PHILIPS NeoPix Prime 2 Home Projector User Manual

NeoPix Prime 2
Home projector
User Manual

Register your product and get support at www.philips.com/support

Introduction

Dear customer

Thank you for purchasing this projector.
We hope you enjoy this product and the many functions it offers!

About this user manual

The quick start guide supplied with this product allows you to start using this product quickly and easily. Detailed descriptions can be found in the following sections of this user manual.
Read the entire user manual carefully. Follow all safety instructions in order to ensure proper operation of this product (see General safety information, page 4). The manufacturer accepts no liability if these instructions are not followed.

Symbols used
Notice
Troubleshooting
This symbol indicates tips that will help you in using this product more effectively and easily.

DANGER!
Danger of personal injury!
This symbol gives a warning of the danger of personal injury. Physical injury or damage can result from improper handling.

CAUTION!
Damage to the product or loss of data! This symbol gives a warning of damage to the product and possible loss of data. Damage can result from improper handling.

What’s in the box

1. NeoPix Prime 2 projector (NPX542/INT)
2. Remote control with 2 AAA batteries
3. A/C power adapter
4. Lens cover
5. Quick Start Guide
6. AC power cable with plug x 4

Customer service center

You can find the support hotline in the warranty card or online: Web: www.philips.com/support 
Mail: philips.projector.eu@screeneo.com
International Phone: +41 215 391 665
Please ask your provider for international call costs!
Access the electronic user manual at https://support.screeneo.com
Access the community forum at https://community.screeneo.com

General safety information

Take note of all warnings and safety notes indicated. Do not make any changes or settings that are not described in this user manual.
Incorrect operation and improper handling can lead to physical injury, damage to the product or loss of data.

Setting up the product

This product is for indoor use only. Place the product securely on a stable, flat surface. To help avoid possible injuries to persons or damage to the product itself, position all cables in such a way that no one will trip over them.
Do not operate the product in damp rooms. Never touch the mains cable or the mains connection with wet hands.
Never operate the product immediately after moving it from a cold location to a hot location. When the product is exposed to such a change in temperature, moisture may condense on the crucial internal parts.
The product must have sufficient ventilation and must not be covered. Do not put the product in closed cabinets, boxes, or other enclosures when in use.
Protect the product from direct sunlight, heat, intense temperature fluctuations and moisture. Do not place the product in the vicinity of heaters or air conditioners. Observe the information on temperature listed in the technical data (see Technical data, page Technical data, page 23).
Prolonged operation of the product causes the surface to become hot. In case of overheating, the product automatically switches to standby mode.
Do not allow liquids to leak into the product.
Turn off the product and disconnect it from the mains supply if liquids or foreign substances leaked into the product. Have the product inspected by an authorized service center.
Always handle the product with care. Avoid touching the lens. Never place heavy or sharp objects on the product or on the power cable.
If the product gets too hot or emits smoke, shut it down immediately and unplug the power cable. Have your product checked by an authorized service center? Keep the product away from open flames (e.g. candles).

DANGER!
Risk of explosion with the incorrect type of batteries! There is a risk of explosion if the wrong battery type is used.

Do not expose the batteries (battery pack or embedded batteries) to excessive heat such as sunshine, or open fire.
Under the following conditions, a layer of moisture can appear inside the product which can lead to malfunctions:

• if the product is moved from a cold to a warm area;
• after a cold room is heated;
• when the product is placed in a damp room.

Proceed as follows to avoid any moisture buildup:

1. Seal the product in a plastic bag before moving it to another room, in order for it to adapt to room conditions.
2. Wait for one to two hours before you take the product out of the plastic bag.

The product should not be used in a very dusty environment. Dust particles and other foreign objects may damage the product.
Do not expose the product to extreme vibrations. This may damage the internal components.
Do not allow children to handle the product without supervision. The packing materials should be kept out of the hands of children.
For your own safety, do not use the product during thunderstorms with lightning.

Repairs

Do not repair the product yourself. Improper maintenance can result in injuries or damage to the product. The product must be repaired by an authorized service center.
Please find the details of authorized service centers on the warranty card supplied with this product.
Do not remove the type label from this product, as this will void the warranty.

Power supply

Use only a power adapter that is certified for this product (see Technical data, page 23). Check whether the mains voltage of the power supply matches the mains voltage available at the setup location. This product complies with the voltage type specified on the product.
The power outlet shall be installed near the product and shall be easily accessible.
CAUTION!
Always use the button to turn the projector off.
Turn off the product and unplug from the power outlet before cleaning the surface (see Cleaning, page 20). Use a soft, lint-free cloth.
Never use liquid, gaseous or easily flammable cleansers (sprays, abrasives, polishes, alcohol). Do not allow any moisture to reach the interior of the product.
DANGER!
Risk of eye irritation!
This product is equipped with a high-power LED (Light Emitting Diode), which emits very bright light. Do not look directly into the projector lens during operation. This could cause eye irritation or damage.

Overview

Top view

1. Focus adjustment knob
Adjust image sharpness.
2.

• Switch the projector on or to standby.
• When the projector is switched on, the LED turns white. When the projector is on standby, the LED turns red.

