DENVER LDS-5575 Smart TV User Guide
- June 6, 2024
- Denver
Table of Contents
SMART TV with DVB-T2/S2/DVB-C and
H.265/HEVC Support
Model: LDS-5575
Quick start guide
The full user manual can be found by searching for this model
the number at www.denver-electronics.com.
Safety Information
IMPORTANT SAFETY INSTRUCTIONS-READ CAREFULLY BEFORE USE.
Take note of the following safety information which appears on the back of the
TV.
CAUTION: TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE ANY SCREWS AND
COVERING, NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
This symbol indicates the important information in the accompanied operating
instructions. Always read this information carefully.
This symbol indicates that dangerous voltage constituting a risk of electric
shock is present within this unit.
Read and keep these instructions.
- Do not use this product near water.
- Clean the product only with a slightly damp cloth.
- Do not block any ventilation openings on the product.
- Install this product in accordance with the supplied Quick Start Guide and the User Guide.
- Protect the power cable from being walked on or pinched, particularly at plugs and the point where it exits from the TV.
- Do not allow the power cable to overhang the edge of a table.
- Unplug the product during lightning storms or when unused for a long period of time.
WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE
THIS TV TO RAIN OR MOISTURE. THE TV MUST NOT BE EXPOSED TO DRIPPING AND
SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS SHOULD BE PLACED NEAR THE TV.
NOTE: No naked flames such as candles should be placed near the TV.
Smell/odor from TV
New televisions may emit an unusual smell or odor when first turned on.
Due to the manufacturing process of components, televisions and other
electronic products can have parts that may emit a smell after the product is
first turned on and warms up.
The smell will usually dissipate within a few days of use and does not return.
This is normal and occurs with many electronic products. Please ensure there
is sufficient ventilation around the TV and in the room and the odor will
dissipate.
Front View
Button assignments
(standby): Switch the TV on or to standby.
(source): Press to select a source.
(menu): Press to display the OSD menu; press again to exit the menu.
**CH+/CH-:** Press to scan through channels; move down/up in the OSD menu
screen.
(volume up or down): Press to adjust the volume; move left/right in the
OSD menu screen; the (volume up) button can be used to skip to a next
menu.
Connections
LAN (RJ45)
port: Connect an RJ45 plug to an external modem or network access equipment.
HDMI port: Connect a DVD/Blu-ray player or another HDMI device
TV1 (S2) jack: Connect a satellite signal.
TV2 (T2/C) jack: Connect to an aerial socket on the wall with the RF
coaxial cable.
OPTICAL jack: Connect to an external digital audio device.
CI (Common Interface): Cl slot.
AV jacks: Connect to the audio & video output terminals of a DVD player.
USB port: Connect to a USB device for multimedia
AUDIO-OUT jack: connect to an external audio device.
Installation of TV channels
This TV comes with a triple digital tuner:
- used for digital terrestrial TV: DVB-T2 – H.265 HEVC;
- used for digital cable TV: DVB-C;
- used for digital satellite TV: DVB-S2.
The TV also has an analog tuner.
When you start the TV for the first time, the first time setup will appear.
You can select a language and country by using the left/right arrow buttons.
After making the settings, press the OK button. The auto-tuning menu screen
appears.
Select a tuning mode: DTV (digital TV), ATV (analog TV), or both.
Then select a digital tuning mode: DVB-T for terrestrial (if you have own
antenna on the roof),
DVB-C (if you have digital cable TV, and you need to know the DVB-C
information from your cable provider) or DVB-S (if you have a satellite dish).
If selecting DVB- T, you can just make an auto scan, and it will scan all
available channels.
If selecting DVB- C, you can use either full scan or network scan (some
countries demand this), and input Network ID, Frequency, Symbol rate, and LCN
on/ off.
I f selecting DVB-S , you have to know what satellite your dish is
pointing towards and select this option in the setup menu.
The TV has a common interface+ input. This allows you to insert a CA module
from your TV/cable provider to watch pay-to-view channels and selectable
channels outside of your package.
Read the instructions shown on the back of the TV on how to insert a CA
module.
Streaming
Press the button on the remote control to display the home menu. Use the arrow buttons to select an item or app on the home menu then press OK. You may also press the hotkey on the remote control to access the desired app directly.
Network Settings
Select wired, wifi, or skip this step.
Attaching the stand
The pictures below are only for reference.
-
The supplied accessories for attaching the stand to the TV
-
How to install the stand?
Place the TV face down on a soft and flat surface (e.g. blanket, foam, cloth, etc.) to prevent any damage to the TV.
Attach the stand to the bottom of the TV as shown below.
-
Warnings.
Please notice – All products are subject to change without any notice. We take reservations for errors and omissions in the manual.
ALL RIGHTS RESERVED, COP YRJGHT DENVER ELECTRONICS A/S
Electric and electronic equipment and included batteries contain materials,
components, and substances that can be hazardous to your health and the
environment if the waste material (discarded electric and electronic equipment
and batteries) is not handled correctly.
Electric and electronic equipment and batteries is marked with the crossed-out
trash can symbol, seen below. This symbol signifies that electric and
electronic equipment and batteries should not be disposed of with other
household waste, but should be disposed of separately.
As the end-user, it is important that you submit your used batteries to the
appropriate and designated facility. In this manner, you make sure that the
batteries are recycled in accordance with the legislature and will not harm
the environment.
All cities have established collection points, where electric and electronic
equipment and batteries can either be submitted free of charge at recycling
stations and other collection sites, or be collected from the households.
Additional information is available at the technical department of your city.
Please enter: www.denver-electronics.com
and then click the search ICON on the top line of the website.
Write model number: LDS-5575.
Now enter the product page, and a red directive is found under downloads/other
downloads.
Operating Frequency Range: 177MHz ~ 803MHz.
Max Output Power: 155W
DENVER ELECTRONICS A/S
Omega 5A, Soeflen
DK-8382 Hinnerup
Denmark
www.facebook.com/denverelectronics
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>