NONiN 3245 Pulse Oximeter with Bluetooth Smart Technology Instruction Manual

June 6, 2024
NONiN

NONiN LOGO

Download the NoninConnect mobile app from the iTunes® store.
Instructions for Use

NoninConnectTM Model 3245 Pulse Oximeter with Bluetooth® Smart Technology

The NoninConnect Model 3245 Finger Pulse Oximeter measures and displays blood oxygen saturation (%SpO2) and pulse rate. It is used for spot-checking on fingers that are between 0.8 – 2.5 cm (0.3 – 1.0 inch) thick.
NoninConnect is not a medical device and therefore does not require a prescription from a doctor.

Installing AAA Batteries

Before changing batteries, make sure the product is off and is not applied to a finger.

NONiN 3245 Pulse Oximeter with Bluetooth Smart| NONiN 3245 Pulse Oximeter with Bluetooth Smart -FIG 3
---|---
NONiN 3245 Pulse Oximeter with Bluetooth Smart -FIG 1| NONiN 3245 Pulse Oximeter with Bluetooth Smart -FIG
1
NONiN 3245 Pulse Oximeter with Bluetooth Smart -FIG 2

Follow local disposal and recycling laws for the NoninConnect and its components, including batteries.
Keep the oximeter away from young children.
Small items such as the battery door and batter are choking hazards.

Turning On the NoninConnect

NONiN 3245 Pulse Oximeter with Bluetooth Smart -FIG N

Symbols

Symbol

|

Description

---|---
| CorrectCheck™ – slide finger further into the NoninConnect.
| Percent oxygen in your blood.
| Pulse rate.
| Displays when NoninConnect is unable to detect a usable signal.
| White symbol – Radio is on.
Green symbol – Connected.
Flashing white symbol – Connection error. The radio will reset.
| Poor signal. NoninConnect may not work when circulation is reduced. Steady your hand, reposition your finger, warm your finger by rubbing or select a different finger.
| Replace batteries.
| Battery orientation

**SN**

| Serial Number

**BDA**

| Bluetooth Device Address

Connection via Bluetooth Wireless Technology

Download the NoninConnect mobile app from the iTunes® store.
When NoninConnect is placed on the finger and turns on, it is ready for a Bluetooth wireless connection. NoninConnect stays in this mode until it is shut off. Refer to the
Symbols table for the Bluetooth radio symbol descriptions.

Cleaning the NoninConnect Model 3245

  1. To clean, wipe the NoninConnect’s surfaces with a soft cloth dampened with one of the following:
    • A 10% bleach solution (household bleach [5.25% sodium hypochlorite]).
    • Warm, soapy water (hand dishwashing detergent), and then rinse the cleaned surfaces with a soft cloth dampened with water.

  2.  Dry with a soft cloth, or allow to air dry. Ensure that all surfaces are completely dry.
    Caution: Do not place this product in liquid or clean it with agents containing ammonium chloride, isopropyl alcohol, or products that are not listed in these instructions.

NoninConnect™ Model 3245 with NoninConnect App:

The NoninConnect Model 3245 Bluetooth pulse oximeter is designed to be used with the NoninConnect app, a free download from the Apple iTunes® store, and is compatible with the following Apple devices (running iOS 8.1 or later):

  • iPhone® 4S and newer
  • iPad® 3 and newer, all iPad Air®, and all iPad mini™
  • iPod® Touch 5th edition and newer

The NoninConnect iOS app is not compatible with Windows® or Android® devices and operating systems.

Integrators, Software Developers, and Telehealth System Providers: If you want to collect or save data from the NoninConnect Model 3245 to your medical system or custom-made software, contact Nonin Medical, Inc. at oem@nonin.com.You may qualify for direct pricing advantages depending on volume.
Integration and telehealth support are only available through Nonin; therefore, register with Nonin as soon as possible to receive support and important service notifications (e.g., product changes, common operating system connectivity information).
Contact Nonin for Support: oem@nonin.com or nonin.com/eHealth.