3. Return to a previous menu screen.
   4. OK
   Confirm a selection or entry.
   5. Navigation buttons

•  Navigate menu options.
• On the home screen, press once more to display shortcut options; press once or more to exit shortcut options.

6. Quick access to settings options (e.g. picture and sound options).

• Access and select an input source.
• Quick access to settings options (e.g. picture and sound options).

Front view

1. Projection lens
2. Front IR sensor

Side view

1. ---

   3.5 mm audio output; connect to external speakers or headphones.
   2. AV
   3.5 mm audio/video input; connect to the analog audio jacks and/or composite video jack on a playback device.

2. Micro SD card slot
   Connect to a Micro SD card for media play.
   4. HDMI 1
   Connect to the HDMI output on a playback device.
   5. HDMI 2
   Connect to the HDMI output on a playback device.
3. USB port
   Connect to a USB storage device for media play.
   7. DC
   Connect to the power supply.

Rearview

1. VGA port
   Connect to the VGA port on a computer
   2. Rear IR sensor

Remote control

1. LED indicator

• Each time you press a button on the remote control, the LED lights up briefly then off.
• Blue light indicates the remote control is Bluetooth paired with the projector and the on-screen pointer can be enabled.
• Red light indicates the remote control works with the projector via infrared signals only, and the on-screen pointer cannot be enabled.

• Access and select an input source.
• Quick access to settings options (e.g. picture and sound options).

3. OK
Confirm a selection or entry.
4.

• When browsing apps, access more options.
• When playing media, access more options.

5. Access the home menu.
   6.
   Increase or decrease volume.
   7.
   Enable or disable the on-screen pointer.
   8.
   Quick access to apps windows.
   9.
   Start, pause or resume media play.
   10.
   Return to a previous menu screen.
   11. Navigation buttons

• Navigate menu options.
• On the home screen, press once more to display shortcut options; press once or more to exit shortcut options.

12.
Quick access to settings options (e.g. picture and sound options).

13.
Switch the projector on or to standby.

Initial operation

Placement

You can install the projector in four different configurations. Follow the guidelines below for different projector placement.
Notice
For overhead mounting on the ceiling, purchase a projector mount recommended by an installation professional and follow the instructions that come with the mount.
Before mounting on the ceiling, make sure the ceiling can support the weight of the projector and mounting kit.
For ceiling installation, this product must be securely attached to the ceiling in accordance with the installation instructions. An improper ceiling installation may result in accident, injury, or damage.
Front table

1. Place the projector on a table in front of the projection screen. This is the most common way to position the projector for quick setup and portability.
2. On the home screen, press once or more to display the shortcut options. Then select the icon on the upper right of the home screen and press OK , then go to Projection Image Setting – Projection Mode – FrontDesktop.

Front ceiling

1. Mount the projector on the ceiling upside up in front of the projection screen. A projector mount is required to mount the projector on the ceiling.

Adjust projection to the correct position.
On the home screen, press once or more to display the shortcut options. Then select the icon on the upper right of the home screen and press OK , then go to Projection Image Setting – Projection Mode – FrontCeiling.

Rear table

1. Place the projector on a table behind the projection screen. A special rear projection screen is required.

Adjust projection to the correct position.
On the home screen, press o nce or more to display the shortcut options. Then select the icon on the upper right of the home screen and press OK , then go to Projection Image Setting – Projection Mode – RearDesktop.

Rear ceiling

1. Mount the projector on the ceiling upside up behind the projection screen. To mount the projector on the ceiling behind the screen, a projector mount and a special rear A projection screen is required.

Adjust projection to the correct position.
On the home screen, press once or more to display the shortcut options. Then select the icon on the upper right of the home screen and press OK , then go to Projection Image Setting – Projection Mode – RearCeiling.

Connect power supply

CAUTION!
Always use the button to turn the projector on and off.

1. Select a supplied power cable with an appropriate power plug (EU, UK, US, CH).
2. Connect the power adapter with the power cable to the socket on the projector, and then to the wall outlet.
   • The LED on the projector turns red.

Prepare the remote control

CAUTION!
The improper use of batteries can lead to overheating, explosion, risk of fire, and injury. Leaking batteries can possibly damage the remote control.
Never expose the remote control to direct sunlight.
Avoid deforming, dismantling, or charging the batteries. Avoid exposure to open fire and water. Replace empty batteries immediately. Remove the batteries from the remote control if not in use for long periods of time.

1. Open the battery compartment.
2. Insert the supplied batteries (type AAA) with correct polarity (+/- ) indicated.
3. Close the battery compartment.

• When using the remote control with infrared signals, point the remote control at the IR sensor on the projector, and make sure there is no obstacle between the remote control and the IR sensor.

Power on and setup

1. Press to turn on the projector. The LED on the projector turns from red to white.
   • To turn off the projector, press two times. The LED on the projector turns from white to red.
   • The distance between the projector and the screen determines the actual size of the image.

Screen size adjustment

The projection screen size (or size of images) is determined by the distance between the lens of the projector and the projection surface. This projector has a projection distance from  80 cm to 200 cm, and thus creates a projection image size from 20″ to 80″.

