
  Note: If you reinstall the appliance, you will need to reset the appliance to the factory settings → Page 8.

ENManufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG
Valid within Great Britain:
Imported to Great Britain by BSH Home Appliances Ltd.
Grand Union House
Old Wolverton Road
Wolverton, Milton Keynes
MK12 5PT
United Kingdom
BSH Hausgeräte GmbH
Carl-Wery-Straße 34
81739 München, GERMANY
siemens-home.bsh-group.com