Kraus Geo Axis Single Handle Pull Out Kitchen Faucet KPF-1750 Installation Guide

June 6, 2024
Kraus

Kraus Geo Axis Single Handle Pull Out Kitchen Faucet KPF-1750 Installation

GuideKraus Geo Axis Single Handle Pull Out Kitchen Faucet
KPF-1750

KPF-1750

Congratulations on the purchase of your new Kraus plumbing fixture!
Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product:

Stop-Icon.pngDO NOT RETURN TO STORE

Please contact our Customer Service Team
1-800-775-0703 / customerservice@kraususa.com
Have the model number available, and retain a copy of your receipt with purchase date for reference.

If for any reason this product does not meet your expectations, please be sure to repack this product in the original box and packaging material to avoid damage during transit.

Prior to Installation

Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement.

Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove existing faucet. Clean sink or countertop to remove any debris, plumber’s putty, or silicone.

Place bucket under angle stops.

Turn on to flush any debris prior to installing new plumbing. Shut off angle stops.

Pre-drilled hole size requirement: 1 3/8″ (min) – 1 1/2″ (max) Max countertop thickness without deck plate: 3”

Max countertop thickness with deck plate: 2 5/8”

1 or 3 hole installation

Tools You Will Need

FIG 1 Tools You Will Need

Diagram and Parts List

FIG 2 Diagram and Parts List

  1. Spray Head
  2. Faucet Body
  3. Base O-Ring
  4. Deck Plate
  5. Base Plate
  6. Rubber Washer
  7. Metal Washer
  8. Mounting Nut
  9. Mounting Screws
  10. Weight
  11. Spray Hose

Faucet Dimensions

FIG 3 Faucet Dimensions

FIG 4 Faucet Dimensions

Installer Tip

Shut off main water supply before installing new faucet

Step 1. Remove mounting hardware

FIG 5 Remove mounting hardware

Before installation, remove the mounting screws
(9), mounting nut (8), metal washer (7), and
rubber washer (6) from the mounting pipe.

Step 2A. Install the faucet assembly (with deckplate)

FIG 6 Install the faucet assembly

For three-hole installation, deck plate (4), base
plate (5), and silicone sealant are required.

NOTE: Skip this step if installing without
deckplate.

Step 2B. Install the faucet assembly (without deckplate)

FIG 7 Install the faucet assembly

For single-hole installation, deck plate (4), base plate (5), and silicone sealant are NOT required.

Step 3. Install the faucet and mounting

FIG 8 Install the faucet and mounting

Insert the faucet body (2) into the hole on the countertop or deck plate (4) with base O-ring (3) attached. Install rubber washer (6), metal washer (7), mounting nut (8), and mounting screws (9) from underneath the countertop.

Step 4. Secure mounting hardware

FIG 9 Secure mounting hardware

Adjust the direction of the faucet body (2). Tighten the mounting nut (8) until snug. Tighten the mounting screws (9) to the nut with a Phillips head screw driver.

Step 5. Attach spray hose and counterweight

FIG 10 Attach spray hose and counterweight

Connect the spray hose (11) to the supply hose. Tighten with wrench until snug. Install the weight (10) on the indicated mark on the spray hose (11).

Step 6. Connect waterlines

FIG 11 Connect waterlines

Connect the hot & cold water lines to the angle stops. Tighten with a wrench until snug. Turn on the hot & cold angle stops.

NOTE: Please make sure filter washers are installed before connecting to the main valve.

Step 7. Flush spray hose

FIG 12 Flush spray hose

Remove the spray head (1) from the spray hose (11). Hold the tip of the spray hose (11). Turn the faucet on and let the water run for 60 seconds to flush any debris.

Step 8. Attach spray head

FIG 13 Attach spray head

Screw the spray head (1) to the spray hose (11) until snug.

Step 9. Check spray head

FIG 14 Check spray head

Turn the faucet on. Press the button to check if the spray head (1) switches modes properly.

