Hunter 50907 Vicenza Ceiling Fan Instruction Manual
- June 6, 2024
- Hunter
Table of Contents
50907 Vicenza Ceiling Fan
Vicenza
Installation Manual
Model: 50907 Brushed Nickel Fan weight ±2 lbs: 20.1 lbs (9.1 kg)
©2020 Hunter Fan Co.
PG3944 r101320
Congratulations on purchasing your new Hunter® ceiling fan!
The ceiling fan you purchased will provide comfort and performance in your
home or office for many years. This instruction manual contains complete
instructions for installing and operating your fan. We are proud of our work
and appreciate the opportunity to supply you with the best ceiling fan
available anywhere in the world.
We are here to help!
This Instruction Manual is designed to make installation as simple as possible. While working through this Instruction Manual, keep your smartphone or tablet nearby. We have added video links to help you through the more technical sections. If you are unfamiliar or uncomfortable with wiring, contact a qualified electrician. We also provide telephone support at 1.888.830.1326 or visit us at HunterFan.com.
READ and SAVE These Instructions
WARNING
1886
Warning
w.1 – To reduce the risk of fire, electrical shock, or personal injury, mount
fan directly from building structure and/or an outlet box marked acceptable
for fan support of 70 lbs (31.8 kg) and use the mounting screws provided with
the outlet box. w.2 – To avoid possible electrical shock, before installing or
servicing your fan, disconnect the power by turning off the circuit breakers
to the outlet box and associated wall switch location. If you cannot lock the
circuit breakers in the off position, securely fasten a prominent warning
device, such as a tag, to the service panel. w.3 To reduce the risk of
electric shock, this fan must be installed with an isolating wall
control/switch. w.4 – To reduce the risk of personal injury, do not bend the
blade brackets when installing the blade brackets, balancing the blades, or
cleaning the fan. Do not insert foreign objects in between rotating fan
blades.
Caution
c.1 – All wiring must be in accordance with national and local electrical
codes ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified
electrician. c.2 – Use only Hunter replacement parts. This equipment has been
tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and if not installed and used in accordance with the instructions may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
· Reorient or relocate the receiving antenna. · Increase the separation
between the equipment and receiver. · Connect the equipment into an outlet on
a circuit different from that to which the receiver is connected. · Consult
the dealer or an experienced radio/TV technician for help. Caution:
modifications not approved by the party responsible for compliance could void
user’s authority to operate the equipment. This device complies with Part 15
of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This product conforms to UL Standard 507.
Here are the tools you’ll need to complete your installation:
OPTIONAL
If mounting to a support structure, you will also need these tools.
Ladder
Screwdriver
Pliers
1
Wire Strippers
Drill
9/64″ Drill Bit
© 2020 Hunter Fan Company 7130 Goodlett Farms Pkwy, Suite 400 Memphis TN 38016
1886
Here is what comes in your box:
We recommend that you pull everything out of the box and lay it out. We have grouped the drawn components below with the hardware you’ll need for those parts. The screws below are drawn to scale to make it easier to identify what piece of hardware is needed to install each component.
Hunter Pro Tip:
Do not discard the hardware bags or mix parts from different bags. Make note
of the symbol printed on each hardware bag. The symbols can be used to
identify the appropriate hardware for each step.
BAG
Washer
x2
For installing the hanger bracket and wiring the fan
x2
Wood Screw
Wire Nut
x4
Ceiling Bracket
Canopy Downrod
Canopy Screw
BAG
x2
For installing the canopy
x12
BAG Blade Washer
x12
BAG
Blade Screw
Motor
Blade x4
For installing the blades
Wall Control and Extra Downrod
BAG
Spare Parts
For your convenience, you may receive extra fasteners.
M3843-01 r100520
Upper Switch Housing
LED Module
Glass
x6
Light Kit Screw BAG
Remote Receiver
Note:
Fan style may vary.
For installing the light kit
Find a part that is missing or damaged? Don’t take it back to the store. Let
us make it right. Visit us at HunterFan.com or call us at 1.888.830.1326.