Digital zooming

You can use digital zoom to reduce the screen size up to 60%.
Press on the remote control to display the settings options. Then navigate to select Geometry Corrections – Digital Zoom.
Another way to access the digital zooming function is as follows. On the home screen, press once or more to display the shortcut options. Then select the icon on the upper right of the home screen and press OK , then go to Projection Image Setting – Digital Zoom.
2.  Press / to adjust screen size with 60100% scaling range.

Screen height adjustment

To adjust the screen height when placing the projector on the table, turn the angle adjustment knob located on the bottom of the projector.

Image focus adjustment

To adjust image focus, turn the focus knob on the top of the projector.

Image shape adjustment

Auto-correction
Enable auto keystone correction to automatically correct the image to be rectangular.
1. On the home screen, press once or more to display the shortcut options. Then select the icon on the upper right of the home screen and press OK to access the system settings.

• First, go to Projection Image Setting – Gyro Horizon. Perform calibration to achieve optimal horizontal projection.
• Then go to Projection Image Setting – Auto Keystone – On. Initialize automatic correction of the projection. Make sure to select Projection Image Setting – Keystone dvanced – Front to activate the Auto Keystone option.

Manual correction
You can manually correct keystone or distorted images to be rectangular.
Press on the remote control to display the settings options. Then navigate to select Geometry Corrections – Manual. Another way to access manual image correction as follows. On the home screen, press once or more to display the shortcut options. Then select the icon on the upper right of the home screen and press OK, then go to Projection Image
Setting – Manual Keystone.
Make sure to select Projection Image Setting – Keystone Advanced – Front to activate the Manual Keystone option.
2. Press / to adjust the image shape.
Customized correction (4-corner correction)
You can manually adjust the image shape by re-positioning four corners of the projection image. This also lets you correct the left or right position of the projector.
Press on the remote control to display the settings options. Then navigate to select Geometry Corrections – 4-Corner. Another way to access 4-corner correction is as follows. On the home screen, press once or more to display the shortcut options. Then select the icon on the upper right of the home screen and press OK, and go to Projection Image Setting – Keystone Advanced – Side (not Front). After that, select Manual Keystone under  Projection Image Setting to activate 4-corner adjustment.

3. In the 4-corner correction interface, press  OK to select an image corner, then press /  to adjust the horizontal positioning values, and / to adjust the vertical positioning values. Repeat the same step to adjust the positioning values of the other image corners if desired.
4. To exit correction mode, press or .

Basic setup

Step 1: set up the language
1. On the home screen, press once or more to display the shortcut options. Then select the icon on the upper right of the home screen and press OK , then go to Language Setting.
Use the Navigation buttons and OK on the remote control to make changes.

•  Language: Select your desired language for on-screen menus.
• Input Method: Select a keyboard input method.
• Android Keyboard Settings: Make settings for the Android keyboard.

Step 2: activate the on-screen pointer
Activate the on-screen pointer (mouse cursor) to replace the function of the Navigation buttons on the remote control. The on-screen pointer is useful when you input text through the pop-up virtual keyboard, browse the Internet, or use certain apps.
Before you can use the on-screen pointer, pair the remote control with the projector.

1.  Go to the Bluetooth settings.
   On the home screen, press once or more to display the shortcut options. Use the Navigation button on the remote control to select Bluetooth to access the Bluetooth setting. Enable Bluetooth by selecting Bluetooth ON/OFF if not enabled.

2. Hold down and on the remote control for five seconds. The remote control is automatically paired with the projector.  “Philips AirMote” is displayed under the paired devices list of the Bluetooth setting.
   • When the remote control is paired with the projector, the LED on the remote control flashes blue briefly each you press a button on the remote control.

To use an on-screen pointer

1. When the remote control is paired with the projector, press on the remote control to display or cancel the on-screen pointer.
2. When the pointer (a circular mark) is displayed on the projection screen, move the remote control in the air then the pointer moves across the screen correspondingly.
3. Press the OK button on the remote control to confirm the selection.

Step 3: set up the WiFi network
Set up the WiFi network to access online applications and screen mirroring.
What you need

• A wireless network router.
• For best wireless performance and coverage, use an 802.11n router (“WiFi 4”) and the 5 GHz band.

Go to the WiFi settings.
On the home screen, press once or more to display the shortcut options. Use theNavigation button on the remote control to select WiFi to access the WiFi setting. Enable WiFi by selecting WiFi ON/OFF if not enabled.
4. Select your network name from the network list. Then the network password input bar and the virtual keyboard pop up.
• To input your password, you can use the navigation buttons on the remote control, or use the on-screen pointer (see Step 2: activate on-screen pointer, page 11).
5. After you input the password for the network, select Connect on the screen to complete the WiFi setup.

Use home screen

The home screen provides easy access to a wide range of Internet applications, setup, and other useful features on the projector.

Shortcut options

The projector has shortcut options which are located on the upper right of the home screen. Access the shortcut options via either of the following ways.

• On the home screen, press once or more on the remote control to display the shortcut options.
  To exit the shortcut options, press once or more on the remote control.

