MARLEY 346GTDUO Duo Speakers Instruction Manual

MARLEY 346GTDUO Duo Speakers

BEFORE USE

1. Choose unit installation location carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibrations and excessive dust, cold or moisture. Keep away from sources that hum, such as transformers or motors.
2. Do not open the cabinet as this may result in damage to the circuitry or electrical shock. If a foreign object should get into the set, contact Customer Service.
3. When removing the power plug from the wall outlet, always pull directly on the plug, never pull the cord.
4. Do not attempt to clean the unit with chemical solvents as this might damage the finish. Use a clean, dry cloth.
5. In order to shut off the power to this product completely, unplug the power cord from the wall outlet. Be sure to unplug the unit if you do not intend to use it for an extended period of time, such as a vacation.
6. Keep this manual in a safe place for future reference.

IN THE BOX

1. Left mains-powered speaker
2. Right battery-powered speaker
3. USB to USB-C cable
4. RCA cable
5. Power adaptor & plugs
6. USB adaptor & plugs

UNDERSTANDING THE LEDS

LEFT SPEAKER

CONNECTIVITY STATUS

• Bluetooth Searching
• Bluetooth Connected
• AUX in Mode
• RCA line in Mode

POWER STATUS

• Power Off
• Power On

RIGHT SPEAKER

CONNECTIVITY STATUS

• Bluetooth Searching
• Bluetooth Connected
• AUX in Mode
• RCA line in Mode

POWER STATUS

• Power Off
• Power On
• Low Battery

CONTROLS

SETUP

1. Take all the components out of the package and then place the product on a stable surface.
2. Attach the current plug adapter to both the mains power cable and the USB C charger.
3. Charge the right USB C powered speaker until the battery is powered. (this has a 20- hour battery so does not need to be plugged in to use)
4. Attach the power cable to the left speaker. This always needs to be plugged in and powered on to be used.

CONNECTING TO A MOBILE DEVICE VIA BLUETOOTH:

1. Follow the setup instructions
2. Turn the left and right speakers on, their left LED’s will be flashing Blue. They will now try and pair together, if 30 seconds pass and you do not hear them connect (they will say “left channel, right channel”. When paired together). Then hold the Bluetooth button on the Left mains powered speaker, until it beeps. The LED will now flash red/blue. This will manually make it find the right speaker. They should now pair.
3. Open up the Bluetooth setting on your mobile device, and turn your Bluetooth on
4. Then in available devices look for “Get Together Duo x 2”
5. Select this and you should then be paired.
6. You can now play audio via your mobile device and the speakers will play.

CONNECTING TO A BLUETOOTH TURNTABLE
(STIR IT UP WIRELESS – EM-JT002)

1. Follow the setup instructions in this manual.
2. Ensure the Turntable is setup as per the turntable setup instructions
3. Turn the left and right speakers on, their left LED’s will be flashing Blue. They will now try and pair together, if 30 seconds pass and you do not hear them connect (they will say “left channel, right channel”. When paired together). Then hold the Bluetooth button on the Left mains powered speaker, until it beeps. The LED will now flash red/blue. This will manually make it find the right speaker. They should now pair.
4. Now turn the turntable on and press the Bluetooth connect button on the turntable. TIP: if using the Stir It Up Wireless, wait 20 seconds – if it does not connect, press the Bluetooth button again on the turntable to re-initiate the pair process. When the turntable LED turns solid blue you are paired.
5. Now put on a vinyl and start streaming your music.

CONNECTING TO A TURNTABLE VIA RCA LINE IN
(STIR IT UP – EM-JT000)

1. Follow the setup instructions in this manual.
2. Ensure the Turntable is setup as per the turntable setup instructions Connect the RCA to RCA cable (provided) into the back of the turntable.
3. Then put the red RCA cable into the right Get Together Duo speaker, and the white RCA cable into the left speaker.
4. Now turn the left speaker on, then press the power button twice until the left LED is purple.
5. Now turn on the right speaker and press the power button twice until the right LED is purple.
6. You are now in the RCA in mode. Now play a vinyl on your turntable and it will be played by the Get Together Duo’s.