2
1886
Choosing the Right Installation Location
You probably bought this fan with a location in mind. Let’s check below to make sure it is a good fit.
Check the room dimensions:
Check the outlet box:
30 inches
from blade tip to nearest wall or obstruction
7 feet
from bottom edge of blade to the floor
You must be able to secure the fan to building structure or fan-rated outlet box.
Standard Mounting
Support Structure
Checking the Ceiling Angle:
Angled Mounting
Support Structure
Ceiling Outlet Box (required)
Ceiling Outlet Box (required)
If you have a flat ceiling:
Hang your fan by a standard downrod. Some fans come with a shorter downrod for
a Low Profile installation.
If you have an angled or vaulted ceiling: 1. You will need a longer downrod.
(sold separately at HunterFan.com) 2. If your ceiling angle is greater than
34°, you will also need an
Angled Mounting Kit. (Sold separately at HunterFan.com)
Angled Mounting
A little more information on Angled Mounting:
For optimum performance and appearance, a longer downrod should be used with
your Hunter ceiling fan when installing on high or angled ceiling. If your
ceiling is angled greater than 34° you will also need an Angled Mounting Kit.
Longer downrods and the Angled Mounting Kit are sold separately at
HunterFan.com.
Hunter Pro Tip: Determining if you need an Angled Mounting Kit: Fold on the
dotted line. Place against edge againts the wall. Slide towards the ceiling.
If the guide touches the wall but not the ceiling, you need an angled mounting
kit.
34° CEILING
3
WALL
1886
Installing the Ceiling Bracket
You have two options for installation. Pick which one works best for your
location. Remove any existing bracket prior to installation. Only use the
provided Hunter ceiling bracket that came in your fan’s box.
Do this first!
Hunter Pro Tip:
The machine screws are the ones that came with your outlet box.
OFF Turn Power
WARNING
To avoid possible electrical shock, before installing your fan, disconnect the
power by turning off the circuit breakers to the outlet box associated with
the wall switch location.
Option 1: Machine Screws
Use machine screws (provided with outlet box) and washers when securing to
existing ceiling fan-rated outlet box. Make sure it is securely installed and
is acceptable for fan support of 31.8 kg (70 lbs) or less.
ANGLED MOUNTING TIP
Option 2:
Wood Screws
Use wood screws and washers (included) when securing to support structure with
approved electrical outlet box. Drill 9/64″ pilot holes in support structure
to aid in securing ceiling bracket with hardware found in the hardware bag.
x2
Washer
BAG
For angled ceilings, point opening toward peak.
Installing the Downrod
Follow below if you are using the downrod that came pre-assembled in your box. Need to install a longer or shorter downrod? Check out the guide at the end of this manual.
Hunter Pro Tip:
3
The ground wire attached to the
2
downrod is approximately 8 inches.
x2
Wood Screw
STEP STEP
(not to scale) CUT
& STRIP
STEP
1
KEEP
Remove the pre-installed setscrew so that the downrod can be inserted.
Ceiling Bracket
Hanging Fan
!
3/8″ 8″
Pass all wires to one side of horizontal bar in downrod assembly. Hand tighten the downrod (at least 45 full turns) until it stops. Trim the wires coming from the fan so that 8-inches remain coming from the top of the downrod.
Wiring
Blades
Tighten the setscrew with pliers. DO NOT HAND TIGHTEN.
WARNING
FAN FALL HAZARD To prevent SERIOUS INJURY or DEATH:
· ALWAYS tighten setscrew with pliers.
· DO NOT hand tighten setscrew.
· CHECK the setscrew is tight using pliers each time you change fan direction.
Light
Remote
4
1886
Hanging the Fan
Slide canopy over do
wnrod and wires.
Progress Check:
Your fan should look like this.
NOTICE
To prevent damage to fan, ALWAYS lift holding either the fan housing or the
downrod.
Place the downrod ball into the slot in the ceiling bracket.
