GENERAL LIFE FH105S Underfloor Heating Thermostat User Manual

UNDERFLOOR HEATING THERMOSTAT
FH105S
USER MANUAL
generallife.com.tr

FH105S USER MANUAL

GENERAL SPECIFICATIONS

FH105S is a floor heating room thermostat. User provides more comfortable and affordable heating by setting needed room temperature.

• Sensitive Temperature Measurement
• Wired Connection
• ON / OFF Control

FH105S AND EQUIPMENTS

TECHNICAL DATA

Resistive load)
Temperature Measurement Accuracy| 0.1°C
Operating Sensitivity| 0.5°C
Operating Temperature Range| (5°C) — (30°C)
Operating Temperature| (-10°C) — (+50°C)
Storage Temperature| (-20°C) — (+60°C)

ROOM THERMOSTAT

Room Thermostat Indicator LED Descriptions

ROOM THERMOSTAT PLACEMENT
Place your Room Thermostat in a room you use frequently in your living space. For example; like the hall or living room of your home.
Avoid installing the Room Thermostat in places where there is a lot of air circulation, such as at the doorway or by the window. Also, do not place it close to heating units (heater core, fireplace, etc.) and in direct sunlight. We recommend that the room thermostat is placed at a height of 150 cm from the floor.

ROOM THERMOSTAT WORKING PRINCIPLE

As soon as you energize your Room Thermostat, it will start working.
Your Room Thermostat measures the temperature of the environment it is in every 5 seconds. If the ambient temperature rises 0.5 degrees above the temperature you set, your Room Thermostat turns off the heating unit, and if it falls below 0.5 degrees, it turns on the heating unit.
If the floor sensor measures temperature above 28°C, it turns off the heating unit. The floor sensor operating sensitivity is ±1°C. Thus, it is ensured that the ambient temperature remains within a certain range.
External floor sensor is only active when it is connected.
Note: If a floor sensor is installed with Room Thermostat, only GENERAL Life floor sensor should be installed. Otherwise, the product will be out of warranty.

ROOM THERMOSTAT WIRING DIAGRAM

6.  WARNING!
The assembly of product should be done according to the image above.
For electrical connection, please see diagram 5. Should not be used in case the usage of a wiring center.

WIRING DIAGRAM FOR ACTUATOR

WIRING DIAGRAM FOR WIRING CENTER WARNING!
Operations related to the control panel, heating unit or electrical installation must be carried out by persons with professional qualifications.

DECLARATION OF CONFORMITY

ISIPARK İÇ VE DIŞ TİC. İNŞ. ISITMA SİSTEMLERİ OTO. SAN.A.Ş.which Head Office and production site is located on Fatih Mah. 1188 Sk.No:13/A Sarnıç – Gaziemir – İZMİR – TÜRKİYE confirms and declares that the product marked with CE and its specifications below is covered by the provisions of the mentioned directive.
Brand : GENERAL Life
Product Name : THERMA 300S SMART
Product Type : Smart Room Thermostat
The product manufactured by ISIPARK and mentioned above is connected wirelessly at 2.4
Ghz internet and periodically shares the temperature and status information with the server on the internet.
Compatible Directives:
Radio and Telecommunications Terminal Equipment Regulation
2014/53/EU (ETSI EN 301 489-1 V2.2.3 (2019-11),
ETSI EN 301 489-17 V3.2.4 (2020-09), EN 300 220-1 V3.1.1,
EN 300 220-2 V3.2.1 (2018-06), EN 62479: 2010, EN 62368-1:2014+A11:2017)
Electromagnetic Compatibility Regulation 2014/30/EU
(ETSI EN 301 489-1 V2.2.3, ETSI EN 301 489-3 V2.1.1)
Low Voltage Directive 2014/35/EU (EN 60730-2-9)
Supplementary Information: Mentioned product can be used with combi boilers with on / off output and compatibility with the directive only covers the product. ISIPARK is not responsible for the compliance of the entire system with the directive. This declaration does not apply when changes are made to the product without obtaining our consent.![GENERAL LIFE 300S Smart Thermostat

• icon 24](https://manuals.plus/wp-content/uploads/2024/06/GENERAL-LIFE-300S- Smart-Thermostat-icon-24.png)

WARRANTY CONDITIONS

1. The warranty period starts from the invoice date and warranted against manufacturing defects for 2 years.

2. Devices and apparatus are delivered to the customer in working condition in our company. On-site commissioning is subject to a service fee.