PLAYING VIA AUX IN (MONO)

1. Put the AUX cable into the speaker and the device you want to play the audio from.
2. Turn on the speaker.
3. Press the power button once, until the left LED is red. This is now in AUX mode and will play via AUX.
   Note: this will currently play in mono mode. If you want to play AUX in true wireless stereo follow “Advanced RCA Line In/AUX Setup”

ADVANCED RCA LINE IN/AUX SETUP

1. Follow the setup instructions in this manual.

2. Connect the both RCA connectors/or AUX to the left speaker (master)

3. Then turn on the left speaker and select the mode you want. 1 press on the power button = AUX (red LED), 2 press in the power button = RCA line in (purple LED)

4. Now turn on the right speaker, and ensure it is in Bluetooth mode (the left LED must be blue). The LED should be flashing meaning it is looking for the left speaker. If it does not pair in 30 seconds, hold the Bluetooth button on the left main powered speaker until it beeps. It will now search for the right speaker.
   Note: if you turn the right speaker on and the LED is solid blue, this means it is already connected to a device. To disconnect this, press the Bluetooth and – button at the same time. The left LED will now flash blue. Now hold the Bluetooth button on the left speaker to sync the 2.

5. You will now be playing via RCA/AUX on the left speaker and stream the wirelessly via Bluetooth to the right speaker for stereo sound.

TROUBLESHOOTING

Speakers not pairing together:

1. Make sure the right battery powered speaker is fully charged.
   To do this use the UBC-C charger provided and plug into a power outlet. When you put it on charge, the right LED will solid RED. Once the battery is full the LED will turn off.

2. Make sure the left mains powered speaker is plugged into a power outlet and the outlet is switched on.

3. Turn on both speakers, their left LED should be flashing blue. If they are not, this means they are currently paired to another device. To cancel any pairing from a previous device – press the Bluetooth and – buttons at the same time. The LED’s will now flash blue. (do this for each speaker)

4. If they the left LED’s are both flashing blue, wait 30 seconds – if they still do not pair together (you will know when they are paired together as the will announce “left channel, right channel”). On the left speaker hold the Bluetooth button until it beeps
   (and the left LED flashed blue/red) this will manually make it search for the right speaker. The right speaker must be flashing blue to be found.

5. They will now pair together.

6. Now you can pair to the set, either via your mobile device’s Bluetooth settings (looks for “Get Together Duo x 2”). Or via a Bluetooth turntable by turning on the turntable and pressing pair on the Bluetooth turntable. If this does not happen in 30 seconds, press the Bluetooth button again on the turntable to re-initiate the search feature.

SPEAKER NOT PLAYING AUDIO VIA AUX/RCA IN

1. Double check the speakers have power. For the left speaker, make sure it is plugged into a power outlet and turned on. For the right speaker make sure the battery is fully charged.
2. Double check the RCA or AUX cables are plugged securely into the output device and the speakers 9even remove and check there is no dust/debris on the ports)
3. Then ensure the speakers are set to the correct input mode. For AUX the left LED on the speaker should be red, and for RCA the left led should be purple. To cycle through modes, you turn the speaker on by holding the power button. You then press the power button to cycle through modes. The modes go Bluetooth (blue), AUX in (red), RCA line in (purple).
4. To play via AUX/RCA and still use the true wireless stereo. The AUX/RCA line in MUST be in the left mains powered speaker as this is the master. You then need the speaker set to the correct input mode (AUX/RCA). Then the right battery powered speaker must be in Bluetooth mode and flashing blue to indicate it is looking for the left speaker. If it is solid blue, press the Bluetooth icon and – button to forget the pairing. Then hold the Bluetooth button on the left master until it beeps, and the left led flashes red and blue this means it is searching for the right speaker. It will pair within 30 seconds. Now you will be playing via RCA/AUX into the left speaker and streaming via Bluetooth to achieve wireless stereo.

Marley and the Marley logo are registered trademarks of Fifty-Six Hope Road Music Limited and the use of such marks by House of Marley is under license. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc. and any use of such marks by The House of Marley is under license.
Operating frequency bands: 2402 – 2480MHz
CE BT Max Power Transmitted Power:
LEFT: EM-JA019L = 2.98dBm
RIGHT: EM-JA019R = 4.18dBm
DISTRIBUTED BY:
House of Marley, LLC
3000 N Pontiac Trail
Commerce Township, MI 48390 USA
Distributed in the UK by: FKA Brands Ltd,
Somerhill Business Park, Tonbridge, Kent TN11 0GP, UK
EU Importer: FKA Brands Ltd, 29 Earlsfort Terrace,
Dublin 2, Ireland
IB-EMJA019-0221-01

Get Together Duo/ True Wireless Bluetooth8 Speaker

COMPONENTS

LEGEND

• A Mains Power Socket
• B. AUX in
• C. RCA Line in
• D. USB-C charging port
• E. Bluetooth LED
• f. Power LED
• G. Volume down l skip backward
• H. Volume up/ skip forward
• I. Play/Pause/TWS Connect
• J. Power/ Mode select –
  BT/ AUX IN/ RCA line in

BLUETOOTH®

RCAINPUT AUX INPUT CONTROLS Full instruction and warranty details can be found at https://www.thehouseofmat1e.com/ custom support/instruction-books

COMPLIANCE INFO

GET TOGETHER DUO

READ ALL INSTRUCTIONS BEFORE USE AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user Is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the ,receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radian technician for help.

