BLUSTREAM IP500UHD-TZ Multicast UHD Transceiver User Manual
- June 3, 2024
- BLUSTREAM
Table of Contents
IP500UHD-TZ Multicast UHD Transceiver
User Manual
IP500UHD-TZ Multicast UHD Transceiver
Description
The Blustream IP500UHD-TZ Transceiver is an SDVoE compliant AV over IP
solution that provides the highestquality, uncompromised 4K with zero latency
Audio/Video extension over copper or optical fibre 10G networks.
The IP500UHD-TZ includes support for HDMI 2.0 encompassing distribution of HDR
(High Dynamic Range), 10-bit colour content and multi-channel HD audio
signals. The IP500UHD-TZ provides advanced features including PoE+ and
transmission of multiple control and data signals alongside audio and video,
including IR, RS-232, USB (KVM) and 1Gb Ethernet.
The IP500UHD-TZ is ideal for 18Gbps HDMI installations where multiple
transceivers can be combined with one or more 10GbE copper / fibre switches to
form a distributed video matrix, multi-viewer or video wall system.
Key Features
- Advanced 18Gbps UHD Video over 10Gb network with uncompromised video quality and zero latency
- Supports HDMI 2.0 18Gbps specification with pass-through for up to 4K 60Hz 4:4:4 and 10/12-bit HDR sources, including Dolby Vision LLM (Low Latency) up to 12-bit
- Supports video scaling and single-frame switching
- Supports all known digital HDMI audio formats including Dolby TrueHD, Atmos, DTS-HD Master Audio and DTS:X transmissions
- Support fixed signal routing function for IR, RS-232, CEC and USB
- USB end to end/point to point pass-through
- Analogue L/R audio embedding and audio breakout (balanced and unbalanced)
- Bi-directional 10/100/1000BaseT Ethernet pass-through
- Supports bi-directional 5V or 12V IR pass-through
- PoE (Power over Ethernet) to power Blustream products from PoE+ switch
- HDCP 2.2 compliant with advanced EDID management
- Local 12V 2.5A power supply (should Ethernet switch not support PoE+) (power supply sold seperately)
- Features 4 operational modes:
– Matrix distribution (requires 10Gb network switch)
– Video wall (requires 10Gb network switch)
– Multiview mode (requires 10Gb network switch)
– One-to-one HDMI extender (no network switch required)
Connectivity
- Video Input: 1x HDMI Type A, female
- Video Output: 1x HDMI Type A, female
- Audio Input / Output Connector : 1x 5-Pin Phoenix connector
- Ethernet Port: 1x 10GBaseT RJ45 video network, 1x SFP+ module video network, 1x 1Gb LAN RJ45 pass-through
- RS-232 Serial Port: 1x 3-Pin Phoenix connector
- USB / KVM Port: 1x USB-Type B (host) , 2x USB-Type A (device)
- IR Input: 1x 3.5mm stereo jack
- IR Output: 1x 3.5mm mono jack
Specifications
- Operating Temperature: 32°F to 104°F (0°C to 40°C)
- Storage Temperature : -4°F to 140°F (-20°C to 60°C)
- Unit Dimensions (W x D x H): 190mm x 156mm x 25mm (without feet & connections)
- Unit Dimensions (W x D x H): 190mm x 159mm x 29mm(with feet & connections)
- PoE+ draw: 12.8W (typical), 13.5W (max load)
Included Accessories
| IR Accessories | 1 x IRR, 1 x IRE |
|---|---|
| Serial Accessories | 1 x DB9 |
| Rubber Feet | 4 x |
| Rack Mount | 1 x Mounting Kit |
Control
IR
App (via ACM500)
RS-232 (via ACM500)
TCP-IP (via ACM500)
Front Panel Buttons
Regulatory Compliance
Blustream cannot be held responsible for
errors in typography or photography. Specifications are subject to change
without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>