COMMSCOPE TDUX-35-INT TDUX Inflatable Cable Duct Seal User Guide

COMMSCOPE TDUX-35-INT TDUX Inflatable Cable Duct Seal

TDUX – Inflatable Duct Seal, size 35

• Flexible and reliable wraparound inflatable sealing system for cables
• Fast and easy to install or remove, even when water is flowing out of the duct Independent of duct or cable ovality
• Water and airtight up to 50 kPa (7 psi)
• Environmentaly friendly, non-toxic and resistant to chemicals

Product Classification

• Regional Availability: EMEA
• Product Type: Cable duct seal
• Product Series: TDUX
• Ordering Note: When sealing more than two cables in a duct, seperate orderable TDUX-CL clips are to be used

Dimensions

Width: 120 mm   |   4.724 in
Length: 155 mm   |   6.102 in
Cable Diameter, maximum: 25 mm   |   0.984 in
Cable Diameter, minimum: 12 mm   |   0.472 in
Conduit Inner Diameter, maximum: 35 mm   |   1.378 in
Conduit Inner Diameter, minimum: 25 mm   |   0.984 in

Dimension Drawing

258512-000 | TDUX-35-INT

Environmental Specifications

Installation temperature: -5 °C to +40 °C (+23 °F to +104 °F)

Packaging and Weights

Included: Inflatable bladder with sealing mechanism
Packaging quantity: 10

Regulatory Compliance/Certifications

Agency                Classification

• CHINA-ROHS: Below maximum concentration value
• REACH-SVHC: Compliant as per SVHC revision on www.commscope.com/ProductCompliance
• ROHS: Compliant

©2022 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: October 3, 2021

References

• Product Compliance

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>