TUNAI Wand Bluetooth Transmitter User Manual
- June 6, 2024
- TUNAI
Table of Contents
TUNAI WAND
BLUETOOTH TRANSMITTER
| www.tunai-creative.com
---|---
| www.facebook.com/tunai.global/
|
www.instagram.com/tunai_creative_eng/
IMPORTANT NOTICE
- DO NOT expose the product under direct sunlight for long hours
- DO NOT disassemble the product, unauthorized disassembly will result in a warranty to expire
- USE ONLY power adapters with 5V output
WARRANTY
TUNAI provides a one-year product warranty, please keep your purchase proof
and package.
The warranty does not cover the following :
- Consumable parts (example: exterior coating damage)
- Appearance damage
- Damage caused by improper use of other products
- Damage caused by failure to comply with instructions
- Purchased from an unauthorized seller
- Unauthorized disassembly of the product
- Damage caused by accident, abuse, improper use, fire, earthquake, or other external causes.
– TUNAI WAND User Manual –
TUNAI WAND OVERVIEW
INPUT PORTS
- USB : Power supply and USB audio input
- AUX : 3.5mm audio input
- SDPIF : Optical audio input
BUTTON
- Short press: Mode change / Wake up
- Long press: Force WAND to enter pairing mode
LED Indicator
LED Color
| White| AUX
---|---|---
| Blue| SPDIF
| Orange| Micro USB
LED Status
| Rapid Flash | Pairing Mode |
|---|---|
| Slow Flash | Available for the previously paired device to connect |
| LED On | Connected |
| LED Off | LED goes off automatically after 5 minutes |
INSTALLATION
- Connect WAND and USB power adapter with the included micro USB cable. LED will flash once powered.
- Connect WAND and the audio source to the input port using the corresponding cable (micro USB and 3.5mm to RCA is included).
PAIRING
ENTER PAIRING MODE
- WAND will enter pairing mode when powered for the first time.
- LED will flash rapidly when entering pairing mode.
- To force re-enter pairing mode, long-press the button for 5 seconds.
PAIRING WITH BLUETOOTH HEADPHONES
- Force both WAND and Bluetooth headphones to enter pairing mode. WAND will enter pairing mode automatically when powered for the first time.
- WAND will be connected with Bluetooth headphones automatically once both enter pairing mode.
- LED indicator stop flashes once paired
AUDIO CODECS
WAND supports aptX for high-quality audio, aptX for low latency, and standard
SBC. To connect with aptX or aptX low latency, Bluetooth headphones will need
to also support these audio CODECs. Otherwise, standard SBC will be used for
the connection.
Connection priority : aptX low latency > aptX > SBC.