3. The repair of the devices and apparatus covered by the warranty is carried out in our company factory and should send by contracted transportation company. In on-site services, the transportation and accommodation expenses of the service personnel  belong to the customer. The shift fee during transportation is added to the service fee and collected in advance.

4. The maintenance of devices and apparatus is done in our company. For the maintenance of the devices and apparatus, the round travel fares belongs to the customer.

5. In case of malfunctioning of the devices and apparatus whose warranty period continues, it is tested in our company whether the malfunction is caused by a customer or manufacturer fault, and it is reported with a report issued by our company.

6. In case of detection of manufacturer-induced errors of devices and apparatus whose warranty period continues, the customer can request a replacement or repair of the devices and apparatus at full expense by the manufacturer, unless it’s higher than the product’s price

7. In the event that the faults of the devices and apparatus whose warranty period continues are determined as caused by the customer, all expenses would be belong to the customer.

8. Customers should be aware of damages (if there is any) of product and warn manufacturer since the day warranty duration starts.If customer do not warn manufacturer with knowledge of damage, customer lose the rights of article 6.

9. Malfunctions resulting from the use of devices and apparatus contrary to the matters stated in the User Manual are not covered by the warranty.

10. Devices and their apparatus are out of warranty if they are beaten, broken or scratched by the customer.

11. Damages resulting from the use of devices and apparatus belonging to other brands and models without the approval of the manufacturer are not covered by the warranty.

12. Battery leakage and errors due to rust, oxidation and liquid contact by working in acidic /humid environments are not covered by the warranty.

13. When the product is not used for a long period (more than 15 days), remove the batteries. Otherwise, malfunctions that will occur are out of warranty.

14. Damages that may occur during the transportation of devices and apparatus are not covered by the warranty. Customers can take a transportation insurance.

15. Damages caused by mains voltage / faulty electrical installation are not covered by the warranty.

16. Devices and apparatuses are out of warranty for malfunctions caused by force majeure such as fire, flood, earthquake etc.

17. All of the devices and apparatuses, including all their parts, are under the warranty of our company.

18. In case of malfunction of the devices and apparatuses within the warranty period, the time spent during repairment period is added to the warranty period. The repair period of the product cannot exceed 20 working days. This period starts from the date of notification to the service station of the malfunction related to the product or, in the absence of a service station, to the seller, dealer, agency, representative, importer or manufacturer of the product. Consumer can report the problem by; phone, fax, e-mail,  registered and reply paid letter or a similar way. However, in case of a conflict, responsibility of prove is belong to the customer. If the malfunction of the product is not repaired within 20 working days, the manufacturerproducer or importer; has to allocate
    another product with similar features to the use of the consumer until the repair of the product is completed,

19. Although the consumer uses his/her repair rights,
    -If the product breaks down for 4 times in a year or 6 times in warranty duration and these problems effects main purpose of the product. (starting from delivery time during warranty.)
    – Exceeding the maximum time required for repair,
    – In the event that the service station is not available, if it is determined that the repair of the defect is not possible with the report prepared (in order) by one of the seller, dealer, agency, representative, importer or manufacturer, a refund or a price discount at the rate of defect can be requested.

20. The customer can make complaints and appeals to consumer courts or consumer arbitration committees.

21. The warranty document must be kept by the customer during the warranty period. If the document is lost, a second document will not be issued. In case of loss, repair and replacement of devices and apparatus will be made for a fee.

WARRANTY CERTIFICATE

Manufacturer
Title: ISIPARK İÇ DIŞ TİC. A.Ş.
Adsress: Fatih Mah. 1188 Sk. No:13/A Sarnıç
Gaziemir İzmir-TÜRKİYE
Tel: +90 (232) 457 99 50
Fax: +90 (232) 457 91 22
E-Mail: generallife@generallife.com.tr
Authorised Signatory:……………………………………….
Company Stamp: ……………………………………….
Product
Type: Smart Room Thermostat
Brand: GENERAL Life
Model: THERMA 300S SMART
Guarantee Period: 2 Years
Max. Time to Repair: 20 Days
Banderole and Serial Number:
Vendor
Title:………………………………………..
Address:……………………………………….
Tel:……………………………………….
Fax:……………………………………….
E-Mail:……………………………………….
Invoice Date and Number:……………………………………….
Delivery Time and Place:……………………………………….
Authorised Signatory:……………………………………….
Company Stamp:……………………………………….
Product
Type: Smart Room Thermostat
Brand: GENERAL Life
Model: THERMA 300S SMART
STAMP……………………………………….

Isıpark reserves the rights of changing product specifications and user manuals.
*For all changes,you may visit generallife.com.tr

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>