5
Ceiling Bracket
Hanging Fan
Wiring
Blades
Note:
Fan style may vary.
Light
Remote
1886
Wiring the Fan
We know wiring is hard. Let’s make it easier.
Follow these steps to get your fan wired quickly and safely. Follow the route
below that best matches your wall switch setup. If you are unfamiliar with
wiring or uncomfortable doing it yourself, please contact a qualified
electrician.
Hunter Pro Tip:
Here is how to connect the wires: Push the bare metal ends of the wires
together and slide a wire nut over them. Then, twist the wire nut clockwise
until tight. Give it a gentle pull to make sure none of the wires are loose.
WARNING
The ceiling fan must be grounded. If the ground wire for the installation site
is not present, immediately STOP installation and consult a qualified
electrician.
Connect the black (ungrounded) wire from the ceiling to the black wire from
the receiver.
Black
Ungrounded
Slide the remote receiver onto the top of the bracket.
WARNING
All wiring must be in accordance with national and local electrical codes
ANSI/NFPA 70. If you are unfamiliar with wiring or in doubt, consult a
qualified electrician.
Hunter Pro Tip:
Have extra wiring? Turn the wires upward and push them carefully back through
the hanger bracket into the outlet box. Spread the wires apart, with the
grounded wires on one side of the outlet box and the ungrounded wires on the
other side of the outlet box. Make sure that the wires are still attached to
the wire nuts.
Connect the yellow wire from the receiver to the black wire from the fan.
Black
Yellow
Grounded
White
White
Connect the white (grounded) wire from the ceiling to both the white wire from
the receiver and the white wire from the fan.
x4
BAG
Wire Nut
Note:
Fan style may vary.
Ceiling Bracket
Hanging Fan
Wiring
Green/Yellow St
Blue Blue
Grounding
ripe
Green/Yellow Stripe
Connect the blue wire from the receiver to the blue wire from the fan.
Connect the three grounding wires (green, green/yellow stripe, or bare copper)
coming from the ceiling, downrod, and hanging bracket.
DR19-01 r091420
Blades
Light
Remote
6
Fit the canopy in
1886
place as shown.
Installing the Canopy
Insert the two canopy screws found in the hardware bag.
x2
BAG Canopy Screw
Lift the canopy into place so that the screw holes are aligned.
Installing the Blades:
Attach each blade to a blade iron using three blade washers, found in the
hardware bag, and three blade assembly screws, found in the hardware bag.
Repeat x4
x12
BAG
Blade Screw
x12
Blade Washer BAG
7
Ceiling Bracket
Hanging Fan
Wiring
IMPORTANT
NOTE: Follow the instructions on the blade. Installing it incorrectly could
result in your fan not functioning.
Blades
Light
Remote
Assembling the LIght Kit
2 of 6
BAG Light Kit Screw
1886
1 of 6
BAG Light Kit Screw
Partially install two light kit assembly screws, found in the
hardware bag, halfway into the motor housing as shown. It does not matter
which two screw holes you choose.
Feed the wire plugs through the center hole of the upper switch housing, then wrap keyhole slots around the screws and twist counterclockwise.
2 of 6
BAG Light Kit Screw
Insert the third screw, found in the hardware bag, into place and
then tighten all three screws.
1 of 6
BAG Light Kit Screw
Partially install two of the light kit screws found in the bag. It does not matter which two screw holes you choose. Connect the single-pin connectors from the LED assembly to the connectors from the fan. Connect the white wires together. Connect the blue and black wires together.
Align the keyhole slots in the light kit housing with the two screws. Make
sure all the wires from the fan and the light kit are snug inside the center
of the light kit, not pinched in between the upper switch housing and the
light kit or hanging out of the sides.
WARNING
FAN FALL HAZARD Make sure all screws are tight to secure the light fixture.
Installing the Glass
Turn the light kit counterclockwise until the light kit screws are firmly
situated in the narrow end of the keyhole slots. Install the third screw and
tighten all three screws securely.
Note:
Fan style may vary.
