hama 00 220882 Speaker Stand Instruction Manual

hama 00 220882 Speaker Stand

Product Information

This product is a mounting bracket manufactured by Hama GmbH & Co KG. It is designed to securely mount a device or object onto a surface. The bracket comes with an installation kit that includes various screws and fasteners.

Product Usage Instructions

1. Before starting the installation, ensure that you have all the required tools and the installation kit.
2. Inspect the installation kit to ensure that all the parts are present and in good condition.
3. Refer to the provided diagram (Fig. A ff.) to identify the different screws and fasteners in the installation kit.
4. Follow the safety notes mentioned in the user manual.
5. Prepare the surface where you want to install the bracket, ensuring it is clean and suitable for mounting.
6. Position the bracket on the surface and use a second person’s assistance to adjust and secure it properly.
7. Use the appropriate screws and fasteners from the installation kit to attach the bracket securely to the surface.
8. After installation, make any necessary adjustments or settings as per your requirements.
9. To ensure proper maintenance, refer to the maintenance instructions provided in the user manual.
10. For any warranty claims or issues, please contact Hama GmbH & Co KG. Note that improper installation, improper use, or failure to follow the operating instructions and safety notes may void the warranty.

Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Required tools

Installation kit

Installation

Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Explanation of Warning Symbols and Notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note
This symbol is used to indicate additional information or important notes.

Package Contents

• 2 speaker stands

• 6 support plates

• 2 brackets

• 2 adhesive hook-and-loop strips for securing the speakers

• Installation kit (see contents, Fig. 1)

• These operating instructions

Note
Please check that the installation kit is complete before installing the bracket and ensure that none of the parts are faulty or damaged.

Safety Notes

Warning

• Given the multitude of terminal devices, the supplied mounting kit is unable to cover every option.
• In a few cases, the screws for attaching the terminal device to the product are too long.
• Read the operating instructions for your terminal device before attempting to mount it. The instructions provide information about the type and measurements of suitable fastening materials.
• If the supplied mounting kit does not contain suitable fastening materials for mounting the terminal device, purchase these from a specialised dealer.
• Never apply force during mounting. This can damage your terminal device or the product.
• If in doubt, have this product mounted by a qualified technician – do not attempt to mount it yourself!
• Once you have mounted the product and the attached load, check that they are sufficiently secure and safe to use.
• You should repeat this check at regular intervals (at least every three months).
• When doing so, ensure that the product does not exceed its maximum permitted carrying capacity and that no load exceeding the maximum permitted dimensions is attached.
• Make sure that the product is loaded symmetrically.
• Maintain the necessary safety clearance around the attached load (depending on the model).
• In the event of damage to the product, remove the attached load and stop using the product.

Intended use and specifications

• The product is for domestic use
• The product is intended for indoor use only.
• Only use the product for the intended purpose.
• Maximum load bearing capacity: 5 kg
• Overall height: 75.8 – 120 cm

Installation requirements and installation

Note

•  Only mount the product with the help of a second person. Get the support and help you need.
• Different end devices have different options for connecting cables and other devices. Before installation, ensure that the necessary connections will still be accessible after installation.
• The same mounting kit is included with all of our TV wall brackets. Depending on the product and mounting type, you may not need to use the entire mounting kit. Unneeded screws and other small parts may be left over, even if the wall bracket is properly mounted. Keep these leftover parts with the operating instructions in a safe place, just in case you might need them later on.

Observe the other warnings and safety instructions.
Proceed step-for-step in accordance with the illustrated installation instructions (Fig. A ff.).

Setting and maintenance

Warning
Always adjust the product with the help of a second person. Get the support and help you need.

• To adjust the height, undo the connecting piece, set the required height and secure the connecting piece again. (see figure 5)
• Check that the bracket is secure and safe to use at regular intervals (at least every three months). Only use water or standard household cleaners for cleaning.

Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

References

• hama.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>