Replacement Parts

FIG 15 Replacement Parts

FIG 16 Replacement Parts

FIG 17 Replacement Parts List

FIG 18 Replacement Parts List

*Denotes faucet component color options

Trouble-Shooting

If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps:

FIG 19 Trouble-Shooting

FIG 20 Trouble-Shooting

FIG 21 Trouble-Shooting

FIG 22 Trouble-Shooting

Care & Maintenance

To keep the product clean & shining, follow the steps below.

FIG 23 Care & Maintenance

  1. Rinse with clean water & dry with a soft cloth
  2. Do not clean with soaps, acid, polish, abrasives, or harsh cleaners
  3. Do not use cloth with a coarse surface
  4. Unscrew the aerator and clean when necessary

*This installation manual is subject to change without further notice.

Codes/Standards Applicable:

FIG 24 Standards Applicable

Faucet Warranty

  • Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”).

  • Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non-transferable.

  • Kraus warrants the structure and finish of the product to be free from defects in material and workmanship under normal usage for the lifetime of the product.

  • The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the lifetime of the
    original owner or end-user.

  • Kraus warrants the mechanical components such as but not limited to sprayhead assembly (includes engine, aerators, structure, restrictors, back flow preventers, sprayer hoses, braided supply line hoses which encompasses nylon, silicon and stainless steel,etc) of the product to be free from defects in material and workmanship under normal usage for a period of one (1) year. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the one (1) year term of the original owner or end-user.

  • Kraus warrants the mechanical component (cartridge) of the product to be free from defects in material and workmanship under normal usage for a period of five (5) years. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the five (5) year term of the original owner or end-user.

  • Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of Kraus. This warranty extends to the original owner or end-user, and is not transferable to a subsequent owner.

Restrictions

This warranty does not cover antediluvian, discontinued, or display products, whether such items are purchased at discount outlets, unauthorized dealers, and/or sold on clearance.

This warranty does not cover instances of negligence, misuse, abuse, improper installation, carelessness, accident, hard water or mineral deposits, exposure to corrosive materials, misapplication, damages caused by improper maintenance, alteration of the product, or failure to follow care or installation instructions enclosed with your product. Avoid using abrasive cleaners such as powders, bleach, ammonia, alcohol, or chlorine. Avoid using abrasive pads, steel wool, or wire brushes, as these will damage and wear down the finish.

This warranty does not apply to Products that have not been installed or operated in accordance with instructions supplied by Kraus and all applicable rules, regulations, and legislation pertaining to such installations.

This warranty does not apply unless the Kraus product is installed by a fully insured and licensed trade professional. Kraus insists that such professionals have experience in the installation of bathroom and kitchen manufactured goods.

This warranty does not cover labor charges or costs of removal and reinstallation of said product. This warranty does not allow recovery of incidental or consequential damages, such as loss of use, delay, property damage, or other consequential damages, and Kraus accepts no liability for such damages.

This warranty does not cover Marine or Outdoor Installation.

Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose, or compliance with any code.

Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply).

International shipping fees are not included.

Commercial Warranty

Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use.

All incidental or consequential damages are specifically excluded. No additional warranties, express or implied, are given, including but not limited to any implied warranty of merchantability or fitness for a particular purpose.

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

KRAUS USA has the right to change, modify, and/or update the warranty policy at any time. For the latest, most up to date comprehensive warranty, go to www.kraususa.com/warranty

If you are a homeowner please contact a Kraus Customer Service Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
Toll-free 800-775-0703
Customerservice@kraususa.com

If you are a plumbing contractor or trade professional please contact a Kraus Pro Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8955
Proservice@kraususa.com

If you are an Authorized Partner please contact a Partner Support Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8954
Partnersupport@kraususa.com

In requesting warranty service, please be ready to provide:

  1. Proof of purchase.
  2. A description of the problem.

Download the Kraus Care & Maintenance Guide at

http://www.kraususa.com/maintenance

IMPORTANT

Register Your Kraus Product
Activate Your Warranty
Access Premium Customer Support
Get Product Information

REGISTER TODAY
http://www.kraususa.com/registration

FIG 25 Social Media

Read More About This Manual & Download PDF:

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals