EZVIZ DB2 Pro 5mp Battery-Powered Video Doorbell Kit Grey Instruction Manual
- June 9, 2024
- ezviz
Table of Contents
EZVIZ DB2 Pro 5mp Battery-Powered Video Doorbell Kit Grey
COPYRIGHT
© Hangzhou EZVIZ Software Co., Ltd.. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou EZVIZ Software Co., Ltd. (hereinafter referred to as “EZVIZ”). This user manual (hereinafter referred to as “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of EZVIZ. Unless otherwise stipulated, EZVIZ does not make any warranties, guarantees or representations, express or implied, regarding to the Manual.
About this Manual
The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the ™ website (http://www.ezviz. com).
Revision Record
- New release – January, 2021
Trademarks Acknowledgement
™, ™, and other EZVIZ’s trademarks and logos are the properties of EZVIZ in
various jurisdictions. Other trademarks and logos mentioned below are the
properties of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH
ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND
ERRORS, AND EZVIZ MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR
PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL EZVIZ, ITS
DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA
OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF EZVIZ
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. TO THE MAXIMUM EXTENT
PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EZVIZ’S TOTAL LIABILITY FOR ALL
DAMAGES EXCEED THE ORIGINAL PURCHASE PRICE OF THE PRODUCT.
EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE
AS THE RESULT OF PRODUCT INTERRUPTION OR SERVICE TERMINATION CAUSED BY: A)
IMPROPER INSTALLATION OR USAGE OTHER THAN AS REQUESTED; B) THE PROTECTION OF
NATIONAL OR PUBLIC INTERESTS; C) FORCE MAJEURE; D) YOURSELF OR THE THIRD
PARTY, INCLUDING WITHOUT LIMITATION, USING ANY THIRD PARTY’S PRODUCTS,
SOFTWARE, APPLICATIONS, AND AMONG OTHERS. REGARDING TO THE PRODUCT WITH
INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. EZVIZ
SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR
OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR
OTHER INTERNET SECURITY RISKS; HOWEVER, EZVIZ WILL PROVIDE TIMELY TECHNICAL
SUPPORT IF REQUIRED. SURVEILLANCE LAWS AND DATA PROTECTION LAWS VARY BY
JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING
THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
EZVIZ SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH
ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE LAW, THE
LATTER PREVAILS.
Overview
Package Contents
The appearance of chime and power adapter is subject to the actual one you have bought.
Tools You May Need
Drill (x1)
It is recommended to use a drill with diameter of 6mm.
Basics
Doorbell
- LED Indicator
- Solid Red: Person detected and less than 20% of battery/doorbell button pressed and less than 20% of battery.
- Slow-Flashing Red: Charging.
- Solid Blue: Person detected or doorbell pressed/fully charged/more than 20% battery left.
- Power Button
- Short press for 1 second: Turn on the doorbell.
- Long press for 5 seconds: Turn off the doorbell
Chime
- LED Indicator
- Solid Red: Chime is starting up.
- Fast-Flashing Red: Disconnected from the doorbell or SD card error.
- Slow-Flashing Red: Wi-Fi connection has failed.
- Solid Blue: Chime is functioning properly.
- Fast-Flashing Blue: Chime is ready for Wi-Fi connection.
- Reset Button
- Hold the reset button for 5 seconds and if the doorbell beeps once, indicating that the reset is successful and all parameters will be reset to default.
Setup
It is recommended to place the chime within 4 meters from where the doorbell is installed.
Power-on
-
Short press the power button for 1 second to turn on the doorbell.
The doorbell LED indicator goes out after turning blue for 3 seconds, indicating that the doorbell is turned on. -
Plug the chime into a power outlet (within 4 meters from the doorbell). When the LED indicator is fast-flashing blue, it is ready for Wi-Fi connection.
Add to EZVIZ App
- Create a user account.
- Connect your mobile phone to Wi-Fi (suggested).
- Search for “EZVIZ” in the App Store or Google PlayTM. – Download and install the EZVIZ app.
- Launch the app and register an EZVIZ user account.
- Add chime to EZVIZ.
- Log in the EZVIZ app.
- On the Home screen, tap “+” on the upper-right corner to go to the scan QR code page.
- Scan the QR code on the body of the chime.
- Follow the EZVIZ app wizard to finish Wi-Fi configuration.
The doorbell will connect to the network by automatically connecting to the
chime.
- Please press the doorbell button to check. The chime rings indicating that the connection is successful.
- If the network connection of doorbell fails, please adjust the position of the chime. It is recommended to put the chime and doorbell within 4 meters.
- The doorbell beeps twice and the LED indicator fast-flashing blue, indicating that the network is not connected. Please check the network and if the Wi-Fi password is correct.
