gofanco 4K HDMI 1.4 Audio Extraction User Guide

gofanco 4K HDMI 1.4 Audio Extraction

Thank you for purchasing from gofanco. Our products aim to meet all your connectivity needs wherever you go. For optimum performance and safety, please read the instructions carefully and keep this User’s Guide for future reference. If you need more information about our products, please visit www.gofanco.com. For technical support, please email us at support@gofanco.com. For drivers/manuals download, please go to www.gofanco.com/downloads.

Important Safety Notices

Please read safety instructions carefully before installation and operation.

• Please pay close attention to all warnings and hints for this device.
• Do not expose this unit to rain, heavy moisture, or liquid.
• Do not repair the device or open the enclosure without professional guidance to avoid electric shocks. Doing so may void your warranty.
• Keep the product in a well-ventilated location to avoid damage from overheating.
• Shut off power and make sure environment is safe before installation.
• Do not plug the HDMI cables in/out when the device is in use to avoid cable damage. Make sure they are plugged into the correct ports.
• Use the included power adapter only. Make sure the specification matches if using 3rd-party DC power adapter.

Introduction

The 4K HDMI 1.4 Audio Extraction is designed to extract audio from a 4K HDMI signal to stereo balanced L/R audio, analog RCA, and coaxial digital audio output ports.

Features

• Supports up to 4K (4096×2160) @30Hz
• Features simultaneous audio extraction to digital Toslink and Coaxial, and analog stereo
• Supports DTS-HD/Dolby TrueHD/DTS/Dolby-AC3/DSD
• Maximum 300MHz bandwidth and 3Gbps baud rate
• 4 EDID options

Package Contents

• 4K HDMI 1.4 Audio Extraction
• Micro USB power cable (5V/ 1A)
• User’s guide

Installation Requirements

1. HDMI source device (computer, Blu-Ray/DVD player, XBOX, PS3, etc)
2. HDMI display device (SDTV/Monitor, HDTV/Monitor, projector, etc.)
3. Speakers, audio amplifier
4. 5V/1A output USB Power adapter

Product Layout

1. Stereo output jack: Connects to headphones or speakers
2. EDID: Dip switches to control EDID settings
3. HDMI In: Connects to your HDMI source device
4. Micro USB power jack: Connects to the included Micro USB power cable
5. HDMI Out: Connects to your HDMI display
6. Coaxial Out: Connects to your Coaxial speakers or audio receiver
7. Optical Out: Connects to your Optical speakers or audio receiver

Hardware Installation

1. Power off all devices including your HDMI source and HDMI display.
2. Connect your HDMI source device to the Audio Extractor’s HDMI In connector with an HDMI cable (HDMI cable not included).
3. Connect your HDMI display to the HDMI Out connector with a HDMI cable (HDMI cable not included).
4. Optional: Connect headphones, speakers, or amplifier to the audio output jacks as needed.
5. Plug the included Micro USB power cable into the Extractor’s Micro USB power jack, then plug the cable’s other end into a reliable 5V/1A USB Type-A power source.
6. Power on all connected devices.
7. The audio extractor is ready for use.

DIP Switch Settings

Specifications

HDMI Cable

| Input: 8 meters

Output: 8 meters

Power Adapter| Input: 100-240VAC/50-60Hz

Output: 5VDC/1A

Operating Temperature| -15 to 45 degrees C
Dimensions| 62 x 59 x 19 (mm)
Weight| 48.5g

Disclaimer
The product name and brand name may be registered trademarks of related manufacturers.
TM and ® may be omitted on the user’s guide.
The pictures on the user’s guide are just for reference, and there may be some slight differences with the actual products.
We reserve the right to make changes without prior notice to a product or system described herein to improve reliability, function, or design.

www.gofanco.com

References

• gofanco® | Professional & Residential AV/IT Solutions
• gofanco® | Professional & Residential AV/IT Solutions

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>