ION Audio IOADVENTURER Weather-Resistant Rechargeable Speaker System User Guide

June 7, 2024
ION Audio

Adventurer Quickstart Guide

For the latest information about this product and product registration, visit ionaudio.com.
For additional product support, visit ionaudio.com/support.

Outdoor Use and Care

Though Adventurer is water-resistant and able to tolerate splashing water, please review the tips below to get the best performance from Adventurer:

  • Adventurers must only be used outdoors with power outlets or extension cords that are rated for outdoor use. Please do not connect the power cable to Adventurer in a
    wet environment. Make sure the power input, power cable, and power outlet are all completely dry before making any connections.

  •  Please do not place Adventurer in standing water, and bring Adventurer indoors during extreme weather.

Rechargeable Batteries

  • Fully charge the battery prior to first use.
  •  Charge the battery completely after each use. It is acceptable to leave Adventurer plugged in; this will not overcharge the battery. The adventurer does not need to be powered on to charge the battery.
  •  The battery icon blinking on the Display means that the battery is charging. When fully charged, all segments of the battery icon will be lit without blinking. When the power cable is disconnected, the battery icon shows the current level of the battery.
  •  For best product longevity, do not store at exceedingly hot (greater than 90°F/32°C) or exceedingly cold (less than 32°F/0°C) temperatures. If you leave the battery level low and do not charge it for 6 months, it may permanently lose capacity.

Main Controls (Front Panel)

ION Audio IOADVENTURER Weather-Resistant
Rechargeable Speaker System

  1. Power Button: This button turns Adventurer on or off.
  2. Bluetooth Button: Press and release the Bluetooth button to pair to a Bluetooth device or disconnect a paired Bluetooth device. See below to learn more.
  3. Light Mode Button: Press this button to select how the lights on the front panel function. See below to learn more.
  4. Radio Selector: This button turns the FM radio on or off.
  5. FM Presets: Press and hold a numeric preset button to assign the currently selected radio station to that preset number. Press and release the numeric preset button to go to the stored radio station.
  6. Bass Boost : Press this button to enhance the overall bass frequency response.
  7.   Tune/Track Buttons : Press and release these buttons to tune in a radio station or go to the previous/next track on a Bluetooth-connected device. To “seek” (jump to the next available radio station), hold either button down for a few seconds.
  8. Play/Pause: Press to play or pause a track from a connected Bluetooth device.
  9. Link: Press and hold this button to start stereo linking to another Adventurer speaker. See below to learn more.
  10. Display: This screen shows information relevant to Adventurer’s current operation.
  11. Volume Control: Press this knob to toggle between controlling the music volume and controlling the microphone volume. Turn the knob to increase or decrease the volume.
  12. Microphone Input: This mono input accepts a 1/4” (6.35 mm) input such as a microphone, guitar, or another musical instrument.
  13. Auxiliary Input: This stereo 1/8” (3.5 mm) input can be used to connect a CD player, MP3 player, or another audio source.
  14. USB Charging Port: Connect your device’s charge cable here to charge it. USB charging-only functions when the unit’s power is turned on.

Light Modes

Press the Light Mode button to toggle between three modes for the lights on the front panel:

  •  Color Cycle: the lights slowly glow and cycle through colors; press and hold the Light Mode button to freeze the lights on one color.
  •  Beat Sync: the lights react to the beat of the music.
  • Off: the lights turn off.

Pairing with a Bluetooth Device

  1. Make sure the speaker is within range of your Bluetooth device (no more than 100 ft. / 30.5 m away).
  2. Press and release the Bluetooth button on the speaker.
  3. Navigate to your Bluetooth device’s setup screen. Then find and select Adventurer. If your Bluetooth device prompts for a pairing code, enter 0000.

Note: If you have previously connected to your Bluetooth device, Adventurer will reconnect automatically.
Tip: Press and hold the Bluetooth button to enable or disable the Bluetooth pairing voice prompts.
To disconnect a paired Bluetooth device, press and release the Bluetooth button.

Stereo Linking Two Speakers

  1. Make sure the speakers are within range (no more than 50 ft. / 15.2 m away).
  2. Press and hold the Link button on each speaker to enter Stereo Link mode. Once the link has been established, LINK should appear on the Display.
  3. Select which unit will be the primary speaker by pressing and releasing its Bluetooth button. Use this speaker for pairing with a Bluetooth device or selecting a radio station. The primary speaker will play left channel audio, and the secondary speaker will play right channel audio.

To disconnect the link between the two speakers, double-press the Link button.

App Control

IMPORTANT: To ensure the best possible experience with the app, use the most current Android OS or iOS on your device.
Note: Ensure that your device has internet access via your service provider or wireless connection. You can also download the app on your computer, but remember to connect and sync your device to transfer the app.

