SONY XS-680GS 2-Way Speaker Instructions

: June 12, 2024
: Sony

Table of Contents

Dimensions
Parts list
Precautions
Specifications
Mounting
- Before mounting
Connections
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SONY XS-680GS 2-Way Speaker

SONY XS-680GS 2-Way Speaker

Dimensions

Unit: mm (in)

Reference Point

Reference Plane

Reference Axis

Dimensions

Parts list

Precautions

Do not continuously use the speaker system beyond the peak power handling capacity.
Keep recorded tapes, watches, and personal credit cards using magnetic coding away from the speaker system to protect them from damage caused by the magnets in the speakers.
Please note the following when installing the units; otherwise malfunction and/or deterioration in sound quality may result.
- Do not touch the diaphragms and/or speaker cones by hand or with tools.
- Do not put your fingers through the holes of the frame.
- Do not drop foreign objects in the units.
Do not place this product close to medical devices.
- This product (including accessories) has magnet(s) which may interfere with pacemakers, programmable shunt valves for hydrocephalus treatment, or other medical devices. Do not place this product close to persons who use such medical devices. Consult your doctor before using this product if you use any such medical device.

If you cannot find an appropriate mounting location, consult your car dealer or your nearest Sony dealer before mounting.

Specifications

Speaker| Coaxial 2 way: Woofer 16 cm × 20 cm (6 in × 8 in) cone type Tweeter 2.0 cm (13/16 in) dome type
---|---
*Short-term maximum power1
Rated power
CTA 2031 RMS Power
Rated impedance| 230 W2
38 W2
40 W
4 Ω
Output sound pressure level*
Effective frequency range
Mass
Supplied accessories| 90 dB ± 2 dB (1 W, 1 m)2
45 Hz – 24 000 Hz*2
Woofer: Approx. 700 g
(1 lb 9 oz) per speaker
Parts for installation

Design and specifications are subject to change without notice.

1 “Short-term maximum power” may also be referred to as “Peak Power”.
2Testing Condition: IEC 60268-5 (2003-05)

Mounting

Before mounting

A depth of at least 57.5 mm (2 3 /8 in) is required to mount the woofer. Measure the depth of the area where you are to mount the speaker, and ensure that the speaker is not obstructing any other components of the car. Keep the followings in mind when choosing a mounting location:

Make sure that nothing is obstructing around the mounting location of the door (front or rear) where you are to mount the speaker.
A hole for mounting may already be cut out of the inner panel of the door (front or rear). In this case, you need to modify the board only.
If you are to mount this speaker system in the door (front or rear), make sure that the speaker terminals, frame or magnet do not interfere with any inner parts, such as the window mechanism in the door (when you open or close the window), etc.
Also make sure that the speaker grille does not touch any inner fittings, such as the window cranks, door handles, arm rests, door pockets, lamps or seats etc.
If you are to mount this speaker system in the rear tray, make sure that the speaker terminals, frame or magnet do not touch any inner parts of the car, such as the torsion bar springs (when you open or close the trunk lid), etc.
Also make sure that the speaker grille does not touch any inner fittings, such as seat belts, head rests, center brake lights, inner covers of the rear wipers, curtains or air purifiers, etc.

Connections

*1* Note
When releasing ⑦, push down on the catch firmly and release ⑦ carefully.
If excessive force is used, damage to the speaker or terminal cable may result.
2** White cord — Left speaker
Gray cord — Right speaker

Mounting from the car interior Decide the method ( , or ) to mount the unit depending on the type of the car and the installation location.

When mounting on the door panel

Mounting