Kensun A58B AIR COMPRESSOR INSTRUCTION MANUAL
- June 1, 2024
- Kensun
Table of Contents
Kensun A58B AIR COMPRESSOR
Dear friend,
We proudly present you with our latest inflator for home or vehicle use. After
much research and experience, we finally have developed a product to be
pleased with. This inflator was created with you in mind and we hope you will
be completely satisfied with the quality, design, and performance.
If you are happy, please tell your friends. If you have any issues with the
product or our service, please tell us. You can reach us at
[email protected] or toll-free
at 1-855-Kensun-care (1-855-536-7862)
As an innovative company, we always want to hear your complaints, comments,
and ideas. We do our best to bring you a quality product along with unrivaled
customer service. You are guaranteed to be fully satisfied after being treated
by our professional and friendly support team.
Your product review is crucial to the success of our business. We will be very
grateful if you will do us a favor and take the time to write us a product
review on Amazon. To do so, you can go to or find the order in “your orders”
and click “write a product review”.
You can then select the number of stars and write a few words about your
experience. It means a lot to us and lets other shoppers know about this great
product. Enjoy!
Your friends at Kensun.
The label on your tool may include the following symbols:
- …direct current
- ∼ alternating current
INTRODUCTION
Your Inflator is designed to be used in and around the home using its 110-volt cord or in most vehicles with a standard 12-volt socket using its 12-volt adaptor cord. As with any battery-operated appliance, when the Inflator is used in 12 volt mode, performance will vary directly with the battery’s state of charge. Naturally, the higher the current drawn by the Inflator, the more the battery power will be decreased.
Specification
| Specification | Detail |
|---|---|
| Voltage | DCI2V – ACTIOV |
| Max Current | <10A |
| Inflation Time at AC | 6.5 mins |
| Inflation Time at DC | 6.5 mins |
| Max Pressure | 100 PSI |
| AC Cable Length | 71 ¾ inches |
| DC Cable Length | 110 ¼ inches |
| Hose Length | 19 ½ inches |
| Operation Temperature | -4~140°F |
| Dimensions | 10.2 x 4.7 x 7.8 inches |
| Net Weight | 3.3 pounds |
| Continuous Working Time | No more than 30 mins |
| Accuracy of Gauge | ±3 PSI |
FUNCTIONAL DESCRIPTION
OPERATING INSTRUCTIONS
WARNING: Risk of Bursting. Too much air pressure causes a hazardous risk of bursting. Check the manufacturer’s maximum pressure rating for objects being inflated.
-
TO INFLATE TIRES:
Screw connector on air valve stem -
Plug the power cord into power accessory outlet
-
Press AC or DC button. As soon as the pressure reaches the value you want, press AC or DC button again.
ACCESSORY USAGE
- Screw the air hose connector on the desired nozzle accessory (tapered nozzle or needle inflator tightly that the air won’t leak.
- Firmly insert the attached nozzle accessory into the inflation port of the object to be inflated. NOTE:
The extension and standard tapered nozzles and the needle inflator nozzle are provided with your Inflator.
BUTTONS
The AC and DC buttons are located on the front of the Inflator just above the pressure gauge.
110V AC Mode
- Always fully extend the 110V AC cord before each use.
- To turn the Inflator on, plug in the 110 volt cord and press the “AC” button.
- To turn the Inflator off, depress the “AC” button.
12V DC Mode
- Always fully extend the 12V DC cord before each use.
- To turn the inflator on, plug the 12 volt adaptor into your vehicle’s 12 volt accessory socket and press “DC” button.
- To turn the inflator off, depress the “DC” button.
HOSE AND CORD STORAGE
The hose and cords are stored in the storage compartment on the back and right
of the Inflator.
The compartment is designed for storing the hose and cord safely inside when
the inflator is not used.
MAINTENANCE
Use only mild soap and a damp cloth to clean the tool. Never let any liquid
get inside the tool; never immerse any part of the tool into a liquid.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustments (other than those listed in this manual) should be performed
by authorized service centers, always using identical replacement parts.
TROUBLESHOOTING
Unit will not start.
| Problem | Possible Cause | Possible Solution |
|---|---|---|
| Tool not working | Wrong button used | Make sure you are using a home AC plug |
and the AC button is pressed and vice versa.
Tool not powering on| Fuse in 12-volt adaptor blown| Replace the fuse.
Tool not inflating| Cord not plugged in| Plug tool into a working outlet.
Tool repeatedly stops working| Circuit fuse is blown| Replace circuit fuse.
(If the product repeatedly causes the circuit fuse to blow, discontinue use
immediately and have it serviced at a service center or authorized servicer.)
Tool not functioning properly| Cord is damaged| Have the cord replaced at a
Service Center or Authorized Servicer.
Read all instructions before operating product. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
GENERAL SAFETY RULES
SAVE THESE INSTRUCTIONS
- KEEP CHILDREN AWAY.
- Do not let children play with the tool or extension cord. They should be keptaway from work area.
- STORE IDLE TOOLS.
- When notin use, tools should be stored in dry, and high or locked-up place – out of reach ofchildren.
- DON’T FORCE TOOL.
- It will do the job better and safer at the rate for which it was intended.
- USE THE RIGHT TOOL.
