NEAR NSM12 Blinds Chain Motor Controller User Manual
- June 5, 2024
- NEAR
Table of Contents
Blinds Chain Motor Controller
Mobile Version
Character
- No change of existing blinds, no tubular motor. One-touch, manual to the motor;
- WI-FI connector: work with google home, Alexa amazon, etc directly;
- Schedule: Automate your blinds to open in the morning and close in the evening;
- Long-distance: Open or close your home blinds anywhere you are with the Near app ;
- Easy mounting and set-up;
- Control: Mobile and remote;
Open Motor and Choose Blinds Direction
-
Open motor: The motor will open with the mini button.
-
Chain position: Left direction: Facing blinds, chain/rope on the left hand.
Right direction: Facing blinds, chain/rope on the right hand. -
Surface up, slide the mini button to the left or right. light shine;
Use the app to set directions.
Note: Adjust the mini-buttons carefully to avoid damage.
Built Connect With Mobile
- Search and download “Near” in major application markets or scan the “QR code” below to download the App, www.near.sg
- OPEN” Near App, and connector with motor;
Sweep Downloads APP
https://a.smart321.com/near
Mounting
-
Pull down the birds to a similar mounting position, Put the card on the bottom of the chain, tight chain, According to the chain position, mark” • or R” on the hole, put a mounting bracket on the card’s position, ( pis note card outside of the bottom bar)
-
Installation mode 1:
Use the 3M tape to secure the mounting bracket on your wall.
Make sure that the wall is clean and the paint is not powdery or flaky. Install the chains after 12 hours. -
Installation mode 2:
Align the mounting bracket vertically or horizontally and Screw them into position. -
Installation mode 2:
Release the cover, select the right chain head, align the blind chains to the chain head, and close the cover. -
Tighten chain on the motor, put motor slide groove down, until motor tight on groove, pis choose suitable chain tension for stable running.
Note: Please use the suitable gear for the chain, and adjust the tension to avoid noise.
Trip Setting
Function Setting
-
Schedule: Use the Near App to create schedules for your blinds to open and close automatically.
Step 2:
Device added successfully More Schedule -
Voice control
Near Welcome home upper right corner -
Connector with google Alexa etc
Near Welcome home me more service Alexa, Google Assistant. -
Work not only with mobile but also with remote.
Recover factory setting & Product take out
Long press the “up” & “down” buttons together for 8 seconds, and recover the
factory setting.
Top up the projection on the bottom, slide upon the groove, open up the
backboard and take out the chain.
Parameters
Name| BLINDS CONTROLLER| Model| NSM12| Control
Method
MOBILE or|
REMOTE
---|---|---|---|---|---
Torque| 1.35N.m| Speed| 55rpm| Adapter Voltage| 110V-240V
Frequency| 2.4GHz| Voltage| 12V| Rated Current| 1.2A
Max Blinds Size| 8FT(2.5M)*12FT(3.5M)| Max Weight| 10KG|
Battery Capacity| 12V/1200mAH
Distance| No limit , ask for a good wifi signal| Compatible|
Directly connector with google home. Alexa etc
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>