- The doorbell beeps twice and the LED indicator solid blue, indicating that the network is connected but failed to registered to the platform. Please check the network and use your cell phone for help.
Installation
Please visit the link below to watch the installation video.
https://support.ezvizlife.com/videos/map?id=46&title=EZVIZ%20DB2%20Tutorial%20-Video
Doorbell Installation
- Recommended installation height: 1.2m-1.5m.
- The following situations are not recommended for installation. Otherwise the network connection may be affected:
- Iron doors;
- Corners of load-bearing walls.
- Please make sure you have finished Wi-fi configuration of the chime and its LED indicator is solid blue before installation.
Step 1: Installation preparation
- If you have an existing doorbell system or have installed a mechanical or electronic chime, you can replace the existing doorbell with the EZVIZ doorbell.
- Please ring the existing doorbell first to make sure it’s working.
- Determine the mounting position of the doorbell, and check if you can reuse the existing holes on the wall.
If you don’t have a doorbell or chime installed, skip step 1 and directly go to step 2.
Step 2: Shut off the electricity at the breaker
Note: Always be careful when handling electricity wiring. If you’re not comfortable to do it yourself, do consult a qualified electrician.
Step 3: Select the mounting plate.
Use only the mounting plate, or use one of the inclined mounting plates as a
supplementary mounting bracket if you wish to see more on a specific
side.
Step 4: Install the mounting plate.
For users who have previously installed a doorbell or chime, please remove the old doorbell, take out the existing wires and pass it through the mounting plate.
Option A (for smooth wall)
Stick the plate foam on the mounting plate and then paste them to the
wall.
Option B (for uneven wall)
Place the drill template onto the surface you have chosen to mount the
doorbell. (Optional) Drill four screw holes and insert anchors. There is no
need to use anchor if you were installing on wooden doorframe.
It is recommended to use a drill with diameter of 6mm.
Fix the mounting plate to the wall. (Please fix the upper two screws
first.)
Step 5: Install the doorbell.
Option A (with existing wires)
- Connect the existing doorbell wires to the terminals at the back of the EZVIZ doorbell, then tighten the terminal screws.
- Install the doorbell to the mounting plate.
Option B (without existing wires)
Install the doorbell to the mounting plate.
Step 6: Restore power at the breaker.
Micro SD Card Installation (Optional)
- Insert the micro SD card (sold separately) into the card slot as shown in the figure below.
- In the EZVIZ app, tap the Storage Status in the Device Settings interface to check the SD card status.
- If the memory card status displays as Uninitialized, tap to initialize it. The status will then change to Normal and it can store videos.
Maintenance
Direct Charging
- Connect the doorbell to power outlet via power adapter.
- When charging, the doorbell will automatically turn on.
- If the doorbell is installed outdoors, please use waterproof power cable to charge.
Disassemble and Charge
- Turn off the tamper alarm on the EZVIZ app.
- Use the pin provided to press and hold the hole on the bottom of the doorbell, meanwhile push the doorbell upwards and then take it off.
- Connect the doorbell to power outlet via power adapter.
Please make sure to shut off the electricity at the breaker before removing the doorbell if it’s wire connected.
EXPOSURE TO RADIOFREQUENCY RF
The frequency bands and the nominal limits of transmitted power (radiated and/or conducted) applicable to this radio device are the following:
- Band Wi-Fi 2.4 GHz
- Frequency From 2.412 GHz to 2.472 GHz
- Power transmission (EIRP) 100 mW
For additional information about the device, please refer to www.ezviz.com/eu.
View Your Device
The app interface may be different due to version update, and the interface of the app you installed on your phone shall prevail.
Live View
- When you launch the EZVIZ app, the device page displays as shown below.
- You can view and listen to a live feed, take snapshots, record videos, and choose video definition as needed.
Swipe left and right across the screen to see more icons
- Share. Share your device with anyone you want.
- Settings. View or change the device settings.
- Video History. View Recordings.
- Snapshot. Take a snapshot.
- Record. Manually start/stop recording.
- Multi-screen Live. Tap to select live view window layout.
- Speak. Start using talk and listen.
- Definition. Select video resolution from Ultra HD, Hi-Def or Standard.
Please refer to the actual interface for specific information.
Settings
| Parameter | Description |
|---|---|
| Name | Customize the name of your device. |
Working mode
| • User Mode: Customize parameters like detection sensitivity and loitering duration
• Performance Mode: Under this mode, the device performance will be improved, but the power consumption will be increased.
• Power Saving Mode: Adjust the sensitivity and other parameters to extend battery life.
• Super Power-saving: Sleep Mode is on. Active live view can wake up the camera.
• Configure Working Mode: Customize the working mode in different periods.
Intelligent Detection
| You can customize the detection notification by changing the value of detection sensitivity. The higher sensitivity is, the easier people farther to the doorbell can be detected.
