CAMMHD B0CG37WJ8V Body Camera User Manual

June 16, 2024
CAMMHD

CAMMHD B0CG37WJ8V Body Camera

CAMMHD-B0CG37WJ8V-Body-Camera-product

Product Information

Product Function Diagram

  • Indicator Light: Indicates the camera’s status
  • Night Vision Light: Provides infrared or LED white light for low-light environments
  • Reset Hole: Used to reset the camera
  • Menu/OK Key: Used to navigate menus and confirm selections
  • Up/Important Mark Key: Used to mark important moments during video recording
  • Microphone: Captures audio during recording
  • LCD Screen: Displays camera settings and recorded content
  • Return Key: Used to go back or exit menus
  • Play/Down Key: Used to playback recorded content or scroll down in menus
  • Video Key: Starts and stops video recording
  • Photo Key: Takes photos
  • Red and Blue Alarm Key: Activates an alarm or emergency feature
  • Charging or Transferring Data: Connects the camera for charging or data transfer
  • Audio Key: Starts and stops audio recording
  • Power Key: Turns the camera on and off

Product Usage Instructions

Power On/Off

  • Press and hold the power key for 3 seconds to turn on the camera.
  • Press and hold the power key for 3 seconds to turn off the camera.

Record Video

  • After the camera is turned on and in standby preview state, short press the video key to start recording.
  • Press the record key again to stop recording.
  • The video file is automatically saved.
  • To mark a key moment during recording, short press the up key. The key symbol will appear in the middle of the display screen.
  • The marked video will not be automatically overwritten when loop recording is turned on.
  • To cancel marking a video, stop the recording.

Take Pictures

  • After the camera is turned on and in standby preview state, short press the camera key to take pictures.
  • In dark environments at night, turn on the camera’s infrared light or LED white light to take pictures.
  • Press the camera key to take a snapshot during video recording.

Record Audio

  • In the standby preview state, short press the recording key to start recording audio.
  • The screen will display the recording interface and the recording time.

Stealth Mode
In stealth mode, the camera beep and indicator light are turned off. The IR Filter cannot be used at the same time.

IR Filter Function

  • Short press the return key to manually turn on/off the infrared light.
  • Turn on the infrared light when the external light is dim.
  • In the infrared mode, the screen will display in black and white.
  • The camera supports automatic switching of infrared night vision function, which can be set in the menu.

Motion Detection
When there is a moving object within the camera’s shooting range, it will automatically start recording and save the footage.

Lock Sign

  • During video recording, short press the up key to mark a video.
  • A key symbol will appear in the middle of the display.
  • Marked videos will not be automatically deleted when loop recording is turned on.

Password Protection

  • When password protection is turned on, the camera display will prompt for a password when connected to a computer, entering the setting menu, or playing back content.
  • If the password is entered incorrectly, certain actions like reading the disk, modifying parameters in the setting menu, or viewing playback will be restricted.

Continuous Shooting

In standby state, press the camera key once to enable continuous shooting. The camera will take multiple photos continuously.
In the off state, only one photo will be taken.

Video Length
Refers to the duration of each video segment when recording. The camera will automatically save recorded videos as segments of a set number of minutes.

Playback
In standby mode, short press the playback key to enter the playback interface and view recorded content.

Specifications

  • Resolution: [Insert resolution]
  • Storage Capacity: [Insert storage capacity]
  • Battery Life: [Insert battery life]
  • Weight: [Insert weight]
  • Dimensions: [Insert dimensions]
  • Connectivity: [Insert connectivity options]

FAQ

  • Q: How do I reset the camera?
    A: Locate the reset hole on the camera and use a pin or paperclip to press and hold the reset button for a few seconds.

  • Q: How do I turn on the infrared light for night-time photography?
    A: In the standby preview state, short press the return key to manually turn on the infrared light. Make sure to enable the infrared mode in the settings menu.

  • Q: Can I mark important moments during video recording?
    A: Yes, you can mark key moments by short pressing the up key during video recording. The marked videos will not be automatically overwritten when loop recording is turned on.

  • Q: How long can the camera record videos?
    A: The camera will automatically save recorded videos as segments of a set number of minutes per segment. The exact duration depends on the video length setting in the camera’s menu.

  • Q: How do I access the playback mode?
    A: In standby mode, simply short press the playback key to enter the playback interface and view recorded content.