Follow these steps to download the free app on your device:

  1.  Open the Apple App Store or Google Play on your device. Then Search for the ION Sound XP app.
  2.  Follow the on-screen instructions to download and install the app. Once downloaded, the ION Sound XP app will appear on your device’s home screen.

Technical Specifications

Output Power : 100 W (peak)
Frequency Response: 44 Hz–18 kHz (±3 dB)

Drivers: Low-Frequency : 8.0” / 203 mm woofer; HighFrequency: 3.0” / 76 mm tweeter
Microphone Type: Dynamic microphone

Radio Frequency Range (US) : 87.5–107.9 MHz (FM)
USB Charging Port: +5 V, 1 A
Water Resistance Class: IPX5

Battery: Life: Up to 50 hours;
Charge Time: 10 hours; Type: 12 V, 5.0 Ah, SLA
Power: Connection: IEC; Input
Voltage: 100–240 VAC, 50/60 Hz

Dimensions (width x depth x height): 14.5” x 10.2” x 17.7” / 369.2 x 258.2 x 450 mm
Weight: 24.8 lbs. / 11.23 kg

Safety & Warranty Information

Product Warranty
(for products purchased in the U.S.A.)

  1. What is covered and for how long?
    All Products: ION Audio, LLC (“ION Audio”) warrants to the original purchaser that ION Audio products and all other accessories are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase from an authorized ION Audio dealer and continuing for the following period of time after that date for ninety (90) days. ION Audio warrants factory-refurbished merchandise to be free of material and operational defects for a period of ninety (90) days from the original date of retail sale. This refurbished merchandise warranty is not transferable.

  2.  What is not covered? This Limited Warranty is conditioned upon proper use of the product by the purchaser. This Limited Warranty does not cover: (a) damage caused by improper installation or improper connection to any peripheral; (b) damage caused by an external electrical fault; (c) damage from use of parts not manufactured or sold by ION Audio; (d) product purchased from anyone other than an ION Audio authorized dealer; (e) modifications to the product not approved in writing by ION Audio; (f)   equipment that has the serial number removed or made illegible; (g) normal cosmetic and mechanical wear; (h) damage or loss during transit to an Authorized ION Audio Repair Center; or (i) units that are purchased and/or located outside of the continental USA.

  3. What are ION Audio’s obligations? During the applicable warranty period, ION Audio will repair or replace, at ION Audio’s sole option, without charge to the purchaser, any defective component part of the product. To obtain service under this Limited Warranty, the purchaser must first contact ION Audio and obtain a return merchant authorization (“RMA”) number. Purchaser must then return the product to ION Audio in an adequate container for shipping, accompanied by purchaser’s sales receipt or comparable proof of sale showing the date of purchase, the serial number of the product, and the seller’s name and address. To obtain an RMA number and assistance on where to return the product, contact ION Audio customer service at 401-658-3743. Upon receipt, ION Audio will repair or replace the defective products. ION Audio may, at ION  Audio’s sole option, use rebuilt, reconditioned, or new parts or components when repairing any product or replace a product with a rebuilt, reconditioned, new or comparable product. Repaired products will be warranted for a period equal to the remainder of the original Limited Warranty on the original product or for 90 days, whichever is longer. All replaced parts, components, boards, and equipment become the property of ION Audio. If ION Audio determines that any product is not covered by this Limited Warranty, the purchaser must pay all parts, shipping, and labor charges for the repair or return of such product.

  4. What are the limits on ION Audio’s liabilities? THE WARRANTIES GIVEN IN THIS LIMITED WARRANTY, TOGETHER WITH ANY IMPLIED WARRANTIES COVERING ION AUDIO PRODUCTS, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A  PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ION AUDIO SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES, LOSS OF PROFITS, DAMAGES TO PURCHASER’S PROPERTY, OR INJURY TO PURCHASER OR OTHERS ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE ANY ION AUDIO PRODUCT, BREACH OF WARRANTY, OR NEGLIGENCE, INCLUDING BUT NOT LIMITED TO ION AUDIO’S OWN NEGLIGENCE, EVEN IF ION AUDIO OR THEIR AGENTS HAVE BEEN ADVISED OF SUCH DAMAGES, OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. THIS LIMITED WARRANTY IS THE COMPLETE WARRANTY FOR ION AUDIO PRODUCTS AND IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES THE PURCHASER’S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR UNENFORCEABLE SHALL NOT AFFECT THE ENFORCEABILITY OF THE REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS.
    This Limited Warranty allocates the risk of product failure between the purchaser and ION Audio, and ION Audio’s product pricing reflects this allocation of risk and the limitations of liability contained in this Limited Warranty. The agents, employees, distributors, and dealers of ION Audio are not authorized to make modifications to this Limited Warranty or make additional warranties binding on ION Audio. Accordingly, additional statements such as dealer advertising or presentation, whether oral or written, do not constitute warranties by ION Audio and should not be relied upon.

