Mi Smart LED Bulb User Manual
- June 6, 2024
- Mi
Table of Contents
Mi Smart LED Bulb
Read this manual carefully before use, and retain it for future reference.
Installation Steps
Install the Light Bulb
Install the light bulb into the fitting that it is compatible with.
Notes:
- Make sure that the power is off when installing, removing or examining the light bulb.
- Do not use this product in a lamp with a dimmer (e.g. a desk lamp with a round dimmer switch) to avoid damaging the product.
- Do not use this product in a damp environment.
- Do not use the light bulb in a narrow and ill-ventilated lamp shade as it may cause weak signals or heat dissipation issues.
Connect with Mi Home / Xiaomi Home App|
This product works with Mi Home / Xiaomi Home app*. Control your device and
interact it and other smart home devices with Mi Home / Xiaomi Home app.
Scan the QR code to download and install the app. You will be directed to the
connection setup page if the app is installed already. Or search „Mi Home /
Xiaomi Home“ in the app Store to download and install it.
Open Mi Home / Xiaomi Home app, tap „+“ on the upper right and then follow
prompts to add your device.
The app is reffered to as Xiaomi Home app in Europe (except for Russia). The
name of the app displayed on your device should be taken as the default.
Note: The version of the app might have been updated, please follow the instructions based on the current app version.
Link a Mi Device with Google Assistant
Add the Mi Home / Xiaomi Home service to the Google Assistant app to
control devices connected to Mi Home / Xiaomi Hime from Google Assistant.
- Tap in the Google Assistant app, search for „Mi Home / Xiaomi Home“, tap „Link“ and sign in with your Xiaomi account.
- Tap in Setting > Home Control to add a device, and follow the on-screen instructions.
Once the accounts are linked, you can control the Mi device from Google Assistant.
Link a Mi Device with Amazon Alexa
Add the Mi Home / Xiaomi Home skill to the Amazon Alexa app, to control
devices connected to Mi Home / Xiaomi Home from Amazon Alexa.
- Tap in the Amazon Alexa app, then tap „Skills & Games“, search for „Mi Home / Xiaomi Home“, select the correct skill and tap „Enable“. Then sign in with your Xiaomi account.
- After successfully linking the accounts, tap DISCOVER DEVICES to add the device, and follow the on-screen instructions. Once the accounts are linked, you can control the Mi device from Amazon Alexa.
Note: The name (Mi Home or Xiaomi Home) varies by selected language or regions.
How to Restore to Factory Settings
Use the switch to consecutively turn the light bulb on and off five times,
respectively. Make sure you wait for two seconds on each turn.
When the light bulb slowly blinks for five seconds and then restarts, it is
successfully restored to factory settings.
Note: When you connect the light bulb to a new network, please restore it
to factory settings first.
Product Features
Warning
-
Before using this product, please make sure that your voltage is appropriate for this product‘s working voltage.
Using this product with a voltage other than the one specified may damage the product and cause safety hazards. -
Do not disassemble this product, as the light diodes can cause damage to the eyes.
-
The light bulb will heat up when working. Do not use it in a confined holder for an extended period of time. Ensure sufficient ventilation for the light bulb to allow for heat dissipation.
-
For indoor use only.
-
Disconnect power before installation to prevent risk of electric shock.
-
Do not use where directly exposed to water.
-
For lamps with a weight significantly higher than that of the lamps for which they are a replacement, attention should be drawn to the fact that the increased weight may reduce the mechanical stability of certain luminaires and lampholders and may impair contact making and lamp retention.
EU Declaration of Conformity
Hereby, Qingdao Yeelink Information Technology Co., Ltd., declares that the
radio equipment type XMBGDP01YLK is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address:
http://www.mi.com/global/-service/support/declaration.html
WEEE Disposal and Recycling
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
Specifications
Model: XMBGDP01YLK
Lamp Fitting: E27
Rated Power: 8 W
Luminous Flux: 810 lm
Rated Input: 220–240 V ~ 50/60 Hz 0,04 A
Color Temperature: 2 700 K
Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n 2,4 GHz
Service Life: Approx. 25 000 h
Operating Temperature: -10°C to 40°C
Operating Humidity: 0–85 % RH
Operating Frequency: 2 412–2 472 MHz
Maximum Output Power: 15,31 dBm
Dimensions: Ø 60 × 116 mm
Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Qingdao Yeelink Information Technology Co., Ltd. (a Mi
Ecosystem company)
Address: 10F-B4, Building B, Qingdao International Innovation Park, No. 1
Keyuan Weiyi Road, Laoshan District Qingdao City, Shandong Province, P.R.China
For further information, please go to www.mi.com
Importer:
Beryko s.r.o.
Na Roudné 1162/76, 301 00 Plzeň
www.beryko.cz
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>