WYZE WNCE1BLK 40 dB Active Noise Cancelling Wireless Earbuds User Guide

: June 6, 2024
: Wyze

Table of Contents

GET STARTED
PAIR BLUETOOTH
CONTROL NOISE CANCELLATION
CHARGING
FACTORY RESET
FCC WARNING
IC WARNING
BATTERY WARNING
CAUTION
ATTENTION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

WYZE WNCE1BLK 40 dB Active Noise Cancelling Wireless Earbuds User Guide

WELCOME TO WYZE

Thanks for getting your hands on a pair of Wyze Buds Pro. If this is your first Wyze product, welcome to the Wyze family!

GET STARTED

Download the Wyze app & sign in or create an account.

Open the Wyze app. Tap the + plus sign, then Add a New Device. On the Add Device screen, tap Lifestyle then Wyze Buds Pro. Follow the instructions in the app to complete setup.
You’re all set. Enjoy your Wyze Buds Pro!

PAIR BLUETOOTH

Place the earbuds in the charging case and leave the case lid open. Press and hold the Bluetooth Pairing button on the right side of the charging case until the LED light inside the case starts blinking.

CONTROL NOISE CANCELLATION

Tap and hold the touch area on either earbud to switch noise cancellation modes.

Noise Cancellation On Best for deep focus and an immersive audio experience.

No Noise Cancellation Best for windy environments.

Transparency Mode Amplifies your surroundings. Best for the outdoors and high-traffic areas.

CONTROL MUSIC, PHONE CALLS, VOICE ASSISTANT

Listen to Music

Voice Assistant Set up your favorite voice assistant in the Wyze app.

CHARGING

Your earbuds charge whenever they’re in the charging case. A 15-minute charge provides up to 1 hour of listening time. You can charge the case with the included USB Type-C cable, or with a Qi-Certified wireless charger.

FACTORY RESET

Place the earbuds in the charging case and leave the case lid open. To clear the Bluetooth device list, press and hold the Bluetooth Pairing button on the right side of the case for 7 seconds.

To factory reset the earbuds, press and hold the Bluetooth Pairing button on the right side of the case for 20 seconds.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device has been evaluated to meet general RF exposure requirement. The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue.

Device types Wyze Buds Pro with model WNCE1WHT (FCC ID: 2AUIUWNCE1) has also been tested against this SAR limit. The highest reported SAR values of left earbud for head is 0.07W/kg, and the highest reported SAR values of right earbud for head is 0.20W/kg. This device was tested for typical head operations with the back of these earbuds kept Omm from the head. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

WARNING:

This product can expose you to chemicals including Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

IC WARNING

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment. Such modifications or change could void the user’s authority to operate the equipment. This radio transmitter (identify the device by certification number or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. The SAR limit for Industry Canada is 1.6 W / kg averaged over one gram of tissue. The WNCE1WHT model device types (IC: 25466-WNCE1) were also tested against these values. The highest reported SAR values of left earbud for head is 0.07W/kg, and the highest reported SAR values of right earbud for head is 0.20W/kg. This device was tested for typical head operations with the back of these earbuds kept 0mm from the head. To maintain compliance with RSS-102 requirements, use accessories that maintain a separation distance of 0 mm between the user’s body and the back of the handset. The use of belt clips, cases and similar accessories shall not contain any metal components as a whole. The use of accessories that do not meet these requirements can not meet the requirements of RSS-102, and should be avoided.

BATTERY WARNING

High or low extreme temperatures that a battery can be subjected to during use, storage and low air pressure at high altitude, see below: For ear battery Standard environmental condition: Temperature 25±3°C, Humidity 45-85%RH, Atmospheric Pressure 86-106 KPA; Operating temperature: Charging 0-45°C, Discharging -20°C- 60°C; Humidity 65±20%RH I Storage temperature: -20°C -35°C <3 month, 25±3°C >3 months, Humidity 65±20%RH For charge box battery Standard environmental condition: Temperature 25±3°C, Humidity 45-85%RH, Atmospheric Pressure 86-106 KPA; Operating temperature: Charging 0- +45°C, Discharging -20°C- +60°C; Humidity >90%RH I Storage temperature: 23°C <1 year, charge state 100%, Humidity 80%-150%RH Attention:

CAUTION

Risk of explosion if the battery is replaced by an incorrect type, Replacement of a battery with an ^correct type can defeat a safeguard; Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion. Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas; A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Attention should be drawn to the environmental aspects of battery disposal.

ATTENTION

Do not listen to audio at high volume levels for long periods of time. Doing so may damage your hearing.
Do not use in temperatures greater than 1040F (4000).

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Wyze Labs, Inc. is under license. Other trademarks and trade names are those of their respective owners.

NEED HELP?

Contact our support team:
https://support.wyze.com
Join our Community :
https://wyze.com/community

Scan the QR code to learn more