NEAR IG8s2M All-Environment In-Ground Outdoor Loudspeaker User Guide
- June 6, 2024
- NEAR
Table of Contents
- In-ground Installation and Connection of IG-Series Loudspeakers
- In-ground Mounting/Burial of IG-Series Loudspeakers
- In-ground Install Angles of IG-Series Loudspeakers
- Wiring Connection Setup Examples for IG-Series Loudspeakers
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
IG-SERIES
MODELS: IG8s2M & IG6s2M
ALL-ENVIRONMENT IN-GROUND,
OUTDOOR LOUDSPEAKERS
QUICK START INSTALLATION
AND SETUP GUIDE
ALL-ENVIRONMENT IN-GROUND,
OUTDOOR LOUDSPEAKERS
The NEAR° IG-Series Loudspeakers (2 Models: IG8s2M & IG6s2M) are fully- sealed in-ground, outdoor speakers which provide exceptionally natural sound and can withstand nearly all types of environment and weather conditions. These speakers combine two industry-leading technologies from NEAR: Metal Diaphragm Technology (MDT), which ensures speaker cone stability in all- environment conditions; and Magnetic Liquid Suspension (MLS), a Ferrofluid seal around the magnet gap and voice coil which provides protection from moisture and corrosion, as well as near-perfect voice coil alignment.
Placement and Sound Quality
The dispersion of the IG speakers is a full 360 degrees! This means that the orientation of the speakers, whether mounted in-ground or on-ground, is not critical. However, by design, the frequency response is smoother throughout the midrange when the enclosures are mounted in the ground, buried up to the NEAR badges on the loudspeaker enclosure. This mounting method also ensures a high level of security once the ground around the enclosure is packed firmly. In addition, as the ground packs more firmly around the speaker enclosure, the bass and midrange clarity improve. This is due to a reduction in the resonance of the molded enclosure which, by virtue of its round shape with extensive ribbing, is already quite inert. The addition of the solid earth around the enclosure, in essence, makes the walls more solid, less resonant, and less of a factor in any coloration of the sound.
The IG-Series is designed in a unique manner so that water will shed evenly off the top of the enclosure. There are several drainage paths from the tweeter and woofer mounts, as well as the channel where the grille is mounted. Even if the speaker is tilted in any direction, water will still drain away efficiently and completely.
IG — SERIES
Models IG8s2M and IG6s2M
Loudspeaker Features
-
IG8s2M: 8-inch Nominal Diameter Metal Alloy UDIO Woofer; 1-inch Titanium Alloy Dome Tweeter
IGs2M: 6-1/2-inch Nominal Diameter Metal Alloy UDIO Woofer; 1-inch Titanium Alloy Dome Tweeter -
Polyethylene Enclosure with UV Inhibitors
-
Stainless Steel Grille
-
Water Drainage Canal
-
Wiring/Conduit Channels (underside)
-
Input Connection Cable from Loudspeaker
In-ground Installation and Connection of IG-Series Loudspeakers
Direct Burial of Cable or Conduit
Depending on the type of installation, the direct burial of the speaker cables
from the amplifier to the loudspeakers may be adequate, or the use of a 1″ to
1-1/2″ ID conduit may be required for protecting the wires from possible
physical damage if future excavation or other alterations are anticipated in
the area of the install.
An IG-Series loudspeaker can accommodate either method, including the entry
and exit conduits sliding conveniently under the bottom of the enclosures
through provided wiring/ conduit channels.
Connections can be protected using one of the following methods:
-
RECOMMENDED: Optional NEAR
Model 1E1 Direct-Burial Junction
Box (IP67 Rated) allows convenient access to connections (Detail A)
-
Solder connection wires together using waterproof heat shrink tubing to make a seal
-
Make connections with immersion-resistant Crimp Splices (Raychem)
-
Using Grease Wire Caps, available from several suppliers (such as Orbit, Toro Irrigation, etc.)
In-ground Mounting/Burial of IG-Series Loudspeakers
When excavating for the burial of an IG-Series Loudspeaker select an area that will support the depth needed to accept the enclosures. The IG Loudspeakers’ burial depth should be up to the speaker’s “NEAR Badge” (A). In addition to the depth the speaker requires as above instructed, it is recommended that further excavation be made beneath each enclosure so that 6 inches of crushed stone can be added to provide proper drainage. Some type of standard drainage fabric should then be placed as a buffer between the speaker and the crushed stone base.
In-ground Install Angles of IG-Series Loudspeakers
The IG-Series Loudspeakers were designed with a slightly angled driver so that even if the enclosure is situated on a level plane (see Install 1 & 2) any accumulated moisture can be channeled out of the speaker through the two Drainage Canals (A) located on either side of the speaker. Even if choosing a more sloped install angle (Install 3), the speaker will still drain water from the driver when Drainage Canal is angled downward (B).
