HUAWEI SmartBand 4 User Guide

: June 6, 2024
: Huawei

Table of Contents

Powering on the band
Downloading Huawei Health
Bluetooth calling
Removing and replacing the ear tip
Getting help
Operation and safety
Disposal and recycling information
Accessories and Software Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Quick Start Guide

Powering on the band

Press the release buttons on the sides to detach the headset unit. Remove the headset unit from the strap. Connect the charger to the charging port on the headset unit. The headset unit will automatically power on. You can also press and hold the side button to power on your band.

HUAWEI SmartBand 4- |

Wipe the charging port dry before charging.
Use the dedicated charging cable that comes with your band to charge it.

---|---

Downloading Huawei Health

To download and install the Huawei Health app, scan the QR code on the right, or search for Huawei Health in AppGallery or
other app stores.
Pairing your device with your phone

https://appgallery.cloud.huawei.com/app/C10414141

From the device list in the Huawei Health app, select the device and follow the onscreen instructions to complete the pairing.

Bluetooth calling

Your Band will vibrate to notify you when there is an incoming call. Remove the headset to automatically answer a call.
You can use your phone to call a contact and use the headset to start the conversation. You can also make a call quickly through your Band call records.
More
You can view basic fitness/sleep data on the screen of your Band, or view more detailed information in the Huawei Health app.
Your band supports TruSleep to monitor your sleep more accurately. You can enable this feature in the app.
You can wear your Band when you are washing your hands or in the rain. Wipe your Band’s dries immediately if it gets wet to avoid water from getting inside the microphone.

Do not use your Band when washing a car, swimming, diving, scuba diving, or showering.
You can adjust or remove your strap.

Removing and replacing the ear tip

When putting the tip over the earphone, adjust the tip so it lines up with the lock and unlock lines. Make sure that the tip
is securely fitted over the earphone when finished.

HUAWEI SmartBand 4-Remove

Rotate the ear tip counterclockwise.
Align the earpiece with the unlock line.
Gently pull up.

HUAWEI SmartBand 4-Replace

Line the ear tip up with the unlock line.
Rotate the ear tip clockwise.
Align it with the lock line.

Getting help

View the online help in the Huawei Health app for more information about connection and functions, as well as useful tips.
Copyright © Huawei 2020. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSES ONLY AND DOES NOT CONSTITUTE ANY KIND OF WARRANTIES.
Trademarks and Permissions
The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc., and any use of this mark by Huawei Technologies Co., Ltd. is under license. Huawei Device Co., Ltd. is an affiliate of Huawei Technologies Co., Ltd.
Other trademarks, products, services,s and company names mentioned may be the property of their respective owners.
Privacy Policy
To better understand how we protect your personal information, please see the privacy policy at http://consumer.huawei.com/privacy-policy, or read
the privacy policy and service terms using the app after pairing it with your phone.
Blasting Caps and Areas
Turn off your mobile phone or wireless device when in a blasting area or in areas posted turn off “two-way radios” or “electronic
devices” to avoid interfering with blasting operations.
Areas with flammables and explosives
Do not use the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire. In addition, follow the instructions indicated in text or symbols. Do not store or transport the device in containers with flammable liquids, gases, or explosives.

Operation and safety

Using an unapproved or incompatible power adapter, charger or battery may cause fire, explosion, or other hazards.
Ideal temperatures are -10°C to +45°C.
Some wireless devices may affect the performance of hearing aids or pacemakers. Consult your service provider for more
information.
Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to
prevent potential interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket.
Keep the device and the battery away from excessive heat and direct sunlight. Do not place them on or in heating devices, such as microwave ovens, stoves, or radiators. Do not disassemble, modify, throw, or squeeze them. Do not insert foreign objects into them, submerge them in liquids, or expose them to external force or pressure, as this may cause them to leak, overheat, catch fire, or even explode.
Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving.
To prevent damage to your device’s parts or internal circuits, do not use it in dusty, smoky, damp, or dirty environments or near magnetic fields.
Do not use, store or transport the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire.
Dispose of this device, the battery, and accessories according to local regulations. They should not be disposed of in the normal household waste. Improper battery use may lead to fire, explosion, or other hazards
The device has undergone testing and has demonstrated water and dust resistance in certain environments.
The device has a built-in, non-removable battery, do not attempt to remove the battery, otherwise, the device may be damaged.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
Using a headset at high volumes may damage your hearing. To reduce this risk, lower the headset volume to a safe and comfortable level.
Exposure to high volumes while driving may cause distraction and increase your risk of an accident.
If the battery leaks, ensure that the electrolyte does not make direct contact with your skin or eyes. If the electrolyte touches your skin or splashes into your eyes, immediately flush with clean water and consult a doctor
When charging the device, make sure the power adapter is plugged into a socket near the device and is easily accessible.• Unplug the charger from electrical outlets and the device when not in use.
Adult supervision is advised if children are to use or come into contact with this product.
Please consult your doctor and the device manufacturer to determine if the operation of your device may interfere with the operation of your medical device.
Switch off your wireless device when requested to do so in hospitals, clinics, or health care facilities. These requests are designed to prevent possible interference with sensitive medical equipment.
Switch off your wireless device whenever you are instructed to do so by airport or airline staff. Consult the airline staff about the use of wireless devices on board the aircraft, if your device offers a ‘flight mode’ this must be enabled prior to boarding an aircraft.
Ensure that the power adapter meets the requirements of Clause 2.5 in IEC60950-1/EN60950-1/UL60950-1 and has been tested and approved according to national or local standards.
Protect the wearable and its accessories from strong impact, strong vibration, scratches, and sharp objects, these may damage the device.
Make sure that the wearable and its accessories stay clean and dry. Do not wear the wearable too loosely or tightly during workouts. Clean your wrist and device after the workout. Rinse and dry the device to clean it before putting it back on.
If the wearable is built for swimming and showering, make sure to regularly clean the strap, dry your wrist and the device before wearing it again.
Loosen the strap for a little bit during the day to let your skin breathe. If wearing it starts to feel uncomfortable, take off your wearable and let your wrist have a rest. If it still feels uncomfortable, stop wearing it and seek medical advice as soon as possible. You can also purchase straps made from other materials and with different designs from the official Huawei website.
Use the radio equipment in good reception conditions to reduce the amount of radiation received.
Keep radio equipment away from the belly of pregnant women.
Keep radio equipment away from the lower abdomen of teenagers.
Respect of the restrictions of use specific to certain places (hospitals, planes, service stations, schools …).