• Basic Detection(Required)
• PIR Infrared Detection: Higer sensitivity, farther detectable distance.
• Human Shape Detection: Higer sensitivity, farther detectable distance.
• Advanced Detection
• Loitering detection: when enabled, if people keep loitering around the doorway for longer than the period you have set up, alarms will be triggered. This
function is used to avoid loitering.
Devices will alert based on the selected mode, including device-side alerts and App-side message notifications.
Notification| You can set the notification from the device-side and app-side.
Audio
| • Doorbell Sound: When disabled, the doorbell will work while remaining silent.
• Chime Ringtone Settings.
• Voice Collection: When disabled, neither live view nor recorded videos will have audio.
Image
| • Auto(Recommended): Auto-Switch Day/Night Mode.
• Day and Night Switch Sensitivity.
• Enforcing Day Mode: IR mode stays off
• Enforcing Night Node: IR mode stays on, with clear images in dark environment.
Light
| • Doorbell indicator: When disabled, the doorbell indicator will be off.
• Chime Indicator: When disabled, the chime indicator will be off.
Speaker Settings
| • Wired Speaker
Chime Type: Please make sure you have installed wired speaker as below.
• Mechanical Chime: Makes a “ding-dong” sound through a mechanical bell.
• Electronic Chime: Produces a synthesized melody from a speaker.
• None of above: None of above.
Speaker can work with the doorbell. When ringing the doorbell, speaker can be rung at the same time.
Battery| You can see the battery capacity.
Cloud Storage| You can subscribe the cloud storage.
Record List| You can see the device storage status, include cloud storage and
memory card.
Security| • Video Encryption: When enabled, your videos will be encrypted.
• Change Encryption Password: You can change your password.
Network
| You can see the Wi-Fi name and the connection status.
If you want to change your device’s Wi-Fi, please hold the [RESET] button for 5 seconds or so to reset the device.
Device Information| You can see the device information here.
Share the device| Enter an email address or phone number to invite and grant
device permissions to a family member or guest.
In the settings page, you can set the parameters of the doorbell.
Initiatives on the Use of Video Products
Thank you for choosing EZVIZ products.
Technology affects every aspect of our life. As a high-tech company, we are
increasingly aware of the role technology plays in improving business
efficiency and quality of life, but at the same time, the potential harm of
its improper usage. For example, video products are capable of recording real,
complete and clear images. This provides a high value in retrospect and
preserving real-time facts. However, it may also result in the infringement of
a third party’s legitimate rights and interests if improper distribution, use
and/or processing of video data takes place. With the philosophy of
“Technology for the Good”, EZVIZ requests that every end user of video
technology and video products shall comply with all the applicable laws and
regulations, as well as ethical customs, aiming to jointly create a better
community.
Please read the following initiatives carefully:
- Everyone has a reasonable expectation of privacy, and the installation of video products should not be in conflict with this reasonable expectation. Therefore, a warning notice shall be given in a reasonable and effective manner and clarify the monitoring range, when installing video products in public areas. For non-public areas, a third party’s rights and interests shall be evaluated when installing video products, including but not limited to, installing video products only after obtaining the consent of the stakeholders, and not installing highly-invisible video products.
- The purpose of video products is to record real activities within a specific time and space and under specific conditions. Therefore, every user shall first reasonably define his/her own rights in such specific scope, in order to avoid infringing on a third party’s portraits, privacy or other legitimate rights.
- During the use of video products, video image data derived from real scenes will continue to be generated, including a large amount of biological data (such as facial images), and the data could be further applied or reprocessed. Video products themselves could not distinguish good from bad regarding how to use the data based solely on the images captured by the video products. The result of data usage depends on the method and purpose of use of the data controllers. Therefore, data controllers shall not only comply with all the applicable laws and regulations and other normative requirements, but also respect international norms, social morality, good morals, common practices and other non-mandatory requirements, and respect individual privacy, portrait and other rights and interests.
- The rights, values and other demands of various stakeholders should always be considered when processing video data that is continuously generated by video products. In this regard, product security and data security are extremely crucial. Therefore, every end user and data controller, shall undertake all reasonable and necessary measures to ensure data security and avoid data leakage, improper disclosure and improper use, including but not limited to, setting up access control, selecting a suitable network environment (the Internet or Intranet) where video products are connected, establishing and constantly optimizing network security.
- Video products have made great contributions to the improvement of social security around the world, and we believe that these products will also play an active role in more aspects of social life. Any abuse of video products in violation of human rights or leading to criminal activities are contrary to the original intent of technological innovation and product development. Therefore, each user shall establish an evaluation and tracking mechanism of their product application to ensure that every product is used in a proper and reasonable manner and with good faith.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>