Tab Notch
Lift the globe and align the notches in the globe with the tabs in the light
kit.
Note:
Fan style may vary.
Ceiling Bracket
Hanging Fan
Wiring
Attach the globe by lifting and turning clockwise one third of a full turn of
the glass until it stops.
NOTE: Check to ensure proper engagement.
WARNING
GLASS FALL HAZARD
To prevent SERIOUS INJURY or DEATH, make sure that glass is properly secured.
Blades
Light
Remote
8
1886
Preparing the Wall Control
1 Turning off the power Ensure the power is OFF at the outlet box and wall switch location before proceeding with installation.
OFF Turn Power
2 Installing the battery To access the battery compartment, slide the battery
door up.
Replace the used battery with two AAA batteries when needed.
Battery Door
KEY PRESS
FUNCTION
LIGHT FUNCTIONS
Long Press Long Press
Long
Press
Light On/Off Light Dimming Control
Light High
Light Low
Dimming Mode On/Off
FAN FUNCTIONS
3 Wiring the Wall Control Connect the grounding wire from the wall control to
the ground control from the switch box using the provided wire nuts.
Connect the “LIVE IN” from the switch box to the “~VAC” from the wall control
using the provided wire nuts.
Connect the “LIVE OUT” from the switch box to the “FAN” out from the wall
control using the provided wire nuts.
Push all wires into the switch box.
Long Press Long Press
Long Press
Fan On/Off Fan Speed Control Fan High Fan Low
Power On/Off
Pair Function
4 Installing the Wall Control Install the longer screws through the slots in the wall control into the switch box screw holes.
7 The remote transmitter is already paired to the receiver and ready to use. If you need to pair your remote, cycle power to the fan by turning power off and back on at the wall switch (or circuit breaker if necessary). Within three minutes, do the following:
5 Installing the Wall Plate Install the shorter screws through the wall control plate and into the screw holes in the wall control.
8 Reference the included remote function card for information on how to use your wall control!
6 Turning on the power
ON Turn Power
9
Ceiling Bracket
Hanging Fan
Wiring
Blades
Light
Remote
1886
Reversing the Fan
Reverse Switch
Ceiling fans work in two directions: downdraft (counterclockwise rotation) and
updraft (clockwise rotation). To change the direction of air flow, turn the
fan off and let it come to a complete stop. Slide the reversing switch to the
opposite position. Restart the fan.
Updraft (clockwise rotation) creates a more indirect airflow. Updraft airflow
is great for moving warm air downward.
Downdraft (counterclockwise rotation) creates a direct breeze and maximum
cooling effect.
Limited Lifetime Warranty
Hunter Fan Company grants this limited warranty to the original purchaser of
this Hunter ceiling fan. This document can be found at www.HunterFan.com.
Thank you for choosing Hunter!
How Can Warranty Service Be Obtained?
Proof of purchase is required when requesting warranty service. The original
purchaser must present a sales receipt or other document that establishes
proof of purchase. Hunter, at its sole discretion, may accept a gift receipt.
To obtain service, contact Hunter Fan Company online or by phone.
www.HunterFan.com/Support/Contact-Us/
1-888-830-1326
Please do not ship your fan or any fan parts to Hunter. Delivery will be
refused.
What Does This Warranty Cover?
Motor — Limited Lifetime Warranty If any part of your ceiling fan motor fails
during your ownership of the fan due to a defect in material or workmanship,
as determined solely by Hunter, Hunter will provide you with a replacement fan
free of charge. The foregoing limited warranty applies only to the motor
itself and does not apply to electronic controls such as remote control
transmitters, remote control receivers, or capacitors used in conjunction
with the motor. Such electronic control items are included in the one-year
limited warranty below.
Other — One-Year Limited Warranty Except as otherwise indicated throughout
this warranty, if any part of your Hunter ceiling fan fails at any time within
one year of the date of purchase due to a defect in material or workmanship,
as determined solely by Hunter, Hunter will provide a replacement part free of
charge.
