NEAR Wi-Fi Smart Door Lock User Manual
- June 5, 2024
- NEAR
Table of Contents
NEAR Wi-Fi Smart Door Lock
Installation
- Professional installation recommended
- Pay attention to the connecting line during installation
- Adjust the handle’s direction according to the instructions
- Please keep the door half opened during installation.
- After installation, please try accessing the door with fingerprint, passwords, NFC Cardkey, Mechanical keys, internal and external door handles.
- Refer to the manual to rectify any issues before using the lock.
Installation diagram
- Outer panel
- Connecting column
- Lock body
- Square steel
- Battery case cover
- Connecting screw
- Rear handle
- Lock body fixing screw
- Emergency power supply port
- Lock core
- Front handle.
- Knob
- Anti lock pick up
- Setting key
- Lock body(5050)
Determine the direction of the handle
Change direction of the handle
- Remove the cross screw in the figure, Turn the handle 180 degrees in the direction of the arrow.
- After adjusting the handle direction, install the screw and complete the reversing.
Open the installation hole:
According to the hole drawing and the lock body model.
Install the lock body:
- Support Lock Body: 5050 only
- Adjust direction of the diagonal tongue according to the direction of the door.
- Lock Body Reversing
- Pull the reversing paddle of locking tab to the other end.
- Push the Oblique tongue into the lock body and rotate 180°
- Release reversing paddle.
- Install the lock into the door frame and (hang the heaven & earth hook, tighten the fixing screw in the lock body – 6052 Lock Configuration)
Door lock installation
- Connect the two corresponding studs on the outer plate
- Fixed outer panel
- Insert the square bar into the square bar hole
- Pull the main board connecting cable into the door
- Align the outer panel with the opening position and install the square bar
- Fixed inner panel
- Connect the main board connecting line, and put the redundant line into the slot.
- Insert the anti lock paddle. The length of the paddle can be cut according to the thickness of the door (6052 lock body only)
- Align the square bar of the inner panel and compress the inner panel.
- Lock the screws and fix the panel.
Install the door buckle plate and buckle box
5 in 1 Near Smart Door Lock Operation Manual
Function and Operation
- Description of terms and functional keys
- Administrator information: refers to the administrator’s fingerprint, password or NFC Card
- Unlock information: refers to the input fingerprint, password or NFC Card information (including administrators and ordinary users).
- Key “*”: clear key / back key. Enter the password and point by clearing the previous input. Click the clear key three times in succession to empty all input.
- Key “#”: confirmation key or menu function key.
Original State
- Before setup, the smart lock can be unlocked with any fingerprint, NFC card, password. The factory password is: 123456.
- Any fingerprint, NFC card or password which are unregistered after the setup will not have access to the smart lock.
Access door lock function management (step one)
Administrator settings
- Add administrator (step 2)
- Delete administrator information
5. Common user setting
- Add administrator information
- Deleting user information
6. System setting
- Voice setting
- Unlock mode setting
- Unlock mode setting
- Language settings
- Time setting
7. Restore factory settings
APP Configuration (Nears App) optional
- Search “Near Smart” in App Store or an App market, download and install it.
- Register using your email and log in.
- Select Lock (Wi-Fi)”, click and add a device following instructions before use.
- Remote unlocking: wake up the screen and press “9”+”#”
- There will be a voice prompt: requesting remote unlocking.
Add a network
- Press” *” +” # ” to authenticate administrator identity and then press “1” to access administrator settings. Then there will be a voice prompt of pressing “3” for network configuration.
- Voice prompt in network configuration mode: press “1” for hotspot connection and “2” for intelligent Connection.
- Hotspot connection mode:
- Intelligent connection mode:
- When the network is successfully added, the 1″, 2″, 3 and 4 lights on the keyboard will be on in order with a voice prompt of “operation completed”
- In the event of network addition failure, the 1, 2, 3 and 4 lights on the keyboard will not be on and there will be a voice prompt of “operation failed” upon timeout.
Other notes
- Input the wrong password more than 5 times in a row, the keyboard locks for 30 seconds, it does not respond to any operating system in 30 seconds.
-
- Password peeping prevention function: input password as follows when opening the door with password: XXX password XXX; you can add false codes before and after the password, and then press # to confirm. The password must be included in the input contents.
- If there is no activity for more than 10 seconds, the system will exit setting status.
- If the voltage is lower than 4.8V, the lock will automatically alarm every time it is unlocked. (Note: Smart lock open/close for about 200 times before replacement is required. As an indicator, if your smart lock takes more than 5 seconds, the battery needs to be replaced.)
- When normal open mode is switched off, press 5# repetitively and when the voice broadcast says “Please enter unlock information”. Enter unlocking the smart lock, you will hear “Normal mode opened, please pay attention when you lock”
- When the normal open mode is active, press 5# repetitively, and you will hear “normal open mode closed”.
Technical Parameters
Technical Parameters
| Items| Parameters| Memo
1| Quiescent current| ≦ 50uA|
2| Dynamic current| ≦ 180mA|
3| Administrators ’ number| 9|
4| Fingerprint number| 100|
5| Fingerprint + password + card capacity| 200|
6| Fingerprint scanner| semiconductor|
7| Fingerprint contrast time| ≦ 0.6Second|
8| Fingerprint identification Angle| 360°|
9| False Rejection Rate| ≦ 0.1%|
10| False Recognition Rate| ≦ 0.0001%|
11| Reaction time| ≦ 0.1 Second|
12| Power type| 6V|
13| Emergency powering| 5VDC|
14| Working temperature| – 25℃~60℃|
15| Working Relative Humidity| 20%~90%RH|
16| Human voice| Yes|
17| KBD| Touch standard 12 – bit keyboard|
18| Password Length| 4- 8bit|
19| Phantom password| 32bit|
20| Low voltage alarm| 4.8 ± 0.2V|
21| Unlock time| ≦ 1Second|