• Enable the on-screen pointer and position it in the area above the app list on the home screen. The shortcut options appear.
  To exit shortcut options, position the on-screen pointer in the area below the shortcut options.

Easy setup

Select the setup icon from the app list on the home screen to access the following settings:

• Select language and time zone
• Activate on-screen pointer
• Set up a WiFi network

Refer to the “Basic setup” section for similar and detailed setup operations.

Access online services

Some pre-loaded Internet applications are available on the home screen.

• Before access to the applications, make sure the projector is connected to the Internet. On the home screen, press once or more to display the shortcut options then use the Navigation buttons to select WiFi.
• Use the Navigation buttons and OK on the remote control to select and open an application.
• To uninstall applications on the home screen, select an application, then press on the remote control to access the Uninstall option.

Notice
New applications (apps) will be automatically installed on the projector with firmware updates (see Update software, page 20).

Customize home screen wallpaper

1. On the home screen, press once or more on the remote control to display the shortcut options.
2. Use the Navigation button on the remote control to select Change Wallpaper, then press / too select a pre-saved picture as the background on the home screen. Press OK to confirm.

Screen navigation and keyboard input

The projector provides several alternative methods for you to navigate across the projection screen and input text.

Use the remote control

Before you can use this feature, make sure that the remote control is paired with the projector for remote control (see Step 2: activate onscreen pointer, page 11).

Use wired keyboard/mouse

• Simply connect the USB-A plug of your wired mouse or keyboard to the USB port on the projector.
• Use the keys on the keyboard for screen navigation, selection, and text input, just like the keyboard operation with a computer.
• Use the buttons on the mouse for navigation and selection.

Use Bluetooth Keyboard/mouse/gamepad

1. Pair your Bluetooth keyboard, mouse, or gamepad with the projector as follows:
   • On the home screen, press once or more to display the shortcut options. Use the Navigation button on the remote control to select Bluetooth to access Bluetooth settings. Enable Bluetooth by selecting Bluetooth ON/OFF if not enabled. In the Bluetooth settings interface of the projector, select your Bluetooth keyboard, mouse, or gamepad name from the Bluetooth device list.

2. After pairing, you can use the Bluetooth keyboard, mouse, or mouse with the projector.

Connect to playback devices

Notice
Make sure all devices are disconnected from the power outlet before establishing or changing any connections.

Connecting to devices through HDMI

Connect a playback device (e.g. a Blu-ray player, gaming console, camcorder, digital camera, or PC) to the projector through an HDMI connection. With this connection, images are shown on the projection screen, and audio is played on the projector.

1. Using an HDMI cable, connect the HDMI 1 or HDMI 2 connector on the projector to the HDMI output on the playback device.
2. Press to display the input source list, and then select HDMI 1 or HDMI 2.

Connecting to devices through AV

Connect a playback device (e.g. a DVD player, gaming console, camcorder, or digital camera) to the projector through an AV connection. With this connection, images are shown on the projection screen, and audio is played on the projector.

1. Using an RCA cable with a 3.5 mm plug, connect the AV connector (3.5 mm) on the projector to the analog audio output jacks (red and white) and/or composite the video output jack on a playback device.
2. Press to display the input source list, and then select AV.

Connecting to a computer through VGA

Connect a computer (e.g. a desktop or laptop) to the projector. With this connection, images are shown on the projection screen.
Notice
Many laptops do not activate the external video output automatically when you connect a second display such as a projector. Check your laptop user manual to find out how to activate the external video output.

1. Using a VGA cable, connect the VGA connector on the projector to the VGA output on a computer.
2. On your computer, adjust the screen resolution of the computer to the correct setting and switch the VGA signal to an external monitor. The following resolutions are  supported:
   | Resolution| Image refresh rate
   ---|---|---
   VGA| 640 x 480| 60 Hz
   SVGA| 800 x 600| 60 Hz
   XIA| 1024 x 768| 60 Hz
   WXGA| 1280 x 768| 60 Hz
   HD| 1280 x 720| 60 Hz
   FULL HD| 1920 x 1080| 60 Hz
3. Press to display the input source list, and then select VGA.

Connecting to external speakers or headphones

Connect external speakers or headphones to the projector. With this connection, audio from the projector is played through the external speakers or headphones.
DANGER!
The danger of hearing damage!
Before connecting the headphones, turn down the volume on the projector. Do not use the projector over a longer time at high volume – especially when using headphones. This could lead to hearing damage.

1. Using a 3.5 mm audio cable, connect the connector on the projector to the analog audio input (3.5 mm jack, or red and white jacks) on the external speakers. Or connect the connector on the projector to headphones.
   • The speakers of the projector are deactivated automatically when the external speakers or headphones are connected to the projector.

2. When connecting to the headphones, use the volume control on the remote control to adjust the volume to a comfortable level.

Browse storage devices

Through the projector, you can access and play the pictures, audio, and video files stored on the local storage and the networked device.

1. Connect a USB storage device to the USB port on the projector.
   • Or connect a Micro SD card to the MICRO SD slot on the projector.