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received. including ,interference that may cause undesired operation.

FCC RF EXPOSURE STATEMENT:
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.

CAUTION
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to opera1e the equipment.

ISEDC STATEMENT
This device complies with Innovation, Science, and Economic Development Canada license-exempt ASS standard(s). Operation is subject to the following two conditions:

1. This device may not cause Interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003,.

ISEDC RF EXPOSURE STATEMENT:
The device is compliant with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance.

BATTRY REPLACEMENT STATEMENT IN EUROPE
Your Get Together Duo includes a rechargeable battery designed to last the lifetime of the product. In the unlikely event that you should require a replacement battery, please contact Consumer Relations who will supply details of the warranty and out-of-warranty replacement battery service.

BATTERY DIRECTIVE
This symbol indicates that batteries must not be disposed of in the _ domestic waste as they contain substances which can be damaging to the environment and health. Please dispose of batteries in designated collection points.

WEEE EXPLANATION
This marking indicates that this product should not be disposed with A other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
Hereby, FKA Brands Ltd, declares that this radio equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. A copy of the Declaration of Conformity can be obtained from www.thehouseofmarley.co.uk/declaration-of-conformity.

To prevent possible hearing damage, do not listen at high volume levels for long periods. Full instruction and warranty details can be found at
http://www.thehouseofmarley.com/instructlonbooks.

Marley and the Marley logo are registered trademarks of Fifty-Six Hope Road Music Limited and the use of such marks by House of Marley
is under license. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc. and any use of such marks by

The House of Marley is under license.

Operating frequency bands: 2402 – 2480MHz
CE BT Max Power Transmitted Power:
LEFT: EM-JA019L = 2.98dBm
RIGHT: EM-JA019R = 4.18dBm

DISTRIBUTED BY:
House of Marley, LLC
3000 N Pontiac Trail
Commerce Township, Ml 48390 USA

Distributed in Europe by FKA Brands Ltd.,
Somerhill Business Park, Five Oak Green Rd,
Tonbridge, Kent TN11 0GP, UK

WARRANTY

House of Marley, LLC sells its products with the intent that they are free of defects in manufacture and workmanship for a period of two (2) years from the date of original purchased, except as noted below. House of Marley, LLC warrants that its products will be free of defects in material end workmanship under normal use and service. This warranty extends only to consumers and does not e1xtend to Retailers.

To obtain warranty service on your House of Marley, UC product, contact a Consumer Relations Representative by telephone at 1-888-251-1076 for assistance. Please be sure to have the model, number of the product available.

House of Marley, LLC does not authorize anyone, including, but not limited to, Retailers, the subsequent consumer purchaser
of the product from a Retailer or remote purchasers. to obligate House of Marley, LLC in any way beyond the terms set forth herein. This warranty does not cover damage caused by misuse or abuse,; accident: the attachment of any unauthorized accessory; alteration to the product; improper installation; unauthorized repairs or modifications; improper use of electrical power supply; loss of power; dropped product: malfunction
or damage of an operating part from failure to provide manufacturer’s recommended maintenance; transportation damage: theft; neglect; vandalism; or environmental conditions; loss of use during the period the product is at a r1epair facility
or otherwise awaiting parts or repair; or any other conditions whatsoever that are beyond the control 01· House of Marley, LLC.

This warranty is effective only if the product is purchased and operated in the country in which the product is purchased. A product that requires modifications or adoption to enable it to operate in any other country than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications is not covered under this warranty.

The warranty provided herein shall be the sole and exclusive warranty. There shall be no other warranties express or implied including any implied warranty of merchantability or fitness or any other obligation on the part of the company with respect to products covered by this warranty. House of Marley, LLC shall have no liability for any incidental, consequential, or special damages. In no event shall this warranty require more than the repair or replacement of any part or parts which are found to be defective within the effective period of the warranty. No refunds will be given. If replacement parts for defective materials are not available, House of Marley, LLC reserves the right to make product substitutions in lieu of repair or replacement.

This warranty does not extend to the purchase of opened, used, repaired, repackaged and/or resealed products, including but not limited to sate of such products on internet auction sites and/or sales of such products by surplus or bulk resellers. Any and all warranties or guarantees shall immediately cease and terminate as to any products or parts thereof which are repaired, replaced, altered, or modified, without the prior express and written consent of House of Marley, LLC.

