POWERTECH MB-3667 Fast Qi Wireless Charger User Manual
- June 6, 2024
- POWERTECH
Table of Contents
POWERTECH MB-3667 Fast Qi Wireless Charger User Manual
BOX CONTENT
-
1 × Wireless Charger
-
1 × USB Power Cable
PRODUCT DIAGRAM
OPERATION
Power:
- Insert the USB power cable in a 5VDC/9VDC USB mains power adaptor (not included) or a suitable USB charging port such as a computer.
- Insert the USB micro B plug in to the USB power socket of the wireless charger.
- The LED status indicator will turn to green.
Note: It is suggested to use a QualcommC) Quick Charge 3.0 USB mains adaptor for fast charging. Please check to see if your device supports quick charge otherwise it will charge at 5W.
CHARGING
- Place your Qi wireless enabled smart device in the centre of the charging pad.
- The LED status indicator will change to blue to indicate that the device is charging.
Note: This device doesn’t support smart watches.
TROUBLESHOOTING
| Problem: | Solution: |
|---|---|
| Will not charge device | Ensure your smartphone supports Qi wireless charging |
Ensure the mobile device is placed directly in the centre of the charging pad
Restart your mobile device and wireless charger
Take off your phone case as it may be interfering with the wireless charger
Will not power on| Ensure the USB cable is connected properly to a suitable
USB mains adaptor or charging port
SAFETY
- Do not place any metal objects, magnets, magnetic stripe cards or metal phone cases between the mobile device and the charger as it may not work properly.
- Keep the wireless charger at least 20cm away from any implantable medical devices such as pacemakers or cochlear, etc. to avoid interference with the medical device.
- Do not open the case of the wireless charger to avoid damage and injury.
- Keep the wireless charger away from high temperatures as it may cause damage to the speaker and battery.
- Do not expose the wireless charger to water, moisture or liquids to prevent the unit from damage.
- If using a third party mains power adaptor; make sure the voltage and current match the specifications as 5VDC or 9VDC.
SPECIFICATION
-
Input: 5VDC @ 2A, 9VDC @ 1.67A
-
Voltage Output: 5VDC, 9VDC
-
Current Output:
5V @ 1A (5W)
9V @ 0.8A (7.5W)
9V@ 1.1A (10W) -
Output Power: 5W/7.5W/10W Charging Efficiency: 73% (Max)
-
Charging Distance: 6rinm
-
Dimensions: 101(Dia) x 20(H)mm
Distributed by:
Tech Brands by Electus Distribution Pty. Ltd. 320 Victoria Rd, Rydalmere NSW
2116 Australia
Ph: 1300 738 555
Intl: +61 2 8832 3200 Fax: 1300 738 500
www.techbrands.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>