2. Select the File Manager icon on the home screen to access the files stored.

3. Select the local storage device or the networked device.
   •If the local storage device is selected, you are prompted to select the internal storage or the connected storage (e.g. a USB flash drive, HDD, camcorder or digital camera).
   •If the networked device is selected, make sure the WiFi network is connected and a shared network device is accessible.

4. The file browser is displayed. Use the navigation buttons and OK on the remote control to select and open files.

Play video from storage devices

1. From the file browser displayed, navigate to access the folders on the storage device.
2. To access video files, make sure the video icon on the left side of the file browser is selected. Select a video file, and press OK to start video playback.
3. During playback, the playback control bar appears at the bottom of the screen. You can press on the remote control to hide or display the control bar.
   • Use / on the remote control to select a control playback icon then press OK to confirm. The control playback bar offers various functions, such as:
   • Pause/resume play
   • Select a previous/next playback file
   • Fast forward/backward
   • Skip to a specific part of the video by entering the time of the scene. Using / on the remote control to input time.
   • Repeat a video section.
   • Select sound effects and picture effects.

Play music from storage devices

1. From the file browser displayed, navigate to access the folders on the storage device.
2. To access music files, make sure the music icon on the left side of the file browser is selected. Select a music file, and press OK to start music playback.
3. During playback, the playback control bar appears at the bottom of the screen. You can press on the remote control to hide or display the control bar.
   • Use / on the remote control to select a control playback icon then press OK to confirm. The control playback bar offers various functions, such as:
   • Pause/resume play
   • Select a previous/next playback file
   • Repeat and shuffle play
   • Select sound effects.

View photo from storage devices

1. From the file browser displayed, navigate to access the folders on the storage device.
2. To access picture files, make sure the picture icon on the left side of the file browser is selected. Select a picture file, and press OK to display the picture.
3. When the picture is displayed, the playback control bar appears at the bottom of the screen. You can press on the remote control to hide or display the control bar.
   • Use / on the remote control to select a control playback icon then press OK to confirm. The control playback bar offers various functions, such as:
   • Select a previous/next picture file
   • Zoom in or out of the picture
   • Rotate the photo clockwise or anticlockwise.
   • Select picture effect

Wireless projection

This projector allows you to wirelessly mirror the following devices to the projection screen.

• iOS devices
• Mac
• Android devices
• Windows PC

Screen mirroring for iOS devices and Mac

You can share the screen contents of your iOS device or Mac on the projection screen. What you need

• Enable WiFi both on the projector and your iPhone/Mac, and the two are in the same WiFi network.

1. Make sure AirPlay is enabled on the projector.
   On the home screen, press once or more to display the shortcut options. Use theNavigation button on the remote control to access AirPlay TMto check whether AirPlay is enabled. Once enabled, you do not need to enable it again later.

2. On your iPhone, access ‘Control Center’ by sliding the screen up, and selecting the ‘Screen Mirroring’ option. Then select the projector name under ‘Screen Mirroring’ to connect your iPhone to the projector. Or on your Mac, access the screen mirroring option located on the top of the computer screen, then select the projector name to connect your  Mac to the projector.

3. After successful connection, the screen contents of your iPhone/Mac are cast to the projection surface.

Cast video for iOS devices

You can cast videos from your iOS device on the full projection screen.
What you need

• Enable WiFi both on the projector and iPhone/Mac, and the two are in the same WiFi network.

1. Make sure AirPlay is enabled on the projector. On the home screen, press once or more to display the shortcut options. Use the Navigation button on the remote control to access AirPlay TM to check whether AirPlay is enabled. Once enabled, you do not need to enable it again later.
2. View online video on your iPhone and tap the TV icon on the video picture to access Apple TV mode. The video is now cast and played on the full projection screen.

Notice
For better streaming performance, use a 5 GHz WiFi network.
Copy-protected (DRM) content cannot be streamed.

Trademark notice
Apple, AirPlay and the AirPlay logo are trademarks or registered trademarks of Apple, Inc. in the US and other countries.
Google, Android, and the Android logo are trademarks or registered trademarks of Google, Inc. in the US and other countries.

Screen mirroring for Android devices/Windows PC

You can share the screen contents of your Android device or Windows PC on the projection screen.
What you need

• An Android device that supports Miracast (or Screen Mirroring). The feature name can be also known as Screencast, Screen Sharing, WiFi Direct, and Wireless Display,
  etc. Not all Android devices have this feature. Refer to your device user manual for details.

• Enable WiFi both on the projector and your Android device (or Windows PC).
  1 Enable Miracast function on the projector.  On the home screen, press once or more to display the shortcut options. Use the Navigation button on the remote control to select Miracast TM to enable Miracast.

• A message window is displayed to prompt you to activate the wireless display function (screen mirroring) on your Android device (e.g. a mobile phone, or tablet).
  2 On your Android device (or Windows PC), access the screen mirroring function. Then select the projector name under the screen mirroring device list to connect your Android device to the projector.
  3 After successful connection, the screen contents of your Android device (or Windows PC) are cast to the projection surface.

• Several minutes may be needed for the picture to appear after the streaming starts.

