NEAR IG4M All-Environment In-Ground Outdoor Loudspeaker User Guide
- June 6, 2024
- NEAR
Table of Contents
- NEAR IG4M Loudspeaker Features
- IG4M Power Setting Rotary Switch Selector
- Wiring using IG4M “Perfect Fit” Connector Sockets
- IG4M In-Ground or On-Ground I nsta Ila ti on
- Securing an IG4M in the ground when the area water table is high or
- IG4M Wiring Connection: Low Impedance System
- IG4M Wiring Connection: 70V/8-ohm Hybrid System
- LIMITED WARRANTY: Exclusion of Certain Damages
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
1G4M
ALL-ENVIRONMENT, IN-GROUND, OUTDOOR LOUDSPEAKER
QUICK START INSTALLATION AND SETUP GUIDE
1GM
ALL-ENVIRONMENT, IN-GROUND, OUTDOOR LOUDSPEAKER
The NEAR® IG4M is a limited bandwidth “satellite” speaker, intended to be used with a subwoofer and a power amplifier with a 90Hz, 1 dB/octave high pass filter (crossover) like that provided by NEAR XL series amplifiers. Its 120-degree wide dispersion means fewer speakers are needed to cover an area with high clarity sound than competing systems with 60-degree dispersion; every listener in the coverage area will hear full performance sound without overly loud “hot” and low fidelity “dead” zones
The IG4M provides maximum system design and wiring flexibility. Integrators can choose to power the IG4M satellite speakers with a low impedance amplifier or a 70V line. Selection of 70V power levels or low impedance operation is made via a rotary switch located under a protective cover. On the underside of the IG4M enclosure are two IP-67 rated “Perfect Fit” connectors that allow convenient daisy chain wiring of multiple speakers on a single signal line. The supplied connector socket and plugs are keyed to prevent wiring polarity problems while their double O-ring design prevents ingress of water and dirt for long-term signal integrity.
The IG4M speakers are truly weather-proof, not just “weather-resistant,” and
can be used when totally exposed to the elements. The enclosures are color-
through, Linear Low- Density Polyethylene that sheds moisture, dirt, and
chemicals. The UV inhibitor pigments are embedded uniformly throughout the
material so the sun won’t fade the speaker’s color.
Best of all is the sound quality. The IG4M’s wide dispersion design and high-
tech components ensure well-balanced, lifelike sound at every volume level
without fatigue. The IG4M satellite speakers utilize Metal Diaphragm
Technology (MDT) woofers and 1-inch metal alloy tweeters both with Magnetic
Liquid Suspension (MLS) technology.
NEAR IG4M Loudspeaker Features
| 
---|---
- Protective Grille
- Metal-Alloy Woofer and Tweeter Diaphragms
- Ultra-rugged Molded Enclosure with UV Inhibitors
- Included Speaker Ground Stake for on-ground mounting
- Two (2) IP-67 Rated “Perfect Fit” connector sockets
- Wiring/Conduit Channels (underside)
- 70V/16-ohm Rotary Switch located under the protective cover (see section 2)
IG4M Power Setting Rotary Switch Selector
Integrators can choose to power the
IG4M satellite speakers with a low impedance amplifier or a 70V line.
Selection of 70V power levels or low impedance operation is made via a rotary
switch located under a protective cover. When used in low impedance mode, the
satellite’s 16-ohm load allows up to four IG4Ms to be paralleled and safely
driven by typical AV receivers.
Wiring using IG4M “Perfect Fit” Connector Sockets
Detail showing cable being cut for the first speakers in a chain to extend the length
IG4M In-Ground or On-Ground I nsta Ila ti on
| 
---|---
An IG4M speaker may be placed on the surface using the supplied ground stake
to secure the speaker into position (see example 1 ).
If you choose to partially bury the IG4M (up to the bottom of the speaker’s
grille, maximum), it is not necessary to use the ground stake. To ensure
better drainage, it is good practice to add a few inches of crushed stone,
covered by a layer of landscape fabric.
Pack the earth around the speaker as tightly as possible so as to keep large
amounts of water from streaming down the sides of the enclosure and into the
excavated hole (see example 2). If the water table is unusually high at the
speaker location, see section 48 for further instructions.
