FUKUMARU FC-S03 Automatic Cat Feeder Instruction Manual

FUKUMARU FC-S03 Automatic Cat Feeder

Product Information

• Rated input: 5V== 1A

• Wireless connection: WiFi- 2.4GHz

• Applicable group: Cat and small dog

• Material: ABS304 SUS

• Food capacity: 4L

• Power supply: Type-C Cable, 4 AA batteries

• Status of indicator light:

  • Blue light: Normal operation
  • Blue flashing light: WiFi connection
  • Red light always on Food shortage alert
  • Green flashing light: Sending the pet food
  • Yellow light: Network connection failed

• Power supply mode:

  • WiFi Remote app control: Battery power only (4 AA
    batteries)

  • Wired power only: 1* Type-C Cable

• Use scene suggestions:

  • Daily at home: Battery or wired power
  • During trip/vacation: Battery or wired power

• Allowed kibble size: Dry food 2 – 15 mm / 0.08 – 0.6 inches in diameter

Product Usage Instructions

1. Scan the QR Code to watch the installation video.
2. Pull out the food container and take out bowls and cardboard sheets.
3. Attention:
   • In pure battery power supply mode, the device will enter sleep mode in 3 minutes, and the app does not support remote control. You can insert 4 AA batteries into the battery compartment as a backup power source in case of wired power network failure.
   • When the food is delivered for the first time, there may be no food or just a small amount in the bowl. Repeat the operation 2-3 times to use it normally.
4. How to remote control:
5. Download the ‘Smart Life’ app by scanning the QR Code or searching for it in the app store.
6. Power on the device. Note: In pure battery power supply mode, the device will enter sleep mode in 3 minutes, and the app does not support remote control unless reactivated by pressing the feeding button and waiting 3 seconds to reconnect the app.
7. Make sure the WiFi indicator blue light is flashing. If not, reset the network configuration by pressing 5 seconds on the feeding button.
8. Open the Smartlife app and add the device, following the app instructions.
9. Connect to the 2.4GHz WiFi network and enter the same WiFi name and password.

PACKAGE INCLUDED

1. please use the qua iied DC 5v 1A Power adapter.
2. please use alkaline AA batteries as an emergency plan. Do NOT Use rechargeable batteries.
3. The batteries are not included.

PRODUCT INFO

Rated input

|

wireless connection

|

Material

|

Food capacity

---|---|---|---

5V== 1A

|

WiFi- 2 .4GHz

| ABS＋304 SUS|

4L

Applicable gr up

|

power supp y

cat and sma dog

|

Type-C Cable, 4 AA batteries

TATUS OF INDICATOR LIGHT

Blue

no rm a l y on

| Blue

lashing

| The red light is always on| Green light flashing|

yellow right

---|---|---|---|---
Normal operation| wiFi

connection

| Food shortage alert| sending the pet food| Network connection failed

ATTENTION ： In pure battery power mode, to save power, the device will turn off the indicated light and start sleep mode in around 3 minutes, so the APP Shows that it’s of me and can’t be remotely controlled unless reactivated it by pressing the feeding button and wait3sto reconnect the app .fthe feeding plan has already been set online before, even if it sof mine, the device will still auto-execute the feeding plan.

PRECAUTIONS

INTENDED USE

1. This product is an automatic pet feeder with an app to schedule and control the feeding times and number of portions.
2. This product is intended for dispensing dry cat or dog food only.
3. This product works best with food 2 – 15mm / 0 . 08 – 0 . 6 inches in diameter.
4. The product is intended for indoor use only.
5. The product is not intended for professional use.
6. Any modii action of the product may have consequences for safety, warranty, and proper functioning ·
7. This product is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the product by a person responsible for their safety.