- Don’t force small tool or attachment to do the job of a heavy-duty tool. Don’t use tool for purpose not intended.
- AVOID UNINTENTIONAL STARTING.
- Don’t carry tool with finger on switch. Be sure switch is off when plugging in.
EXTENSION CORDS.
Make sure your extension cord is in good condition. When using an extension
cord, be sure to use one heavy enough to carry the current your product will
draw. An undersized cord will cause a drop in line voltage resulting in loss
of power and overheating.
STAY ALERT.
Watch what you are doing. Use common sense. Do not operate tool when you are
tired.
DO NOT OPERATE
portable electric tools near flammable liquids or in gaseous or explosive
atmospheres. Motors in these tools normally spark, and the sparks might ignite
fumes.
ADDITIONAL SAFETY WARNINGS
WARNING! RISK TO BREATHING:
The compressed air from your inflator is not safe for breathing. Never inhale
air from your inflator or from a breathing device connected to the inflator.
WARNING! RISK OF ELECTRIC SHOCK:
- Turn off and unplug inflator when not in use, when cleaning, or when changing nozzles.
- Do not expose inflator to rain or wet conditions.
- Water entering the inflator will increase the risk of electric shock.
WARNING! RISK OF FALLING:
Since the vibration produced by the inflator may cause it to “walk”, do not operate on a high shelf or another surface. Operate at ground or bench level.
WARNING! RISK OF UNSAFE OPERATION:
- Do not modify or attempt to repair. Never drill into, weld, or make any modifications to the inflator or its attachments.
- Do not operate inflator when car engine is running.
- Operate only with the accessories included or those rated for 100 p.s.i. or higher. The use of any accessory not recommended for use with this tool could be hazardous.
- Never “horseplay”. High-pressure air is dangerous. Don’t direct air flow at yourself or others.
WARNING! RISK OF FIRE:
- Inflator can become hot during use. Allow inflator to cool 30 minutes before storing away.
- Never carry the inflator by the hose.
WARNING! This product or its power cord contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
California Proposition 65
PLEASE NOTE: If the compressor has been working nonstop for more than 20
minutes, please give it a 10 minute break to cool off before using further.
If you need to fill up a fire from 0 PSI, you can use a jack to lift the car
which will make it easier to inflate the tire or take 5-10 minute breaks if
the compressor shuts off especially in hot weather.
WARNING! The use of any accessory not recommended for use with this
compressor could be hazardous.
Service Information
The Kensun Customer Service Center is staffed with friendly and trained
personnel to provide customers with efficient and reliable service and
support.
Whether you need technical advice, repair, or genuine factory replacement
parts contact Kensun at: 1-855-536-7862
[email protected]
Please have your order number available when calling for support. In most
cases, a Kensun representative can resolve the problem over the phone. If you
have a suggestion or comment, give us a call.
Your feedback is vital to Kensun.
Thank you for choosing Kensun!
FAQs
What is the primary function of the Kensun A58B Air Compressor?
The primary function of the Kensun A58B Air Compressor is to inflate tires and other inflatables using both 12V DC and 110V AC power sources.
What is the air flow capacity of the Kensun A58B Air Compressor?
The air flow capacity of the Kensun A58B Air Compressor is 20 liters per minute.
What is the voltage range of the Kensun A58B Air Compressor?
The Kensun A58B Air Compressor operates on both 12V DC and 110V AC power sources.
What is the noise level of the Kensun A58B Air Compressor?
The Kensun A58B Air Compressor operates at a noise level of 92 decibels.
What is the hose length of the Kensun A58B Air Compressor?
The hose length of the Kensun A58B Air Compressor is 129.92 inches.
What is the weight of the Kensun A58B Air Compressor?
The weight of the Kensun A58B Air Compressor is 4.01 pounds.
What is the warranty period for the Kensun A58B Air Compressor?
The Kensun A58B Air Compressor comes with a 2-year warranty.
What is the special feature of the Kensun A58B Air Compressor?
The Kensun A58B Air Compressor features a unique AC/DC option, allowing it to be used with both 12V DC and 110V AC power sources.
What is the recommended use for the Kensun A58B Air Compressor?
The Kensun A58B Air Compressor is recommended for tire inflation and other inflatables.
What is the power source of the Kensun A58B Air Compressor?
The Kensun A58B Air Compressor is powered by both 12V DC and 110V AC sources.
What is the air flow capacity of the Kensun A58B Air Compressor in liters per minute?
The air flow capacity of the Kensun A58B Air Compressor is 20 liters per minute.
What is the voltage of the Kensun A58B Air Compressor?
The Kensun A58B Air Compressor operates on both 12V DC and 110V AC power sources.
What is the noise level of the Kensun A58B Air Compressor in decibels?
The Kensun A58B Air Compressor operates at a noise level of 92 decibels.
What is the hose length of the Kensun A58B Air Compressor in inches?
The hose length of the Kensun A58B Air Compressor is 129.92 inches.
What is the weight of the Kensun A58B Air Compressor in pounds?
The weight of the Kensun A58B Air Compressor is 4.01 pounds.
Video- Kensun A58B AIR COMPRESSOR
Download This manual:Kensun A58B AIR COMPRESSOR INSTRUCTION MANUAL