Geryst BE1036 True Wireless Earbuds User Guide
- June 6, 2024
- Geryst
Table of Contents
Geryst BE1036 True Wireless Earbuds User Guide
What’s in the box?
-
Wireless Earbuds
-
Charging Case
-
Eartips (S,L)
-
Small Earhooks
-
Type-C Cable
-
User Manual
Product Diagram
- LED Indicator / Microphone
- MFB button
- Charging Pin
- Type-C charging port
- LED Indicator
Charging
- Remove the protective film from the earbuds when using for the first time.
- Fully charge both earbuds and the charging case before the first-time using.
- To prevent damage, use the provided USB-C cable.
- Fully dry off the earbuds and the USB port before charging.
If the charging case has run out of battery. Charging case will enter deep-
sleep state, it will not light up while charging.
Keep charging for 20 mins till the case light up to activate the charging
case.
LED Behavior
How to fit?
- Identify the left and right earbuds
- Rotate the earbuds,and ajust to find the best angel
- Make sure the ear tip seals in the ear canal
How to replace the earhook?
Pairing your earbuds
- Both earbuds will automatically turn on and start pairing when taken out of the charging case.
- Selet “BE1036” from the list of devices shown
Each earbud could be used independently
Note:
The earbuds will automatically connect with the device their last paired with
when earbuds are power on.
Function
| Power On | Click and hold R and L for 3 seconds | |
|---|---|---|
| Power Off | Pause the music first, Click and hold R and L for 5 seconds |
Play / Pause| | Click (R/L)
Next Track| | Double-Click (R)
Previous Track| | Double-Click (L)
Volume UP/Down| Click and hold the MFB button of Left earbuds to turn up the
volume. Click and hold the MFB button of Right earbuds to turn down the
volume.
Answer / hang up| | Click (R/L)
Reject| | Double Click (R / L)
Voice-Assistant| | Triple Click (R / L)
Reset and Reconnecting
If you fail to build connection between two earbuds, or between two earbuds and your phone,please try the follow step:
- Step 1: Delete the old connection on your device.
- Step 2: Turn on both earbuds, quickly click the MFB of both earbuds 5 times when they are in pairing mode.
Specification
lnput
|
DC 5V/1A
---|---
Version
| V5.1
Profile|
A2DP,AVRCP, HFP, HSP
Maximum Working Range
| 10m(without obstacle)
Earbuds battery life|
Up to 6 hours(various by volume and audio content)
Earbud Charging Time
| About 1.5 hours
Earbud Battery Capacity|
50mAh
Charging Case Battery Capacity
| 500mah
Product Weight|
About 80 g