Light Kits — Warranty May Vary Light kits are included in the one-year limited
warranty. However, you may qualify for additional warranty coverage if your
fan includes one of the following:
· LED Light Kits — Three-Year Limited Warranty If your LED light kit module
(not including glass components) or LED bulb fails at any time within three
years of the date of purchase due to a defect in material or workmanship, as
determined solely by Hunter, Hunter will provide a replacement part free of
charge.*
- If no replacement product/part can be provided for your fan, we will provide a comparable or
superior replacement product/part at the sole discretion of Hunter.
What Does This Warranty NOT Cover?
Labor Excluded. This warranty does not cover any costs or fees associated with the labor (including electrician’s fees) required to install, remove, or replace a fan or any fan parts. There is no warranty for light bulbs (except where otherwise noted); remote control batteries; fans purchased or installed outside the United States; fans owned by someone other than the original purchaser; fans for which proof of purchase has not been established; fans purchased from an unauthorized dealer; ordinary wear and tear; minor cosmetic blemishes; refurbished fans; and fans that are damaged due to any of the following: improper installation, misuse, abuse, improper care, failure to follow Hunter instructions, accidental damage caused by the fan owner or related parties, modifications to the fan, improper or incorrectly performed maintenance or repair, improper voltage supply or power surge, use of improper parts or accessories, failure to provide maintenance to the fan, or acts of God (e.g. flood). ORIGINAL PURCHASER’S SOLE AND EXCLUSIVE REMEDY FOR A CLAIM OF ANY KIND WITH RESPECT TO THIS PRODUCT SHALL BE THE REMEDIES SET FORTH HEREIN. HUNTER FAN COMPANY IS NOT RESPONSIBLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, DUE TO PRODUCT FAILURE, WHETHER ARISING OUT OF BREACH OF WARRANTY, BREACH OF CONTRACT, OR OTHERWISE. Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE APPLICABLE TO THIS PRODUCT ARE LIMITED IN DURATION TO THE PERIOD OF COVERAGE OF THE APPLICABLE LIMITED WARRANTIES SET FORTH ABOVE. Some States do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
How Does State Law Affect Warranty Coverage?
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
10
1886
Downrod If you need a different downrod length follow these steps:
Follow steps 1-5 to remove standard downrod pipe
1
2
3
4
5
Pin
1
83
56
10
9
7
2
4
10
9
8
7
6
Follow steps 6-10 to reassemble with new downrod
WARNING
FAN FALL HAZARD
To prevent SERIOUS INJURY or DEATH:
· ALWAYS follow the downrod assembly instructions exactly.
· VERIFY the downrod is assembled correctly by firmly pulling on the hanger ball.
· Pin must be reinserted to secure downrod assembly.
Here is another view of the downrod assembly unassembled.
Pin
Assembled downrod should look like this
Troubleshooting
Fan Doesn’t Work
· Make sure power switch is on. · Check the circuit breaker to ensure the
power is turned on. · Make sure the blades spin freely. · Turn off power from
the circuit breaker, then loosen the canopy
and check all the connections according to the wiring diagram.
Excessive Wobbling
· Make sure the blades are properly installed on the blade iron posts.
· Turn the power off, support the fan carefully, and check that the hanger
ball is properly seated.
· Use the provided balancing kit and instructions to balance the fan.
Noisy Operation
· Make sure the blades are properly installed. · Check to see if any of the
blades are cracked. If so, replace all of
the blades.
Remote Control of Fan is Erratic
· Make sure the battery is installed correctly. · Install a fresh battery.
Multiple Remote Issues
· If you have multiple remotes or multiple remote-controlled fans installed on
the same circuit breaker and you are experiencing interference or faulty
operation of your remote controls, please go to www.HunterFan.com/FAQs and
click “How do I properly install multiple remote-controlled fans?” for
information on how to correct this issue.
11
Hunter Pro Tip:
Cleaning the Fan Use soft brushes or cloths to prevent scratching. Cleaning
products may damage the finishes.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>