HROEENOI JZ02 Active Noise Cancelling Headphones User Guide

Active Noise Cancelling Headphones
User Guide

Packing List

Product Overview

1. Active noise cancellation (ANC) button
2. Active noise cancellation LED indicator
3. USB-C charge port
4. Previous track/volume – button
5. Next track/volume + button
6. Multifunction button
7. Power on LED indicator
8. 3.5mm audio jack
9. Built-in microphone

Power NO/OFF

• Short press multifunction button (about 1 second), the head­phones will be on, and the power-on indicator will light blue
• Long press multifunction button (about S seconds), the head­phones will be off.
• When active noise cancellation is ON (ANC button is pressed, and the ANC indicator lights green), the head­phones will keep the power on.
• When active noise cancellation is OFF, the headphones will automatically turn off in 5 minutes if no connection with the Blue-tooth device.

Connection With Your Device

Pairing: blue and red indicator flashes alternately
Connected: blue indicator flashes every 10 seconds

• When turned on, JZO2 will automatically connect to the last connected device if available. If not, JZO2 will go-to pairing.
• To connect to a new device: turn Bluetooth off of connected Then turn Bluetooth on of the new device and select JZ02 to connect.
• Having connection problems? Delete JZO2 from the device’s Bluetooth list, and re-connect.

Active Noise Cancellation (ANC) ON/OFF

• Press the ANC button, the active noise cancellation will be on, and the ANC-led indicator will light green steadily.
• Press the ANC button, the active noise cancellation will be OFF.

Phone Calls

Multi-Point Connection

• Connect to two Bluetooth devices at the same time to switch between calls, video conferencing, listening to music, and more without reconnection.
• For example, when connected to laptop and phone simultaneously, you can pause the playing film on the laptop, and switch to the phone to play the paused music. No need for reconnection.

• In case the headphones are connected to the laptop and phone at the same time, and you receive a phone call while watching a film on the laptop, you can answer the phone call immediately by short pressing the multifunction button on the headphones. No need to answer the call on the phone. Very convenient.

Music

Pause/Play
Short press the multifunction button

Next track/Previous track
Long press the +/- button (more than 1 second)

Volume up/down
Volume up/down

Connection via AUX

• When connected via AUX, play audio directly via the connected device
• 3.5mm Audio Jack: You can use it as wired headphones. They give the sound an improvement when using the headphones wired in. When the battery is low or if you want to conserve battery, just switch the wireless mode to wired mode, keep listening with the headphones jack.

Charge Your JZ02

• JZ02 will beep every 2 minutes when it’s on low battery.
• Charging: indicator will light red steadily.

•  Fully charged: indicator will light blue steadily.
• Charging time: about 2 hours.

Specifications

Warnings

• Don’t remove any parts.
• Avoid dropping.
• Do not use under weather conditions or extreme temperatures.
• Do not submerge in water.
• Do not use any corrosive cleaner/oil to clean.

Tips of Using Headphones

Microphone Usage Tips

• The use of the microphone needs to be converted to a Bluetooth mode connection.
• Earmuffs should not be disassembled or assembled without permission. The earmuffs and ear shells are directly attached to the buckles. If they have been disassembled, please check whether each buckle has been inserted into the earmuffs.
• To use these Bluetooth headphones with ZOOM and other software on the computer, it must be in the Bluetooth connection state and change the audio input and output to these Bluetooth headphones in the ZOOM software settings. Use the audio cable to connect without the microphone function.

Bluetooth Connection Occasionally Interrupted

• When you plug in the Type-C Charging Cable to charge the
• When you plug in the AUX Cable as a wired headphone using.
• The playback environment needs to be performed in a stable network environment (avoid the headphones close to other wireless devices (wireless routers, microwave ovens, etc).

Headphones Connect to TV

• The TV has a Bluetooth function.
• Use a Bluetooth transmitter with a USB connector.

Reset your headphones

• When the headphone is on, press and hold the MFB (power button)/V+ button (volume + button) at the same time for 5 seconds, and then restart to complete the reset operation.

Warm Prompt

• Headphones will smell because of the material. If the headphone smells, you should open and leave it for 10-30 minutes before using.
• When the headphones cannot be turned on normally the first time you use them, please charge it for 10-30 minutes before

Customer Support
www.hroeenoilive.com
support@hroeenoilive.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>