Product Function Diagram

CAMMHD-B0CG37WJ8V-Body-Camera- \(1\) CAMMHD-
B0CG37WJ8V-Body-Camera- \(2\)

Quick To Use

  • Power On/Off
    Press and hold the power key for 3 seconds to turn on the camera, and press and hold the power key for 3 seconds to turn off the camera.

  • Record Video
    After the camera is turned on, in the standby preview state, short press the “video key” to start recording, press the record key again to stop recording during the recording process, and the video file is automatically saved. During the video shooting process, short press the “up key”, and the key symbol appears in the middle of the display screen, which is to mark the key file. The marked video will not be automatically overwritten when the loop recording is turned on. When the recording stops, the marked Cancel automatically.

  • Take Pictures
    After the camera is turned on, in the standby preview state, short press the camera key to take pictures. In the dark environment at night, you need to turn on the camera’s infrared light or LED white light to take pictures. Press the camera key to take a snapshot during video recording.

  • Record Audio
    In the standby preview state, short press the recording key to record. In the recording state, the screen will display the recording interface and the recording time at the same time.

  • Stealth Mode
    In the stealth mode,the camera beep and indicator light are turned off. IR Filter cannot be use at the same time.

  • IR Filter Function
    Short press the return key to manually turn on/off the infrared light. Generally, when the external light is dim, the infrared light can be turned on. In the infrared mode, the screen is black and white, which is a normal phenomenon. At the same time, the camera supports automatic switching of infrared night vision function, which needs to be set in the menu.

  • Motion Detection
    When there is a moving object within the shooting range of the camera, the camera will automatically start recording and save it.

  • Lock sign
    During video recording, short press the up key, and a key symbol will appear in the middle of the display, such videos will not be automatically deleted when loop recording is turned on Password Protection
    When the password protection is turned on, when the camera is connected to the computer/enters the setting menu/plays back on the camera, the camera display will prompt to enter the password. If the password is entered incorrectly, the disk cannot be read/enter the setting menu to modify parameters/playback cannot be viewed.

  • Continuous Shooting
    Continuous shooting means that in the standby state, press the camera key once, the camera can take multiple photos continuously, and in the off state, it means no continuous shooting, and only one photo is taken.

  • Video Length
    The video length refers to the time when recording a video, the recorded video will be automatically saved as a set number of minutes per segment.
    Playback
    In standby mode, short press the playback key, the camera enters the playback interface.

  • Red and Blue Alarm Lights
    Short press the key to turn on the camera alarm light and sound, and the red and blue lights can display the warning function.Press again and the alarm sound disappears. Press the key for the third time, and both the alarm light and sound will disappear.

Parameter Settings
The menu setting can set the system parameters. In the standby state, short press the menu key to enter the setting menu, and use the ” up/down” key to select the item. After adjusting the item to be set, press the OK key to enter the parameter selection.

  • Resolution
    There are 5 options for video resolution:
    1440P/1296P/1080P/720P/480P. The larger the selected value, the clearer the video, and the video will take up more memory card space, and the body camera will consume power faster

  • Photo Size
    There are 6 options for photo size:
    48M/34M/26M/4M/2M/1M. The larger the selected value, the clearer the photos, and the photos will take up more memory card space.

  • Video Length
    There are 4 options for video length:
    5min/10min/15min/20min. The video will be saved continuously according to the set time segments. It is convenient to quickly target specific videos, and ensure that the body camera plays locally and files are copied to the computer smoothly.

  • Continuous Shooting
    There are 4 options for video length:
    Off/3P/5P/10P.Select “off” to take only one photo at a time. Other options mean that if you press the photo button once, the body camera will take the corresponding number of photos continuously.

  • Post-Record
    There are 5 options for photo size:
    Off/5sec/30sec/1min/5min.When you pause the recording, the body camera will continue to record the video according to the time you set, and you can also manually pause the supplementary recording at any time. CAMMHD-B0CG37WJ8V-
Body-Camera- \(5\)

  • Loop recording
    When the camera memory is full, the camera will automatically delete the first recorded video clip; in the closed state, when the camera is full, the system will prompt that the memory is insufficient.

  • IR Filter
    Manual mode: Press the back key once during standby or recording, and press the back key again after use to restore the color.Automatic mode: When the light is insufficient or completely dark, the body camera will automatically turn on the night vision, and when the light returns to bright, the body camera will automatically exit the night vision.CAMMHD-B0CG37WJ8V-Body-
Camera- \(7\)automatically exit the night vision.
    When the date stamp is turned on, all videos and pictures recorded by the body camera will have the camera device number and the specific recording time. You can choose to close according to your needs.

