MARLEY Rebel EM-JE121 User Guide

: June 6, 2024
: MARLEY

Table of Contents

What is in the Box
Initial Set Up
Battery Life
Powering On and Pairing
Force pair to New Device
Reset Earbuds to Factory Settings
MONO MODE
ISOLATING EAR TIPS
COMPLIANCE INFO
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MARLEY Rebel EM-JE121 User Guide

What is in the Box

Box Items

Initial Set Up

Open Case.
Remove earbuds and remove paper film from the bottom.
Place Earbuds in Case.
Leave earbuds in closed case for 15 minutes before first pair.
Open lid and remove earbuds to pair.

Battery Life

Tap case to check battery level. LEDs on case will indicate status.

Powering On and Pairing

Remove earbuds from the charging case and they will automatically go into pairing mode. Select “Rebel” from your device’s Bluetooth® menu.

Force pair to New Device

Open case lid, press and hold case button for 4 seconds.

Reset Earbuds to Factory Settings

Open lid while earbuds are in case, press and hold case button for 8 seconds.
Earbuds will quickly flash red indicating factory reset. Close lid. To pair to device follow step 1.

MONO MODE

ISOLATING EAR TIPS

Choose your preference from any of the 3 ear tips provided and adjust the EQ accordingly by pressing either earbud 3 times.

COMPLIANCE INFO

READ ALL INSTRUCTIONS BEFORE USE AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC RF EXPOSURE STATEMENT:
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.

CAUTION!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

ISEDC STATEMENT: This device complies with Innovation, Science, and Economic Development Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003.

ISEDC RF EXPOSURE STATEMENT:
The device is compliant with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance.

End user must follow the specific operating instructions for satisfying RF exposure compliance.

The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA).

These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body.

BATTERY REPLACEMENT STATEMENT IN EUROPE
Your Rebel includes a rechargeable battery designed to last the lifetime of the product. In the unlikely event that you should require a replacement battery, please contact Consumer Relations who will supply details of the warranty and out-of-warranty replacement battery service.

CAUTION

Risk of explosion if the battery is replaced by an incorrect type

replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types);
disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

BATTERY DIRECTIVE
This symbol indicates that batteries must not be disposed of in the domestic waste as they contain substances which can be damaging to the environment and health. Please dispose of batteries in designated collection points.

WEEE EXPLANATION
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.

Hereby, FKA Brands Ltd, declares that this radio equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. A copy of the Declaration of Conformity can be obtained from www.thehouseofmarley.co.uk/declaration-of- conformity

To prevent possible hearing damage, do not listen at high volume levels for long periods. Full instruction and warranty details can be found at http://www.thehouseofmarley.com/instructionbooks.

Operating frequency band: 2402 – 2480MHz
CE BT Max Power Transmitted Power:
Left Ear:11dBm, Right Ear:11dBm

Distributed by
House of Marley, LLC,
3000 N. Pontiac Trail, Commerce Township, MI 48390.

Imported into the UK by
FKA Brands Ltd, Tonbridge, TN110GP, UK.

Imported into the EU by
FKA Brands Ltd, 29 Earlsfort Terrace, Dublin 2. IE

QS-EMJE121

Right Earbud EM-JE121R
FCC ID: PVB-EMJE121R
IC:10613A-EMJE121R

Left Earbud EM-JE121L
FCC ID: PVB-EMJE121L
IC: 10613A-EMJE121L

Charging Case EM-JE121
FCC ID: PVB-EMJE121
IC: 10613A-EMJE121

Icons