WARNING

1. Ensure you have fuy read and understood the instructions in this document before you install or use the product. keep this document for future reference.
2. on y use the product as described in this document.
3. Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
4. Do not drop the product and avoid bumping. To prevent pets from falling down, it is recommended to place the feeder in the corner or against the wall.
5. This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock
6. Do not expose the product to water or moisture.
7. Do not place any foreign objects in the feeder.
8. Do not place anything n top of the feeder.
9. Never immerse the product in water or place it in a dishwasher.
10. Do not expose the product to direct sunlight, naked flames, or heat.
11. Disconnect the product from the power source before service and when replacing parts.
12. children should be supervised to ensure that they do not play with the product. 13 . only power the product with the vo tage corresponding to the markings on the product.
13. Disconnect the product from the power source and other equipment if problems occur.
14. Do not dismantle, open, or shred secondary cells or batteries. Always use a UVIED adapter, power cord, and dry batteries.

HOW TO GET STARTED

scan the QR Code to watch the installation video. Attention :

1. In pure battery power supply mode, the device will enter sleep mode in 3 minutes, and the APP does not support remote control.
2. You can also insert 4 AA batteries into the battery compartment as a backup power source, in case of wired power network failure.

Attention
when the food is delivered for the first time, there may be no food or just a small amount in the bowl. please repeat the operation 2 – 3 times to use it normally.

HOW TO REMOTE CONTROL

APP Download

1. and scan the QR Code right with your smartphone.
2. search the ‘smart life’ App from the APP Store.

Then follow the steps below

1.  power on the device. (Note: In pure battery power supply mode, the device will enter sleep mode in 3 minutes, and the APP does not support remote control unless reactivated by pressing the feeding button and waiting 3s to reconnect the app)

2. Make sure the WIFl indicator blue light is flashing. if not, please reset the network configuration/press 5s on the feeding button to reset the device.

3. open the Smart Life APP and add the device, follow the app instructions.

4. connect to the 2.4GHz Wi-Fi network, and enter the same Wi-Fi name and password with your smartphone. (The device doesn’t support 5GHz Wii yet. )

5. set/update the device.

6. Meal call recording.

7. set feeding plan.

8. camera interactive.

9. Listen to your pet’s voice

10. Long press to speak to your pets.

11. For a better user experience, please keep the device in the latest version ·

CLEANING ＆ MAINTENANCE

1. Always unplug or disconnect the feeder from the electrical supply with dry hands whenever the feeder is being installed, maintained, or handled.
2. Regularly clean the food dispenser with a slightly damp cloth to ensure that kibble is able to be dispensed smoothly. Do NOT Clean the dispenser using water, as this may damage the electrical components inside. Make sure that no water gets into the battery compartment.
3. The food container and food bowls can be removed from the base and cleaned with running water under the tap. Always dry these parts completely before reassembling the product.
4. The desiccant pad should be replaced every 15 days to ensure a minimal dehumidifying effect. Do not use the desiccant pad if it is visible y damaged
5. please use a used DC 5v 1A Power adapter and power cord.
6. change the batteries every 6 months if not in use for a long time.
7. Do not lift the feeder only with a lid, food container, bowl, or tray. Lift or transport the feeder by holding the food container and base with both hands, while keeping it in an upright position.
8. store the feeder against a wall or corner to avoid tipping

HOW TO ASSEMBLE THE IMPELLER

1. Align the shape of the impeller buckle with the dispenser slot.
2. Align ” ▲ ” and ” ● “, press the impeller down, and fatten it.
3. Rotate it right to lock align “▲” and v ·

Attention : May get f od stuck if the impeller does t assemble correctly.

WARRANTY

1. The 12-month product warranty period
2. After-sales service provided for product issues caused by non -non-non-artificial reasons.
3. For any questions, please contact us via fukumaru@hzdare.com.

