Louise Star Steel Roman Blind User Guide
- May 15, 2024
- Louise Star
Table of Contents
Louise Star Steel Roman Blind
Product Information
Specifications
- Product Type: Roman Blinds
- Installation Methods: Top-Fixing, Face-Fixing
- Bracket Finish: Standard, Cassette
- Minimum Distance for Outermost Brackets: 5cm from rail ends
Usage Instructions
Fitting the Brackets
Standard Finish
Installation Guide – Roman Blinds
The brackets offer two methods of installation: Top-Fixing and Face-Fixing.
Cassette Finish
- These brackets also offer two methods of installation: Top fixing and Face fixing.
- For both finishes, ensure that the outermost brackets are positioned at least 5cm away from the ends of the rail, with other brackets evenly distributed across the width.
Fitting the Blind
Standard Finish
Installation Guide – Roman Blinds
- Situate the front lip of the headrail into the front of the bracket.
- Push the back of the headrail upwards to lock it into the back of the bracket.
Cassette Finish
To fit the cassette into the bracket, hold the cassette at an angle and
locate the central ‘lip’ along the top of the cassette onto the front ‘hook of
the bracket.
Raise the back of the cassette up and push up firmly into the brackets until you hear them ‘snap’ into place.
Child Safety
Installation Guide – Roman Blinds
You must take precautions to prevent young children from being harmed by
cords or loops associated with the blinds.
- Keep cords out of reach of children to prevent strangulation and entanglement.
- Ensure cords do not create loops by not tying them together and avoiding twists.
- Use cord retaining devices at a safe distance from control mechanisms to maintain cord tension.
- Securely attach retaining devices to walls using provided fixings.
FAQ
Q: How do I ensure proper cord safety with Roman Blinds?
A: To ensure cord safety, keep cords out of reach of children, avoid
creating loops, and use cord retaining devices at a safe distance from control
mechanisms.
Installation Guide
Roman Blinds
Standard finish
The brackets offer two methods of installation:
Cassette finish
These brackets also offer two methods of installation:
For both finishes, note that the position of the outermost brackets should be at least 5cm away from the ends of the rail, with any other brackets evenly distributed across the width.
Fitting the blind
Standard finish
Cassette finish
- To fit the cassette into the bracket, hold the cassette at an angle and locate the central ‘lip’ along the top of the cassette, onto the front ‘hook of the bracket.
- Now raise the back of the cassette up and push up firmly into the brackets until you hear them ‘snap’ into place.
Child Safety
WARNING
- Young children can be strangled by loops in pull cords, chains, tapes and inner cords that operate the product.
- To avoid strangulation and entanglement, keep cords out of the reach of young children. Cords may become wrapped around a child’s neck.
- Move beds, cots and furniture away from window covering cords.
- Do not tie cords together. Make sure cords do not twist and create a loop.
- The cord retaining device must be installed at the maximum distance possible from the control mechanism to prevent looped cords from becoming slack.
- Place the retaining device on the wall and mark the position of the screw hole(s) with a pencil.
- Attach the retaining device to the wall using the fixings provided.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>