SUNSKY WiFi Side View Camera Instruction Manual
- June 6, 2024
- sunsky
Table of Contents
SUNSKY WiFi Side View Camera
Product Introduction
F-car is the best intelligent camera product, can be installed in the Car blind area, to achieve safe driving. Widely used in cars, trucks, trailers and other special vehicles, can be connected to the car USB cigarette lighter or 5V mobile power supply, easy to use, fast installation.
- Simple installation, low cost to achieve intelligent vehicle monitoring.
- Hd video processor, image clear and smooth.
- High efficiency WIFI module, strong signal, long transmission distance.
Main Functions
- Smart phone watching video, real-time monitoring of vehicle blind area.
- Personalized operation mode, you can set the software operation mode according to the requirements.
- Driving record function, record wonderful moments.
- Video wonderful playback, a key to share circle of friends.
Download the application
- Scanning and downloading qr codes; Open the scan window and scan the qr code of the product manual.
- Search for download
Apple devices enter the APP Store search; F Car download Android devices go into Google play search; F – Car download
Use skills
- Terminal interface icon
Android devices cannot be used with 4G, while IOS devices can be used with 4G
- Android device use; After connecting to the WIFI of V-Car SSID, the APP video will pop up automatically. When 4G network is needed, click exit, and the connection between V-Car and the software background will be automatically disconnected.
- IOS old system usage
- After software installation, set static IP; Connect to V-Car name WIFI,
- enter the WIFI setting interface, remember the two lines of Numbers under “DHCP” (IP address. Subnet mask), click “static” here, and fill the two lines of Numbers under the static button (IP address. Subnet mask).
- Click back to set successful. Static IP can be set to realize simultaneous communication between WIFI and 4G without affecting the phone’s Internet access.
- New IOS system system usage;
- Find V-Car name WiFi.
- Remember in the IPV4 address bar; IP Address, Subnet Mask, Router, these three lines of Numbers.
- Click “Configure IP”, select “Manual”, fill in the following three rows of Numbers in the bottom, click save.
Product installation (very important, please read carefully)
- This camera is powered by 5V, and it is strictly prohibited to power on if the camera power cord is not connected properly.
- Confirm the installation position of the camera and put the power line in the car smoothly. Adjust the viewing Angle. Please clean the position to be pasted, fix the camera and plug the usb power port into the car.
Troubleshooting
-
There is no image Open your phone’s WIFI list to see if you can
find the v-car hotspots generated by the camera. If not, please check whether the camera wiring is correct and whether the power supply port of the connected line has been energized. With android 9.0, you need to click “use this network” to connect to WiFi for the first time -
Video is not fluid
A. The camera antenna needs to avoid shielding and metal contact, the antenna is best suspended
B. Turn off unused software in the background of the phone. Please keep the phone with enough running memory.
Product list
- Instruction
- camera
- USB extension cord 3M
- thread buckle
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>