TROUBLESHOOTING

what should l do if l can’t connect to the Internet？

1. Make sure the device has been powered on;
2. check if the network is stable, and check whether it is 2. 4GHz wiFi;
3. check whether the mobile phone’s Wi-Fi and Bluetooth are authorized;
4. check whether it is within the network coverage.
5. Try to reboot the router and wait 3 minutes to observe the status of the device；
6. Make sure the home Wi-Fi network is working well, or whether the Wi-Fi name, password, etc have been modiied. If So, reset the device and add it again. (How to remove the device: open the smart life APP and enter the device control page, click the ‘… button on the top right and corner, click ‘ Device Management then choose this device to remove. )

what about stocking food？

1. clean out the food and check whether the distribution impeller is installed correctly (whether the alignment mark is aligned).
2. check whether the motor is abnormal: put your ears close to the machine to see if you can hear the rotating sound, or pour out the kibbles, take out the impeller, operate the device， and see if the motor rotates

The APP shows that it is often e, can it still deliver er food normally？
set the feeding plan when the blue light is always on and then y u can feed normally of ine or during sleep mode, but the feeding record is not displayed on the APP. After the device wakes up, the APP Will display the previous feeding record ·

when the battery is in use and without wired power, the light goes out, and can it still produce food normally？
In the pure battery state, the device will automatically turn off the light in 30 seconds , and will automatically sleep after 3 minutes (at this time, the APP will display that the device is of mine). This function is to prolong the battery life without affecting the normal grain output.

After the network abnormality causes the device to go offline withe normal device automatically connects to the Internet.
After the network abnormality causes the device to go offline, the device will automatically restart twice. After restarting, the device will detect the surrounding network environment and reconnect to the network. lf the device cannot detect the network after two restarts, please check the network server first, and then manually power off and restart the device.

can it be used without WIFI？
The first startup requires WIFI Connection settings, the feeder only supports 2. 4GHz WIFI. It can not support 5GHz wif

FQAs

• Q: How to reset the device？
  A: press and hold the device feeding button for 10 seconds, when the indicator light turns off and y u hear a “di “, y u can connect to the internet. (please complete the networking within 3 minutes. If the feeder enters the no-network state after 3 minutes, you need to cut off the power supply and then power it on again) .

• Q: How to record me ca voice？

• Q: can this be used for wet pet food？
  A: The machine only works with dry food ·

• Q: can it work for larger dogs？
  A: This would be more suited for a small or medium pet.

• Q： How many pounds of dry pet food can it hold？
  A: This Automatic cat Feeder can hold 4 liters of dry food, it is suitable for cats and small dogs.

• Q： Does this feeder work with larger kibble sizes？
  A: The grain size applicable to our products is 2 – 15mm / 0 . 08 – 0 . 6 inches in diameter, and please i it with dry pet food on Y.

• Q: what is the maximum portions that can food come out per time feeding？
  A: 6 portions per time feeding

• Q: How much volume of each portion？
  A: Each portion is about 7 – 12g~0 . 25 – 0 . 420z， which volume varies depending on the density of the food ·

• Q: How many cups does it dispense a day？
  A: 1 portion is about 7 – 12g~0 . 25 – 0 . 420z. You can set up a feeding plan based on your pet’s daily food intake.

• Q: How long wiu the desiccant bag work？ where l can buy the replacement？
  A: Replace it every 2 weeks. You can buy the desiccant bag on Amazon.

• Q: can it run on battery power without the power plug, or is the battery on y for backup in case the power goes out？
  A: yes, but we recommended using it together so that the feeder can continue to work during a power failure or when the battery is dead ·

ABOUT FUKUMARU
FUKUMARU Was established in 2016 and intends to spread the sincere relationship between pets and humans. we aim to build a harmonious pet-human environment in your house through FUKUMARU Products. In adherence to principles of safety practicality, and sustainability we have established a strict quality inspection and safety test process for each product production and keep doing our best to enhance consumers’ experience.

AFTER-SALE SERVICE
please visit www.fukumarupet.com for more installation and after-sale services.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

References

• FUKUMARU

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>