Cabela s 4BGGBP Home Defense Safe with Biometric Lock Instruction Manual

Cabela s 4BGGBP Home Defense Safe with Biometric Lock Instruction Manual

IMPORTANT NOTICES

1. Do not leave safe unattended while open.
2. Keep Children Away from safe.
3. Keep your safe locked and closed at all times when not in use,to avoid children being accidently locked in safe.
4. Place your safe in a cool and dry location.
5. Remember to record the serial number of your safe from the tag on the back of your safe. You will need this serial number for all warranty or customer service inquiries.
6. Electronic media, photographic media and all audio-visual media should not be stored in the safe for re protection. These materials will not survive the rated internal temperature of the safe and may be damaged or destroyed.

Safe must be secured as detailed in these instructions. A child or Adult can tip the safe and can be killed or seriously injured. Failure to secure the safe can result in death or serious injury.

BATTERY INSTALLATION AND REPLACEMENT

You must rst install the batteries which are located in the front protective styrofoam.
Batteriesincluded: 4 AAA batteries
To replace the batteries,remove the cover by pressing the tab and turning asshown in the illustration (counterclockwise).
Install new battery and align cover and installcover (clockwise).
NOTE: Press the scanner with a recorded fingerprint. If the green and red indicator lights cflash together, it indicates low battery. Please replace with 4 new AAA alkaline batteries.

OPENING THE SAFE

3. Place the same finger on the scanner for a second time, holding the finger in the same position until there is 1 beep and the green light flashes once. Lift your finger off the scanner.
4. Place the same finger on the scanner for a third time, holding the finger in the same position until there is 2 beeps and the green light flashes twice. Lift your finger off the scanner. Your fingerprint is now recorded.
5. If the red light flashes 3 times with 3 beeps, your fingerprint did not get recorded and you will have to start over.

BACK UP KEY

Remove the cover by pressing the tab and turning the cover under battery installation. Insert the key in the key hole and turn key ¼ turn (until stopped) to unlock the safe. Rotate the handle and open the door.

UNLOCKING THE SAFE

1. Place a recorded finger on the scanner. The green light flashes once with 1 beep. The white light will come on and the scan will begin.

2. If the green light flashes twice with 2 beeps, the scan has been accepted and you
   will have 5 seconds to turn the handle to open the door.

3. If the red light flashes once, the scanner did not read your fingerprint and you must
   try again. If the red light flashes 3 times, the scanner read your fingerprint and did not accept it.

NOTE: If 3 invalid fingerprint attempts are made in succession, the red light will flash 5 times with 5 beeps. And you will have an automatic lockout for 60 seconds before you can try a scan again.

If 1 more invalid fingerprint attempt is made, the red light will flash 5 times with 5 beeps. And you will have an automatic lockout for 5 minutes before you can try a scan again.

There will be 1 beep with the green light flashing once. This means the lockout period is over.

LOCKING THE SAFE

To lock the safe, close the door and turn the handle to the lock position.

NOTE: Because the locking mechanism is deactivated for approximately 3 to 6 seconds after the fingerprint is entered, wait a minimum of 6 seconds from the time your fingerprint has been accepted to lock the safe.

WARNING: Do not leave safe unattended while open, and keep children away from safe.

CLEARING THE MEMORY

Press the reset button and hold for about 5 seconds until the green light flashes 10 times with 10 beeps. It means the memory of all recorded fingerprints has been cleared.

TURNING THE SOUND OFF/ON

Your safe comes with the beep sound turned on.

To turn the sound off, press the scanner with a recorded fingerprint for 10 seconds until the green light flashes twice.

To turn the sound on, press the scanner with a recorded fingerprint until you hear 2 beeps and the green light flashes twice.

SECURING THE SAFE

This safe must be mounted to the oor. Failure to do so will compromise the safety, security and warranty of the safe. Place your safe in a cool and dry location.

HARDWARE INCLUDED

TOOLS REQUIRED

As all installation may vary, please contact your local Hardware Professional for additional installation recommendations.

WARRANTY

We are proud to stand behind our products with a Limited Lifetime Warranty.

LIMITED LIFETIME WARRANTY

Heritage Security Products warrants that each new safe will be free from defects in material and workmanship. Heritage Security Products will repair or replace at no cost to the warranted party, any warranted safe that is damaged during a fire, water (where applicable) in which the water level does not exceed 24 inches for a period of 72 hours, break-in or break-in attempt during the lifetime of the original purchase if the homeowner’s insurance policy will not cover the damage. It does not include water damage that might occur in conjunction with a fire. The lifetime warranty does not include the lock or painted surface.

LOCK AND PAINTED SURFACE WARRANTY

Heritage Security Products takes seriously its obligation to stand behind its product with this warranty as long as the safe is properly installed and cared for as instructed in the Owner’s Instruction Manual. The warranty does not apply to safes or parts that have been misused, neglected or subjected to unusual or extreme conditions and/or environments, or to unreasonable wear and tear. Changing or modifying the safe in ways that affect its intended use will void this warranty. The safe must be registered within 60 days of the purchase and must be on file at the time of the incident.

As a special service to you, the limited lifetime warranty can be transferred, for a fee, to subsequent purchasers or owners with the prior written consent from Heritage Security Products. Simply contact our Customer Service team with your request. Heritage Security Products reserves the right to deny a request or transfer for any reason.

Limitation of Remedies: In no case shall Heritage Security Products be liable for any special, incidental, or consequential damages based upon breach of warranty, breach of contract, negligence, strict tort, or any other legal theory. Such damages include, but are not limited to, loss of profits, loss of savings or revenue, loss of the contents of the safe or vault door, loss of use of the safe or vault door, or any associated equipment, cost of capital, cost of any substitute equipment, facilities or services, downtime, the claims of third parties including customers, and injury to property.

Heritage Security Products provides this warranty in place of all other warranties and assurances whether expressed or implied. Heritage Security Products accepts no liability for incidental or consequential damage or loss by anyone as a result of using this safe.

This warranty is only applicable to the Safe itself and does not extend to the contents of the Safe. For optimal security and protection, safes should be bolted to the floor. Please refer to your Instruction Sheet for details on anchoring your safe to the floor.

For Customer Service needs,please contact us at:

1-888-577-9823
Fax:1-585-486-1198
Email:[email protected]

KEY REPLACEMENT SERVICE

Upon Veri cation of ownership,replacement keys are available for purchase through customer service. Contact Customer Service for more information.

Remember to record the serial number of your safe from the tag on the back of your safe.You will need this serial number for all warranty or customer service inquiries.

www.P65Warnings.ca.gov

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>