Chroma-Q 632-6000 Adjustable Pump for Pond User Guide
- June 6, 2024
- Chroma-Q
Table of Contents
Chroma-Q 632-6000 Adjustable Pump for Pond User Guide
1. Overview
The new Chroma-Q® Inspire Mini™ LED house light is a multi-purpose fixture with a single light engine featuring 30 high powered LEDs (combination of white, red, green and blue) and a fully homogenized optic. The Inspire Mini™ is equipped with a built-in power supply, operates as a standalone unit or can be controlled remotely through the ANSI E1.11 USITT DMX 512-A protocol.
2. Safety
Caution
- This product is for professional use only. It is NOT intended for domestic or outdoor use.
- The bright flash of light during power-up and continuous strobe effect may cause epileptic seizure.
- This product must be used with safety cable.
3. Cabling
Power Con connectors are used for power input. XLR 5-pin connectors are used for data signal from an external DMX control console. The chassis is ground bonded.
4. Mounting
A mounting bracket is built into the enclosure for overhead applications. Secure the fixture with a safety bond. A fixing hold is built into the enclosure. Optional accessories are also available for mounting Inspire™ light fixtures.
5. Optics
The Inspire Mini™ is built with a wide lens with a beam angle of ~65°. The optional Spreader Lens kit is available for changing the beam angle of any Inspire™ Light Fixture.
6. Control
The control functions are accessed through the LCD display at the rear of the fixture with 4 push buttons:
Power-Up Display:
On power-up, the display shows the Main Menu. The Main Menu shows the model
name, software version, DMX start address, set control mode, number of
channels assigned.
Display Mode:
The LCD display is backlit when you access the menu and turns off when left
undisturbed for 5 seconds.
Control Menu
To navigate the Control Menu options from the Main Menu,
- Use the Up and Down arrows to navigate the control menu options
- Press the Back arrow (Enter) to select a control menu option
- Press and hold the Back arrow (Enter) to save the setting
- Press Exit to return to the Main Menu
Main Menu DMX Address
From the Main Menu, press Enter to adjust the DMX start address
Control Mode
When DMX is Lost
If DMX is not detected, various output options can be selected:
Look Store
31 internal present FX Looks are available for stand-alone operation, 1-23 are
pre-programmed. To replay a Look in stand-alone operation, press Up/Down to
select Look Store, press Enter, press Up/Down to select the desired Look &
press Enter for 2 seconds to save settings. To replay a Look with a DMX
console, press Up/Down to Control Mode11& press Enter for 2 seconds. Use the
DMX console with the assigned channel to playback the various looks stored.
(1-31 looks in 1 single channel) Note: DMX has priority over internal Looks.
Looks can be recorded in the internal flash memory by users & will be
preserved on power down. Looks will be returned to default settings upon
reset. There are two ways to record a look: Simple, with DMX console &
Advanced, stand-alone. (DMX is unplugged): refer to user manual for control
details.
Technical
In this menu, the frequency setting of the fixture can be changed. The Inspire
Mini™ fixture has four frequency settings available – 1200, 2400, 4800, 9600.
This allows for the LED scan
rate to be synchronized with the video camera and avoid a flickering effect.
Reset to Default
In this menu, all control menu commands are reset to factory defaults:
7. Further Information
Please refer to the Chroma-Q® Inspire Mini™ manual for more detailed information. A copy of the manual can be found at the Chroma-Q® website www.chroma-q.com/support/downloads
Approvals & Disclaimer
The information contained herein is offered in good faith and is believed to
be accurate. However, because conditions and methods of use of our products
are beyond our control, this information should not be used in substitution
for customer’s tests to ensure that Chroma-Q® products are safe, effective,
and fully satisfactory for the intended end use. Suggestions of use shall not
be taken as inducements to infringe any patent. Chroma-Q® sole warranty is
that the product will meet the Chroma-Q® sales specifications in effect at the
time of shipment. Your exclusive remedy for breach of such warranty is limited
to refund of purchase price or replacement of any product
shown to be other than as warranted.
Chroma-Q® reserves the right to change or make alteration to devices and their functionality without notice due to on-going research and development.
The Chroma-Q® Inspire™ has been designed specifically for the lighting industry. Regular maintenance should be performed to ensure that the products perform well in the entertainment environment.
If you experience any difficulties with any Chroma-Q® products please contact your selling dealer. If your selling dealer is unable to help, please contact support@chroma-q.com. If the selling dealer is unable to satisfy your servicing needs, please contact the following for full factory service:
Outside North America:
Tel: +44 (0)1494 446000
Fax: +44 (0)1494 461024
support@chroma-q.com
North America:
Tel: +1 416-255-9494
Fax: +1 416-255-3514
support@chroma-q.com
For further information please visit the Chroma-Q® website at www.chroma-q.com.
Chroma-Q® is a trademark, for more information on this visit www.chroma-q.com/trademarks.
The rights and ownership of all trademarks are recognized
https://chroma-q.com/
References
- 📧support@chroma-q.com
- Home | Chroma Q | Award-Winning LED Lighting
- Home | Chroma Q | Award-Winning LED Lighting
- Chroma-Q | Trademarks and Copyrights
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>