  5.  How does state law apply to this warranty? SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO THE PURCHASER.

This Limited Warranty gives you specific legal rights. You may also have other rights, which vary from one jurisdiction to another.

Please record the serial number of your unit as shown on the back of the chassis as well as the name of the dealer from whom you purchased the unit. Retain this information and your original purchase receipt for your records. Go to our website ionaudio.com to register your product with us.

Model:
Purchased From:
Serial Number:
Date of Purchase:

For warranty information for products purchased outside the U.S.A, visit: ionaudio.com/warranty

Return Information

• A return merchant authorization number must be obtained from your local ION Audio representative. For your representative go to ionaudio.com.
• A copy of the original sales receipt must also be included for the equipment to be repaired under warranty.
• The faulty equipment must be packed in its original packaging.
• One additional outer layer of the packaging must be included to ensure product safety. Failure to do so may inadequately protect the equipment in transit and therefore jeopardize the warranty.
• ION Audio will not accept COD shipments and no call tags will be issued for the merchandise return.
• ION Audio will not return repaired merchandise to customers by priority service except by written request at the customer’s cost. Requests must be submitted in writing with the returned merchandise.
• The defective ION Audio equipment should be sent freight prepaid with the return merchant
authorization number printed clearly on the outer packaging and original sales receipt enclosed to your
local service center.
ION Audio is a trademark of ION Audio, LLC, registered in the U.S. and other countries.
World Headquarters: inMusic Brands, Inc. / 200 Scenic View Drive / Cumberland, RI 02864 / USA / Tel: 401-658-5766 / Fax: 401-658-3640

Important Safety Instructions

  1. Read and keep these instructions. Heed all warnings and follow all instructions.

  2. Water and Moisture (if applicable): This product should be kept away from direct contact with liquids.
    The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

  3. Do not block any ventilation openings (if applicable). Install in accordance with the manufacturer’s instructions. Do not install this equipment in a confined or “boxed-in” space such as a bookcase or similar unit, and maintain good ventilation conditions. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, tablecloths, curtains, etc.

  4. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not place exposed flame sources such as lighted candles on the apparatus.

  5. Do not defeat the safety purpose of the polarized or grounding-type plug (if applicable). A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.

  6. (If applicable) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. When moving or not using the appliance, secure the power cord (e.g., wrap it with a cable tie). Be careful not to damage the power cord. Before using it again, make sure the power cord has not been damaged. If the power cord has been damaged at all, bring the unit and cord to a qualified service technician for repair or replacement as specified by the manufacturer.

  7. Use only the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus (if applicable). When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

  8.  Unplug this apparatus during lightning storms or when unused for long periods of time.

  9.  Power Sources (if applicable): This product should be connected to a power supply only of the type described in these operating instructions, or as marked on the unit.

  10. Protective earthing terminal (if applicable): The apparatus should be connected to a mains socket outlet with a protective earthing connection.

  11. For Class II apparatus only (if applicable): This symbol means the equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safe connection to the electrical earth.

  12.  Class II Wiring (if applicable): To reduce the risk of electric shock, the external wiring connected to the terminals with “Class II Wiring” requires Class II wiring installed by an instructed person or the use of readymade leads or cords.

  13.  This apparatus is for professional use only. Intended operational climate: moderate.

  14. Warning (if applicable): Excessive sound pressure (high volumes) from headphones can cause hearing loss.

  15. Warning (if applicable): Please refer to any important information (e.g., electrical, safety, etc.) printed on the exterior bottom enclosure or rear panel before installing or operating the product.

  16.   Warning (if applicable): Terminals marked with the lightning bolt symbol may be of sufficient magnitude to constitute a risk of electric shock.

  17. As an electrical appliance, this device must be turned on and checked after a long period of non-use for maintenance purposes.

Safety Notices


CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE ANY COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER  SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.

DANGEROUS VOLTAGE: The lightning flash with the arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

INSTRUCTIONS: The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying this appliance.

WARNING: To reduce the risk of fire or electrical shock, do not expose this appliance to rain or moisture. Electrical equipment should NEVER be kept or stored in damp environments.
CAUTION (for U.S.A. & CANADIAN models only): TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
NOTICE CONCERNING FCC REGULATIONS: You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (a) reorient or relocate the receiving antenna; (b) move this unit; (c) increase the separation between the equipment and receiver; (d) connect the equipment into an outlet on a circuit different from that to which the receiver is connected; (e) be sure that all cables are properly shielded, using a choke or ferrite where appropriate; (f) consult the dealer or an experienced radio/television technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
RF Warning Statement: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Warning: Do not ingest the battery—chemical burn hazard. The remote control supplied with this product contains a coin/button-cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Manual v1.0

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

ION Audio User Manuals

Related Manuals