Notice
For better streaming performance, use a 5 GHz WiFi network.
Copy-protected (DRM) content cannot be streamed.
Google Pixel Phones are not compatible with this Screen Mirroring system.

Change settings

This section helps you change the following two system settings:

• Operating system
• Projector system

Operating system settings

1. On the home screen, press once or more to display the shortcut options. Then select the icon on the upper right of the home screen and press OK to access various setting options.
2. Use the Navigation buttons and OK to select and change settings.

WiFi settings
Go to WiFi Setting to access the following settings.

• WiFi Setting: Turn WiFi on or off on the projector. Connect the projector to the WiFi network. Use the pop-up virtual keyboard to input letters and digits.
• Proxy: Set the proxy host and proxy port to access the Internet. Use the pop-up virtual keyboard to input letters and digits.

Bluetooth settings
Go to Bluetooth Setting to pair the projector with the projector’s remote control or a Bluetooth keyboard/mouse/gamepad.
Notice
The projector cannot be used for streaming music through Bluetooth.

Picture settings
Go to Projection Image Setting to access the following settings.

• Gyro Horizon: Automatically calibrate the horizontal projection to the optimal. Perform calibration before you enable auto keystone correction (Auto Keystone) of the projection.
  Place the projector on a level surface before calibration.

• Projection Mode: Adjust the projection to the correct position based on different installations of the projector.

• Keystone Advanced: Enable or disable 4-corner image correction. Select Side to enable 4-corner image correction.

• Auto Keystone: Enable or disable auto keystone correction of the projection.
  Perform calibration (Gyro Horizon) before you enable auto keystone correction of the projection.

• Manual Keystone: Manually correct the image shape. Or access 4-corner image correction if the function is enabled by selecting Keystone Advanced – Side.

• Digital Zoom: Scale the projection image within the range from 60% to 100%.

Notice
If Side is selected under Keystone Advanced, the Auto Keystone option is invisible and the Manual Keystone option is enabled for 4-corner image correction.
Language and keyboard settings Go to Language and input method Setting to access the following settings.

• Language: Select a language for on-screen menus.
• Input Method: Select a keyboard input method.
• Android Keyboard Settings: Access various settings for the Android keyboard (e.g. intelligent word correction and suggestion).

Date and time settings
Go to Date Setting to access the following settings.

• Automatically update date and time, or manually set date, time, and time zone.

Apps management
Go to Application Setting to access the following settings.
• Check an app version, app size and cache size.
• Clear cache size or uninstall an app. Restore default settings

1. Go to System Update then select Restore  Factory.
2. Follow the on-screen instructions to start or cancel resetting.

Notice
After resetting to the default settings, all the files and apps you installed are completely erased. Back up your files if you need to reset the projector.

Other system settings
Go to Other Setting to access the following settings.

• Boot Source Option: Select or deselect an input source to start up the projector.
• Mouse speed: Change the speed at which the on-screen point moves.

System information checking
Go to System Info to check the following system information: product name, system version, free and total internal memory, free and total ROM, and MAC address.

Projector system settings

1. Press or on the remote control to access the projector system setting options.
2. Use the Navigation buttons and OK to select and change settings.

Input source selection
Go to Input Source to access the following settings.

• Select and activate an input source (HDMI1, HDMI2, VGA, AV) corresponding to an external device that is connected to the projector.
• Select Philips OS when a USB storage device is connected or no other external device is connected.

Image options
You can access the image setting options, such as:

• Picture Adjustments: Set the values for brightness, contrast, saturation, and sharpness.
• White Balance: Select a white balance option to best reproduce colors under different lighting conditions. Or configure your own color balance between red, green, and blue.
• Picture Preset: Select a predefined color brightness setting for picture and video display.

Sound options
You can access the following sound setting options.

• Surround Sound: Enable or disable surround sound effects.
• Sound Preset: Select a preset sound effect.

Scheduled shutdown
Go to Sleep Timer to select a time option that enables the projector to automatically turn off at a specified period of time.

Other options
You can also access the following options.

• Check software version, hardware version, serial number of this product.
• Restore default settings.
• Software update via a USB device (see update SW through USB, page 21).

Service

Cleaning

DANGER!
Instructions for cleaning!
Use a soft, lint-free cloth. Never use liquid or easily flammable cleansers (sprays, abrasives, polishes, alcohol, etc.). Do not allow any moisture to reach the interior of the projector. Do not spray the projector with any cleaning fluids.
Wipe over the surfaces gently. Be careful that you do not scratch the surfaces.

Cleaning the lens

Use a soft brush or lens cleaning paper for cleaning the lens of the projector.
DANGER!
Do not use any liquid cleaning agents! Do not use any liquid cleaning
agents for cleaning the lens, to avoid
damaging the coating film on the lens.

Update software

The latest software of the projector can be found on www.philips.com/support for you to get the best features and support from the projector.
Before you update the software of the projector, check the current software version:

• On the home screen, press once or more to display the shortcut options. Then select the icon on the upper right of the home screen and press OK, then go to About – System  Version.