Wiring Connection Setup Examples for IG-Series Loudspeakers
EXAMPLE OF TWO-ZONE 70V CONFIGURATION WITH VARIOUS TAPS SELECTED
WARNING: Customer is responsible for the wiring materials to/from the
amplifier and to/from other speakers/subwoofers, as well as the selection of
the installation area. It is recommended that a professional be consulted when
connecting speakers if the installer does not have sufficient knowledge in
working with electrical components.
EXAMPLE OF A HYBRID 8-OHM/70V SYSTEM CONFIGURATION FULL-RANGE LOUDSPEAKERS
PLUS SUBWOOFERS
*NOTE: NEAR 7XL and 3XL amplifiers feature embedded DSP presets that may be helpful in getting the best performance from various NEAR speaker systems. Visit www.nearspeakers.com/manuals—spec- sheets.html for detailed information and amplifier software updates.
LIMITED WARRANTY: Exclusion of Certain Damages
The NEAR’) IG-Series Loudspeakers are warranted to be free from defects in material and workmanship for 5 (five) years from the date of sale to the original purchaser. Any part of any NEAR product covered by this warranty that, with normal installation and use, becomes defective (as confirmed by Bogen upon inspection) during the applicable warranty period, will be repaired or replaced by Bogen, at Bogen’s option, provided the product is shipped insured and prepaid to Bogen Factory Service Department, 4570 Shelby Air Drive, Suite 11, Memphis TN 38118, USA. Repaired or replacement product will be returned to you freight prepaid. This warranty does not extend to any of our products that have been subjected to abuse, misuse, improper storage, neglect, accident, improper installation, or have been modified or repaired or altered in any manner whatsoever, or where the serial number or date code has been removed or defaced.
THE FOREGOING LIMITED WARRANTY IS BOGEN’S SOLE AND EXCLUSIVE WARRANTY AND THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY FOR NEAR PRODUCTS. BOGEN MAKES NO OTHER WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED AND EXCLUDED TO THE MAXIMUM EXTENT ALLOWABLE BY LAW. Bogen’s liability arising out of the manufacture, sale, or supplying of NEAR products or their use or disposition, whether based upon warranty, contract, tort, or otherwise, shall be limited to the price of the product. IN NO EVENT SHALL BOGEN BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS, LOSS OF DATA, OR LOSS OF USE DAMAGES) ARISING OUT OF THE MANUFACTURE, SALE, OR SUPPLYING OF NEAR PRODUCTS, EVEN IF BOGEN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSSES. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from State to State.
NEAR products that are out of warranty will also be repaired by the Bogen Factory Service Department — same address as above or call 201-934-8500. The parts and labor involved in these repairs are warranted for 90 days when repaired by the Bogen Factory Service Department. All shipping charges in addition to parts and labor charges will be at the owner’s expense. All returns require a Return Authorization number. For the most efficient warranty or repair service, please include a description of the failure.
Products manufactured and labeled by other companies may be covered by warranties offered by such companies. Please call Bogen Customer Service or refer to the product packaging for the manufacturer’s warranty for non-NEAR branded products.
| This product is subject to European Union regulations that promote the reuse
and recycling of used electrical and electronic equipment. The symbol at left,
on the product, its batteries, or packaging, means that the product and its
batteries must not be disposed of with your household waste. Instead, it is
your responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help to conserve natural resources and
ensure that it is recycled in a manner that protects human health and the
environment. For more information on where to drop off your waste equipment,
please contact your local city office, your household waste disposal service,
or the place where you purchased the product.
---|---
| DECLARATION OF CONFORMITY STATEMENT: Bogen Communications, Inc. hereby
declares that this product is in compliance with the essential requirements
and other relevant provisions of all applicable European Union Directives. The
Declaration of Conformity is the manufacturer’s declaration that the product
complies with those Directives. The complete Declaration of Conformity can be
found at: www.nearspeakers.com.
| YOU MUST ACCURATELY FOLLOW THE INSTRUCTIONS FOR ALL THE PARTS INVOLVED IN
THIS INSTALLATION. FAILURE TO DO SO CAN CAUSE SERIOUS INJURY OR DEATH TO
YOURSELF OR OTHERS AND MAY EXPOSE 1 YOU TO POSSIBLE LEGAL ACTION.
---|---
www.bogen.com
NEAR® is a Division of Bogen Communications, Inc.
Specifications are subject to change without notice.
© 2019 Bogen Communications, Inc.
740-00114A
1904
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>