  • Motion Detection
    When the motion detection is turned on, the camera will automatically start shooting when there is a moving object within the shooting range of the camera. When no moving object continues to enter the shooting range, the camera will automatically standby. CAMMHD-B0CG37WJ8V-Body-Camera-
\(9\)

  • Dash Car Mode
    Turn on the dash car mode, the body camera will automatically turn on and record video when connected to the power supply, if the power is disconnected, it will automatically shut down and stop recording video.

  • Key Tone
    Turn on the key sound and operate the camera, press any key, and the camera will emit a corresponding prompt sound; turn off the key sound, press any key on the camera and you will not hear the key’s prompt sound.

  • Video Sound
    Turn on Video Sound, the video you record with the body camera will retain the sound; Turn off Video Sound, the video you record will not retain any sound.

  • Volume
    Three options are available:
    Low/Medium/High. You can set the volume level according to the specific usage scenario, and the default setting is High. CAMMHD-B0CG37WJ8V-Body-Camera-
\(11\)

  • Stealth Mode
    Turn on the stealth mode, your body camera will not make any sound, nor will there be any indicator lights flashing, and you will not be able to use infrared night vision and red and blue strobe alarms. Default is off.

  • Password Protection
    Turn on the password protection, and you need to enter the password when you enter the menu again or connect to the computer to transfer data. The initial password of the camera is: 000000. The default is off. CAMMHD-B0CG37WJ8V-
Body-Camera- \(13\)

  • Change Password
    The default password is: 000000. You can define the camera password as numbers or letters according to your needs. CAMMHD reminds you that in order to ensure the normal use of the camera, please remember your customized camera password.

  • Police ID
    You can customize any 6-digit police officer number composed of numbers and letters. Suitable for group use. If you need to purchase more than one camera, please contact CAMMHD.

  • Device ID
    You can customize any 7-digit police officer number composed of numbers and letters. Suitable for group use. If you need to purchase more than one camera, please contact CAMMHD.

  • LCD Auto Off
    There are 4 options for LCD Auto Off:
    Off/30sec/1min/ 2min.After selection, the body camera will automatically turn off the screen within the corresponding time without any operation. If you choose Off, the body camera will always turn on te screen.

  • Auto Power Off
    After selection, if there is no operation, the body camera will automatically shut down within the corresponding time. If you select “Off”, the body camera will always be in standby mode. CAMMHD-B0CG37WJ8V-Body-Camera-
\(15\)

  • Date/Time
    You can set the corresponding time/date according to your needs. Please note that after setting the time, all videos/pictures/audio recordings recorded by the body camera can be traced back to the corresponding time of occurrence.

  • Language
    You can set the language of the body camera to Engl ish/S Chinese/T Chinese/Japanese/German/Frenc h/Spanish/Italian/Dutch. The default setting is Eng lish. CAMMHD-B0CG37WJ8V-Body-Camera- \(16\)

  • Format
    If you don’t need any data in the body camera, you can choose to format and recover the storage space of the body camera. Please note that any of your video/picture/recording files cannot be restored after formatting, please use with caution. CAMMHD-B0CG37WJ8V-Body-Camera- \(17\)

  • Default Settings
    After selecting the default setting, all menu options of your body camera will restore the most original settings.

  • Version
    If there is any problem with your body camera, please provide the version information to CAMMHD, so that CAMMHD can solve the problem for you more efficiently.

Data Transmission
After the password protection is turned on and the camera is turned on, use the USB data cable to connect the camera to the computer. The left interface will pop up on the camera display screen. Enter the initial password 000000 to enter the camera’s U disk, and find the removable disk in the Connect the camera to the computer with a USB cable. The interface on the left will pop up on the camera display. Find the removable disk in your computer. After entering the U disk, open the folder shown on t he left, including VIDEO/PHOTO/LOG/AUDIO files, w hich can be viewed/downloaded/shared as needed

Nanjing AiCheWu Intelligent Technology co.,Ltd

Address : Dongheng International Building, Shuanglong Road, Jiangning District,Nanjing City, Jiangsu Province, China
Email : [email protected]

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

CAMMHD User Manuals

Related Manuals