POWERTECH SL4100 Solar Rechargeable 60W LED Flood Light Instruction Manual
- May 15, 2024
- POWERTECH
Table of Contents
- POWERTECH SL4100 Solar Rechargeable 60W LED Flood Light
- Product Information
- Product Usage Instructions
- Frequently Asked Questions (FAQ)
- BOX CONTENTS
- INSTALLATION
- REMOTE CONTROLLER INSTRUCTIONS
- IMPORTANT NOTIFICATION
- ABOUT COMPANY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
POWERTECH SL4100 Solar Rechargeable 60W LED Flood Light
Product Information
Specifications
- Model: SL4100
- Type: Solar Rechargeable LED Flood Light
- Power: 60W
- Box Contents: Lamp, Solar Panel, Remote Controller, Support Bracket, Wall Bolts, Operating Manual
Product Usage Instructions
Installation
- Take out the lamp from the packaging.
- Press the AUTO button on the lamp (Primary Version).
- Press the button above to turn on the light automatically.
- Connect the Waterproof connector correctly and place the Solar Panel towards sunlight. The Charging indicator will flash regularly if the batteries are charging correctly.
- Fix the product on the wall using the supplied wall bolts. Recommended installation height is between 3-6 meters.
- Ensure the Solar Panel is installed at the correct angle and direction for optimal charging. Avoid blocking sunlight with obstacles like trees, shadows, or buildings.
Installation Tips
- Install the solar panel facing 5-10 degrees south to west at a 35-degree angle with the horizontal plane.
- Affix the panel firmly to a permanent structure to prevent movement due to winds.
- Use the remote controller to adjust brightness and duration settings for the light.
Remote Controller Instructions
In Light-operated Mode, connect and tighten the Waterproof Wiring
Connector, then press the [AUTO] key to enable automatic light operation based
on darkness and sunlight.
Important Notifications
- Avoid connecting 240VAC to prevent damage and personal injury.
- Ensure secure installation to avoid falling hazards.
- Disassembling any parts will void the warranty.
- Regularly clean the Solar Panels to maintain efficient charging performance.
Frequently Asked Questions (FAQ)
-
Can I connect 240VAC to the unit?
No, connecting 240VAC will damage the lamp and may cause personal injury or electric shock. -
How should I clean the Solar Panels?
Regularly clean the Solar Panels of dust, debris, and bird droppings to maintain optimal charging efficiency.
BOX CONTENTS
- Lamp
- Solar Panel
- Remote Controller
- Support Bracket
- Wall Bolts
- Operating Manual
INSTALLATION
- Once the Waterproof connector is connected correctly,place the Solar Panel towards the Sunlight.The light should automatically turn off and the Charging indicator (See position Below) will flash regularly. This means the Solar panels is charging the batteries correctly.
- (Please use arrows on connector to align correctly)
- Fix the product on the wall with supplied wall bolts.The installation height is suggested to be between 3-6 meters.
- Please make sure the Solar panels are installed at the correct Angle for your Country and in the correct direction for your Hemisphere. Also ensure that the sunlight to them is not blocked by obstacles such as trees,shadows,buildings etc. The panel needs unobstructed sunlight to charge correctly.
Tips:
- Installation direction of the solar panel is 5-10 degrees south to west, an angle of 35 degrees with the horizontal place.
- Please also ensure that the panel is affixed firmly to a permanent structure so it is not affected by winds or movement.
- Please use the supplied remote to select your required brightness and duration time of the light to your desired requirements. (Reserved keys on the remote are for use with other models.)
REMOTE CONTROLLER INSTRUCTIONS
Light-operated Mode.
Once the waterpoof Wiring Connector is connected and tightened, by pressing
the [AUTO] key,the light will automatically turn on when darkness falls,and
will turn off to charge once the sun rises.
Remote Controller Functions:
Please Note: You can only choose one function at a time on the controller. The Timed Function starts once you press 3H/5H/8H and can not be set manually.
IMPORTANT NOTIFICATION
- Please never connect 240VAC to this unit as it will damage the lamp and very likely cause personal injury or electric shock.
- Please ensure the Installation is affixed firmly to solid/permanent fixture so as to avoid it falling & causing injury.
- Disassembling the Lamp,Panel or any of its parts will void the warranty immediately.
- Please clean the Solar Panels regularly of Dust,debris and Bird dropping,as this will keep the Panels output at it’s highest efficiency for charging the batteries.
ABOUT COMPANY
- Electus Distribution Pty Ltd
- 46 Eastern Creek Dr,
- Eastern Creek NSW 2766 Australia Ph 1300 738 555
- Int’l +61 2 8832 3200
- Fax 1300 738 500
- www.electusdistribution.com.au
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>