Davis WindTrak™ LED Light User Manual
- June 6, 2024
- DAVIS
Table of Contents
Davis WindTrak™ LED Light User Manual
Illuminates WindTrak™ wind indicators for perfect night sailing
RUGGED LED BULB
Low current draw of less than 25 milliamps at 12 volts.
EASY TO MOUNT
Use with WindTrak 10, WindTrak 15, or J-Base mounting sockets.
TRUE WHITE LIGHT
Non-dazzling LED provides just enough lumens to light up WindTrak tabs and
reflectors.
WATERPROOF
Lens and body fit together tightly. Metal parts are non-corrosive silver.
WindTrak Light with WindTrak 15 (#3150). Mounts directly on the threaded part of the mounting sockets.
WindTrak Light with WindTrak 10 (#3120) or J-Base mounting sockets (#3125,
3155). Use 1/4” flat washer (not included) for mounting to J-Base.
This state-of-the-art LED bulb is polarized. Be sure to follow the correct polarity.
Replacement Bulb
Buy a white surface mount LED, Edison 10 mm (0.4″) diameter base. 30 watt, 12
volt, 0.1 amp.
Davis Instruments
3465 Diablo Avenue, Hayward, CA 94545 U.S.A.
www.davisinstruments.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>