CAUTION!
Do not turn off the projector or remove the USB flash drive during the update.
Update SW through Internet

1. Connect the projector to the Internet.

2. On the home screen, press once or more to display the shortcut options. Then select the icon on the upper right of the home screen and press OK, then go to System Update – Online Update.
   If an upgrade media is detected, are prompted to start or cancel the update.

3. Follow the on-screen instructions to complete the update.

Update SW through USB

1. Check the latest software version on www.philips.com/support. Find your product (model number: NPX542/INT), and locate ‘Software and drivers’.

2. Download the software into the USB flash drive. Unzip the downloaded software file and save it in the root directory of the USB flash drive.
   • After unzipping, make sure the “KJ-3S022. bin” file is included.

3. Connect the USB flash drive to the projector.

4. On the home screen, press once or more to display the shortcut options. Then select the icon on the upper right of the home screen and press OK, then go to System Update – Local Update.

5. Follow the on-screen instructions to complete the update.

Troubleshooting

Power cycling
If a problem occurs that cannot be corrected with the instructions in this user manual, follow the steps given here.

1. Turn the projector off by pressing it two times
2. Wait at least ten seconds.
3. Turn the projector on by pressing once.
4. If the problem persists, please contact our technical service center or your dealer.

cable, and try to turn the projector on again.
The projector cannot be turned off.| • Press and hold longer than ten seconds. If this does not work, disconnect the power cable.
No image from the external HDMI device.| • Check if the correct HDMI input is selected (HDMI 1 or HDMI 2).
• Disconnect the HDMI cable or switch off the HDMI device.
• Wait three seconds.
• Reconnect the HDMI cable or switch on the HDMI
No sound from the externally connected device.| • Check the cables to the external device.
• Check that the sound is activated on the external device.
• Only the original cables from the device manufacturer may function.
No sound from the external HDMI output device.| • On the HDMI output device set the audio setting to Multichannel (Raw data) & Stereo (PCM).
No sound when you connect your computer via HDMI cable.| • Check that the sound is activated on the computer.
Only the home menu appears and not the image from the external device.| • Check if the cables are connected to the correct sockets. |
• Check that the external device is turned on.
• Check if the video output of the external device is turned on.

Only the home menu appears and not the image from the connected computer.| • Check that the VGA output of the computer is turned on.
• Check if the resolution of the computer is set to 1920*1080 (for VGA connection) or 080P (for HDMI connection).
---|---
The projector turns itself off.| • When the projector is running for a long period of time, the surface becomes hot.
• Check that the power cable is connected correctly.
The projector cannot read the USB storage device.| • The projector does not support the exFAT file system.
• Format the USB storage device in FAT32 or NTFS format, then use it.
The projector does not react to remote control commands.| • Check the batteries of the remote control.
Measures to take if Screen Mirroring does not work anymore after a firmware update of an Android or iOS device?| • We recommend checking regularly for new firmware of your projector (see Update software, page 20).
Screen mirroring does not work with the available Android device.| • In order to allow screen mirroring, your device must support Miracast. Not all Android devices support this function. The function name can be also known as Screencast, Screen Sharing, WiFi Direct, Wireless Display, etc.
• Please refer to the user manual of your Android device to check if this function is supported and how it can be enabled.
When I view videos, the sound or the picture is sometimes distorted or the sound is not synchronized to the picture.| • The available WiFi bandwidth is insufficient for sending the video flawlessly from the smartphone to the projector. This can happen if one or more WiFi networks operate in the same frequency range nearby. Certain IoT devices (e.g. ZigBee enabled devices) also operate in this frequency range.
• Your smartphone is not fast enough to compress the screen data and send it simultaneously over WiFi.
• Your smartphone may maintain parallel connections to your home network and the projector. This will reduce the available bandwidth. Disabling temporarily the connection to your home network may help.
The temperature of the projector’s surface is warm.| • For this projector it is normal to generate moderate heat during operation.
What to do if the projector does not work when connecting to a notebook PC?| • Check that the HDMI cable is plugged incorrectly.
• Make sure that the notebook PC has been switched to projector display.

Appendix

Technical data

Technology/optical
Display technology ……………………………………….LCD
Light source ……………………………………………………LED
Resolution …………………………………1280 × 720 pixel
Resolution supported …………… 1920 x 1080 pixel
LED lifetime ………………………….over 30,000 hours
Contrast ratio ……………………………………………. 3000:1
Aspect ratio ……………………………………………………16:9
Throw ratio …………………………………………………….1.31:1
Screen size (diagonal)……………………….. 20″ to 80″
Screen distance…………………………………. 80 cm – 200 cm / 24”- 60”
Keystone correction ……….. automatic or manual
Projection modes………………………………….front, rear, front, ceiling
Focus adjustment …………………………………….manual
Digital zoom …………………………………yes (60-100%)
4-corner correction ………………………………..yes (45°)
Boost source …………………………………HDMI or Apps
Integrated media player ………………………………… yes
Internal memory ………………………………………….16 GB
Sound
Built-in speakers ………………………………………..2 x 5W
Connection
Wi-Fi ……………………802.11a/b/g/n/ac, 2.4+5GHz,
………………………………………………Airplay, Miracast
Bluetooth ……connection for Airmote, keyboard, mouse, or gamepad
Connectivity………2 x HDMI, VGA, AV in (3.5 mm),
………………………..Micro SD card slot, USB (2.0),
………………………………. headphone out (3.5 mm)
Power source
Power consumption ………………..operating: 100 W
………………………………………………..Standby: 0.3 W
Power supply ………………………………. power adapter
…………….Input: 100-240V~, 50/60Hz, 1.4A (max)
…………………………… Output: DC 24.0V, 3.0A, 72.0W
Supported devices
Android ……………………. Miracast support required
iOS …………………………………………………….. 7/8/9/10/11
Apps
Preloaded apps …………………….. Smart Philips OS
YouTube, MX Player Pro…(continuously expanding and thus may differ when shipping)
Product details
Dimensions (W × D × H) ………220 x 170 x 90 mm
Weight …………………………………………………………..1.2 kg
Operating temperature…………………….. 5 °C – 35 °C
Storage temperature ……………………………….. < 60 °C
Package content
NeoPix Prime 2 projector, remote control with 2 AAA batteries, AC adapter, power cables (EU, UK, US, CH), lens cover, Quick Start Guide