Securing an IG4M in the ground when the area water table is high or
frequent soaking occurs
Use two (2) screws (MS) with washers to attach a rust-proof Metal Plate or LI-
Channel to the bottom of the IG4M speaker.
Use a weighted object such as a landscape block or heavy stone to further
secure the speaker during soaking or flooding conditions.
IG4M Wiring Connection: Low Impedance System
Each IG4M speaker is set to 16 ohms (factory setting). This result is a 4-ohm load at the amplifier. The subwoofer in the example, NEAR IGS100M/K, is wired as a 4 ohm speaker (there are two voice coils in parallel). See Section 2 on the Switch Diagram.
FOR NEARSCAPES IG44.1 SYSTEMS;
NEAR 3XL/7XL Power Amplifiers have PRESETS specific to this system. Select for
easy system setup:
ALTERNATIVE:
NEAR 3XL17XL Power Amplifiers have cross over and equalization PRESETS
specific to various combinations of this speaker with NEAR subwoofers. Consult
the XL amplifier manual for easy system setup settings.
IG4M Wiring Connection: 70V/8-ohm Hybrid System
Example of a Hybrid System: 4 ohms on Channel A (subwoofers), 70V on Channel B with each IG4M speaker set to the 32W position.
LIMITED WARRANTY: Exclusion of Certain Damages
The NEAR• IG4M Loudspeaker is warranted to be free from defects in material and workmanship for 5 (five) years from the date of sale to the original purchaser. Any part of any NEAR product covered by this warranty that, with normal installation and use, becomes defective (as confirmed by Bogen upon inspection) during the applicable warranty period, will be repaired or replaced by Bogen, at Bogen’s option, provided the product is shipped insured and prepaid to: Bogen Factory Service Department: 4570 Shelby Air Drive, Suite 11, Memphis, TN 38118, USA. Repaired or replacement product will be returned to you freight prepaid. This warranty does not extend to any of our products that have been subjected to abuse, misuse, improper storage, neglect, accident, improper installation or have been modified or repaired or altered in any manner whatsoever, or where the serial number or date code has been removed or defaced.
THE FOREGOING LIMITED WARRANTY IS BOG EN’S SOLE AND EXCLUSIVE WARRANTY AND THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY FOR NEAR PRODUCTS. BOGEN MAKES NO OTHER WARRANTIES OF ANY KIND, EITHER EXPRESSED OR IMPLIED, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED AND EXCLUDED TO THE MAXIMUM EXTENT ALLOWABLE BY LAW. Bogen’s liability arising out of the manufacture, sale or supplying of NEAR products or their use or disposition, whether based upon warranty, contract, tort or otherwise, shall be limited to the price of the product. IN NO EVENT SHALL BOGEN BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS, LOSS OF DATA, OR LOSS OF USE DAMAGES) ARISING OUT OF THE MANUFACTURE, SALE, OR SUPPLYING OF NEAR PRODUCTS, EVEN IF BOGEN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSSES. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from State to State.
NEAR products that are out of warranty will also be repaired by the Bogen Factory Service Department — same address as above or call 201-934-8500. The parts and labor involved in these repairs are warranted for 90 days when repaired by the Bogen Factory Service Department. All shipping charges in addition to parts and labor charges will be at the owner’s expense. All returns require a Return Authorization number. For most efficient warranty or repair service, please include a description of the failure. Products manufactured and labeled by other companies may be covered by warranties offered by such companies. Please call Bogen Customer Service or refer to the product packaging for the manufacturer’s warranty for non-NEAR branded products.
YOU MUST ACCURATELY FOLLOW THE INSTRUCTIONS FOR ALL THE PA RTS INVOLVED IN THIS INSTALLATION. FAILURE TO DO SO CAN CAUSE SERIOUS INJURY OR DEATH TO YOURSELF OR OTHERS AND MAY EXPOSE YOU TO POSSIBLE LEGAL ACTION.
NOTHING COMES CLOSER
www.bogen.com
NEAR is a division of Bogen Communications, Inc.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>