Disposal and recycling information

The crossed-out wheeled bin symbol on your product, battery, literature, or packaging reminds you that all electronic products and
batteries must be taken to separate waste collection points at the end of their working lives; they must not be disposed of in the
normal waste stream with household garbage. It is the responsibility of the user to dispose of the equipment using a designated
collection point or service for separate recycling of waste electrical and electronic equipment ( WEEE ) and batteries according to
local laws.
Proper collection and recycling of your equipment help ensure electrical and electronic equipment ( EEE ) waste is recycled in a manner that conserves valuable materials and protects human health and the environment, improper handling, accidental breakage,

damage, and/or improper recycling at the end of its life may be harmful to health and environment. For more information about where and how to drop off your EEE waste, please contact your local authorities, retailer, or household waste disposal service or visit the website http://consumer.huawei.com/en/.
Reduction of hazardous substances
This device and any electrical accessories are compliant with local applicable rules on the restriction of the use of certain hazardous substances in electrical and electronic equipment, such as EU REACH, RoHS, and Batteries (where included) regulations, etc. For declarations of conformity about REACH and RoHS, please visit our website http://consumer.huawei.com/certification.
EU regulatory conformance
RF exposure requirements
Your device is a low-power radio transmitter and receiver. As recommended by international guidelines, the device is designed not to exceed the limits established by the European Commission for exposure to radio waves.
Highest reported SAR value: SAR at the head (Limit of 2.0 W / kg): 0.02 W / kg; SAR to members (Limit of 4.0 W / kg): 0.02 W / kg.
Statement
Hereby, Huawei Device Co., Ltd. declares that this device FDS-B19 is in compliance with the essential requirements and other relevant

provisions of Directive 2014/53/EU.
The most recent and valid version of the DoC (Declaration of Conformity) can be viewed at
http://consumer.huawei.com/certification.
This device may be operated in all member states of the EU. Observe national and local regulations where the device is used.
This device may be restricted for use, depending on the local network.
Frequency bands and power
(a) Frequency bands in which the radio equipment operates: Some bands may not be available in all countries or all areas. Please contact the local carrier for more details.
(b) Maximum radio-frequency power transmitted in the frequency bands in which the radio equipment operates: The maximum power for all bands is less than the highest limit value specified in the related Harmonized Standard.
The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to these radio equipment areas
follows: FDS-B19: Bluetooth: 20 dBm

Accessories and Software Information

It is recommended that the following accessories should be used:

Charging cable Spare earcaps
The product software version is 1.1.0.24C00SP1C
Software updates will be released by the manufacturer to fix bugs or enhance functions after the product has been released. All
software versions released by the manufacturer have been verified and are still compliant with the related rules.
All RF parameters (for example, frequency range and output power) are not accessible to the user, and cannot be changed by the user.
For the most recent information about accessories and software, please see the DoC (Declaration of Conformity) at
http://consumer.huawei.com/certification.
Please go to Settings > About > Regulatory Information on the device to view the E-label screen.
Please visit http://consumer.huawei.com/en/support/hotline for the recently updated hotline and email address in your country or region.
Caution: Any changes or modifications to this device not expressly approved by Huawei Device Co., Ltd. for compliance could void the
user’s authority to operate the equipment.
Leather straps are not water-resistant.
This product is not designed to be a medical device and is not intended to diagnose, treat, cure or prevent any disease. All data and measurements should be used for personal reference only. If you experience skin discomfort when wearing the device, take it off and consult a doctor.