Geryst BE1037 True Wireless Earbuds User Guide
- June 6, 2024
- Geryst
Table of Contents
BE1037
TRUE WIRELESS EARBUDS
Please read this manual carefully before using the product and keep it in a safe place.
What’s in the box?
Product Diagram
|
---|---
-
LED Indicator/ Microphone
-
MFB button
-
Charging Pin
-
Type-C charging port
-
LED Indicator
-
charging
- Remove the protective film from the earbuds when used for the first time.
- Fully charge both earbuds and the charging case before the first-time use.
- To prevent damage, use the provided USB-C cable.
- Fully dry off the earbuds and the USB port before charging.
If the charging case has run out of battery. The charging case will enter a deep-sleep state, it will not light up while charging. Keep charging for 20 mins till the case lights up to activate the charging case.
2. LED Behavior
3. pairing your earbuds
- Both of the earbuds will turn on automatically and start pairing when taking out the earbuds from the charging case.
- Select “BE1037” from the list of devices shown
Each earbud could be used independently
Note:
When the earbuds are powered on, the earbuds will connect with the device they
paired on last time automatically.
4. function
| Power On | Click and hold R and L for 3 seconds | |
|---|---|---|
| Power Off | Pause the music first, Click and hold |
Rand L for 5 seconds
Play/ Pause| | Click (RIL)
Next Track| | Double-Click (R)
Previous Track| | Double-Click (L)
Volume Up/Down| Click and hold the MFB button of the Left earbuds to turn up
the volume. Click and hold the MF B button of the Right earbuds to turn down
the volume.
Answer/ hang up| | Click(R/L)
Reject| | Double Click(R/L)
Voice -Assistant| | Triple Click(R/L)
5. Reset and Reconnecting
If the 2 earbuds can’t be paired successfully or you can’t connect the earbuds
with your phone, please try to repair it as the steps as below:
Step1: Delete the Bluetooth connection record on your phone.
Step2: Tum on the 2 earbuds at the same time, and click the MFB of the
earbuds 5 times quickly till they enter pairing mode.
6. specification
| input | DC5V/IA |
|---|---|
| Version | V5.1 |
| Profile | A2DP, AVRCP, HFP, NSP |
| Maximum Working Range | 10m( without obstacle) |
| Earbuds battery life | Up to 6 hours(varies by volume and audio content) |
| Earbud Charging Time | About 1.5 hours |
| Earbud Battery Capacity | 50mAh |
| Charging Case Battery Capacity | 500mah |
| Product Weight | About 80 g |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>