CE statement

• The product shall only be connected to a USB interface of version USB 2.0 or higher.
• The adapter shall be installed near the equipment and shall be easily accessible.
• The operating temperature of the EUT can’t exceed 35°C and shouldn’t be lower than 5°C.
• The plug is considered as a disconnect device of the adapter.
• The UNII Band 5150-5250 MHz is for indoor use only.
• The device complies with RF specifications when the device is used at 20 cm from your body.

Hereby, Screeneo Innovation SA declares that this product is in compliance with essential requirements and other relevant provisions of Directive 2014/53/EU.

The Declaration of Compliance can be
consulted on the site www.philips.com.

FCC statement

15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
15.21 Information to the user.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
15.105 Information to the user.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

During operation, the separation distance between the user and the antenna shall be at least 20 cm. This separation distance will ensure that there is a sufficient distance from a
properly installed externally-mounted antenna to satisfy the RF exposure requirements.
FCC ID: 2ASRT-NPX542

Other notice

Preservation of the environment as part of a sustainable development plan is an essential concern of Screeneo Innovation SA. The desire of Screeneo Innovation SA is to operate systems respecting the environment and consequently it has decided to integrate environmental performances in the life cycle of these products, from manufacturing to commissioning use and elimination.

Packaging: The presence of the logo (green dot) means that a contribution is paid to an approved national organization to improve package recovery and recycling infrastructures. Please respect the sorting rules set up locally for this kind of waste.
Batteries: If your product contains batteries, they must be disposed of at an appropriate collection point.
Product: The crossed-out waste bin symbol on the product means that the product belongs to the family of electrical and electronic equipment. In this respect, the European regulations ask you to dispose of it selectively:

• At sales points in the event of the purchase of similar equipment.
• At the collection points made available to you locally (drop-off center, selective collection, etc.).

In this way, you can participate in the reuse and upgrading of Electrical and Electronic Equipment Waste, which can have an effect on the environment and human health.
The paper and cardboard packaging used can be disposed of as recyclable paper. Has the plastic wrapping been recycled or disposed of it in non-recyclable waste, depending on the requirements in your country?
Trademarks: The mentioned references in this manual are trademarks of the respective companies. The lack of the trademarks ®and ™ does not justify the assumption that these dedicated terminologies are free trademarks. Other product names used herein are for identification purposes only and may be trademarks of their respective owners.
Screeneo Innovation SA disclaims any and all rights in those marks.
Neither Screeneo Innovation SA nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of an accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or failure to strictly comply with Screeneo Innovation SA operating and maintenance instructions.
Screeneo Innovation SA shall not be liable for any damages or problems arising from the use of any options or any consumable materials other than those designated as original
Screeneo Innovation SA/PHILIPS products or Screeneo Innovation SA/PHILIPS approved products.
Screeneo Innovation SA shall not be held liable for any damage resulting from electromagnetic interference that occurs from the use of any interface cables other than those designated as Screeneo Innovation SA/PHILIPS products.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,  photocopying, recording, or otherwise, without the prior written permission of Screeneo Innovation SA. The information contained herein is designed only for use with this product. Screeneo Innovation SA. is not responsible for any use of this information as applied to other devices.
This user manual is a document that does not represent a contract.
Errors, printing errors, and changes are reserved.
Copyright © 2020 Screeneo Innovation SA.

PHILIPS and the PHILIPS’ Shield Emblem have registered trademarks of Koninklijke Philips N.V. used under license.
This product was brought to the market by Screeneo Innovation SA., further referred to in this document as Screeneo Innovation SA., and is the manufacturer of the product.
2020 © Screeneo Innovation SA.
All rights reserved.
Headquarters:
Screeneo Innovation SA.
Route de Lully 5C
1131 – Tolochenaz – Switzerland
www.philips.com/welcome
NeoPix Prime 2

References

• Philips Customer Service Support - Home | Philips
• Philips - United States | Philips
• Philips Customer Service Support - Home | Philips
• Login
• Philips Projection - Find help, share ideas, and get updates

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>