This warranty provides you with specific legal rights. You may have additional rights which may vary from state to state and country to country. Because of individual state and country regulations, some of the above limitations and exclusions may not apply to you.
In India: Warranty is only for products imported and marketed by Imagine Marketing Pvt. Ltd.
Contact: Imagine Marketing Pvt. Ltd. Consumer Relations at 022-42102401.

WARRANTY – AUSTRALIA (TWO YEAR WARRANTY)
We or us means HoMedics Australia Pty Ltd ACN 31103
985 717 and our contact details are set out at the end of this warranty; You means the purchaser or the original end-user of the Goods. You may be a domestic user or a professional user; Supplier means the authorized distributor or retailer of the Goods that sold you the Goods in Australia and New Zealand; and Goods means the product or equipment which was accompanied by this warranty and purchased in Australia and New Zealand.

Our Goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled, subJect to the provisions of the Australian Consumer Law. to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled, subject to the provisions of the Australian Consumer Law, to have the Goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. This is not a complete statement of your legal rights as a consumer.

FOR NEW ZEALAND:
Our Goods come with guarantees that cannot be excluded under the Consumer Guarantees Act 1993. This guarantee applies in addition to the conditions and guarantees implied by that legislation.

THE WARRANTY:
HoMedics Australia Pty Ltd sells its products with the intent that they are free of defects in manufacture and workmanship under normal use and service. In the unlikely event that your HoMedics Australia Pty Ltd product proves to be faulty within 2 year from the date of purchase due to workmanship or materials only, we will replace it at our own expense, subject to the terms and conditions of this guarantee. The warranty period is limrted to 3 months from the date of purchase for products used commercially/professionally.

TERMS AND CONDITIONS:
In addition to the rights and remedies that you have under the Australian Consumer Law, Consumer Guarantees Act of New Zealand or any other applicable law and without excluding such rights and remedies warranty against defects:

1. The Goods are designed to withstand the rigors of normal household use and are manufactured to the highest standards using the highest quality components. Whilst unlikely, if, during the first 24 months (3 months commercial use) from their date of purchase from the Supplier (Warranty Period), the Goods prove defective by reason of improper workmanship or materials and none of your statutory rights or remedies apply, we will replace the Goods, subject to the terms and conditions of this warranty.

2. We do not have to replace the Goods under this Additional Warranty tf the Goods have been damaged due to misuse
   or abuse, accident, the attachment of an operating part from failure to provide manufacturer’s recommended maintenance, transportation damage, theft, neglect. vandalism, environmental conditions or any other conditions whatsoever that are beyond the control of HoMedics Australia Pty Ltd.

3. This Warranty does not extend to the purchase of used,  repaired or second-hand products or to products not imported or supplied by HoMedics Australia Pty Ltd, including but not limited to those sold on offshore internet auction sites.

4. This Warranty extends only to consumers and does not extend to suppliers.

5. Even when we do not have to replace the goods, we may decide to do so areaway. In some cases, we may decide to substitute the goods with a similar alternative product of our choosing. All such decisions are at our absolute discretion.

6. All such replaced or substituted goods continue to receive the benefit of this Additional Warranty for the time remaining on the original warranty period (or 3 months. whichever is the longest).

7. This Additional Warranty does not cover items damaged
   by normal wear and tear including but not limited to chips, scratches, abrasions, coloration and other minor defects, where the damage has negligible effect on the operation or performance of the goods.

8. This Additional Warranty is limited to replacement or substitution only. /ls far as the law permits. we will not be liable for any loss or damage caused to property or persons arising from any cause whatsoever and shall have no liability for any incidental, consequential, or special damages.

9. This warranty is only valid and enforceable in Australia and New Zealand.

MAKING A CLAIM:
In order to claim under this Warranty, you must return the goods to the supplier (place of purchase) for replacement. If this is not possible, please contact our Consumers Relations by email at thehouseofmar1ey@homedics.com.au or at the address below.
All returned goods must be accompanied by satisfactory proof of purchase which clearly indicates the name and address of the supplier, the date and place of purchase and identification of the product. It is best to provide an original. legible and unmodified receipt or sales invoice. You must bear any expense for return of the goods or otherwise associated with making your claim under this Additional Warranty.

Distributed in Australia by
HoMedlcs Australia Pty Ltd,
14 Kingsley Close, Rowvllle
Victoria 3178.

Distributed in New Zealand by
Phoenix Distribution NZ Ltd,
4 Lovell Court, Albany
North Shore 0632, Auckland, New Zealand

References

• Bob Marley – Dedicated to the life & legacy of Tuff Gong.
• House of Marley Bluetooth Speakers, Headphones, Earbuds & Turntables Inspired by Bob Marley — One Love Movie Giveaway
• House of Marley | Bluetooth Speakers, Headphones & Earbuds inspired by Bob Marley

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>