Warranty

Nonin warrants to the purchaser, for a period of 2 years from the date of purchase, each NoninConnect Model 3245 exclusive of the batteries and spring. Nonin shall repair or replace any NoninConnect found to be defective in accordance with this warranty, free of charge, for which Nonin has been notified by the purchaser by serial number that there is a defect, provided notification occurs within the applicable warranty period. If unable to repair, Nonin shall replace with a NoninConnect or a comparable product.
This warranty excludes the cost of delivery to and from Nonin. Nonin reserves the right to charge a fee for a warranty repair request on any NoninConnect found to be within specifications. This product is a precision electronic instrument and must be repaired by Nonin Technical Service. Any sign or evidence of opening the NoninConnect, field service by non-Nonin personnel, tampering, or any kind of misuse of the product, shall void the warranty. The NoninConnect is warranted for consumer use only. All non-warranty work shall be done at Nonin’s standard rates and charges in effect at the time of delivery to Nonin.

Specifications

Oxygen Saturation Display Range: 0% to 100% SpO2
Oxygen Saturation Declared Accuracy: 70% to 100% SpO2 ±2 digits
Pulse Rate Display Range: 18 to 321 beats per minute (BPM)
Pulse Rate Declared Accuracy Range (Arms): 20 to 250 BPM ±3 digits
Low Perfusion Pulse Rate Declared Accuracy Range (Arms): 40 to 240 BPM

±3 digits
Temperature:
Operating:
Storage/Transportation:| -5 °C to 40 °C / 23 °F to 104 °F
-40 °C to 70 °C / -40 °F to 158 °F
Humidity:
Operating:
Storage/Transportation:| 10% to 95% non-condensing
10% to 95% non-condensing
Altitude:
Operating:
Hyperbaric Pressure:| Up to 10,000 meters / 32,808 feet
Up to 4 atmospheres
Battery Life:
Operating:
Storage:|

Approximately 2,200 spot checks (25 sec. per spot check), within 10 meters/32 feet of the collector with streaming data 1 month, with batteries, installed.
CAUTION: Remove batteries if the NoninConnect will be stored for more than 30 days.

Bluetooth Wireless Technology Information

Bluetooth Compliance: Version 4.0 single-mode low energy
Operating Frequency: 2.4 to 2.4835 GHz
Output Power: TX: +3 dBm
Operating Range: 10-meter radius (line of sight)
Network Topology: Star – bus
Operation: Slave

NoninConnect
Antenna Type:| Integrated chip-type antenna
Modulation Type: Data Rate:| Frequency Hopping Spread Spectrum
Data Latency:| 1 Mbit/second
Data Integrity:| 6 ms
Antenna Type:| Adaptive Frequency Hopping 24-bit CRC (cyclic redundancy check) 32-bit message integrity check
Data Format:|

Sends data packets once per second. Includes a second counter that allows the host to detect if packets are missing and the NoninConnect to retransmit.

Quality of Service:|

NoninConnect uses Bluetooth Smart technology for wireless communications, which allows for reliable communications in electrically noisy environments,and transmits physiological data once per second. If data is lost, NoninConnect will transmit data again one second later. If the connection is lost, NoninConnect will change the Bluetooth symbol from green to white and become available for a connection in a few seconds.

Bluetooth Profiles Supported:| GATT-based proprietary Nonin profile
Authentication and Encryption:|  Supported
Encryption Key Size:| 128 bits AES (advanced encryption standard)

NONiN LOGO

Nonin Medical, Inc.
13700 1st Avenue North
Plymouth, MN 55441-5443, USA
+1 763-553-9968
800-356-8874 (US and Canada)
Fax: +1 763-553-7807
E-mail: info@nonin.com
nonin.com

The Bluetooth® word mark and logo are registered trademarks owned by Bluetooth SIG, Inc.
Nonin, NoninConnect, and CorrectCheck are trademarks of Nonin Medical, Inc.
U.S. Patents 5,490,523; 5,792,052; other patents pending.
10889-000-01
©2015 Nonin Medical, Inc.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals