FUJIFILM 16670168 Fujinon Lens XF 27mm F2.8 R WR Owner’s Manual
- June 6, 2024
- Fujifilm
Table of Contents
Fujinon Lens XF 27mm F2.8 R WR
OWNER’S MANUAL
For Your Safety
Be sure to read these notes before use
Safety Notes
Thank you for your purchase of this product. For repair, inspection, and
internal testing, contact your Fujifilm dealer.
- Make sure that you use the lens correctly. Read these safety notes and the Camera Owner’s Manual carefully before use.
- After reading these safety notes, store them in a safe place.
About the Icons
The icons shown below are used in this document to indicate the severity of
the injury or damage that can result if the information indicated by the icon
is ignored and the product is used incorrectly as a result.
WARNING| This icon indicates that death or serious injury can result if
the information is ignored.
---|---
CAUTION| This icon indicates that personal injury or material damage can
result if the information is ignored.
The icons shown below are used to indicate the nature of the instructions which are to be observed.
| Triangular icons tell you that this information requires attention
(“Important”).
---|---
| Circular icons with a diagonal bar tell you that the action indicated is
prohibited (“Prohibited”).
| Filled circles with an exclamation mark indicate an action that must be
performed (“Required”).
WARNING
Do not use in the bathroom or shower| Do not immerse in or expose to
water. Failure to observe this precaution can cause a fire or electric
shock.
Do not disassemble| Do not disassemble, Failure to observe this
precaution can cause fire, electric shock, or injury due to product
malfunction.
Do not touch internal parts| Should the case break open as the result of a
fall or other accident, do not touch the exposed parts. Failure to observe
this precaution could result in electric shock or in injury from touching the
damaged parts. Remove the camera battery immediately, taking care to avoid
injury or electric shock, and take the product to the point of purchase for
consultation.
WARNING
| Do not place on unstable surfaces. The product may fall, causing
injury.
| Do not view the sun through the lens or camera viewfinders. Failure to
observe this precaution can cause permanent visual impairment.
CAUTION
| Do not use or store in locations that are exposed to steam, or smoke or
are very humid or extremely dusty. Failure to observe this precaution can
cause fire or electric shock.
| Do not leave in direct sunlight or in locations subject to very high
temperatures. such as in a closed vehicle on a sunny day. Failure to observe
this precaution can cause a fire.
CAUTION
| Keep out of the reach of small children. This product could cause injury in
the hands of a child.
| Do not handle with wet hands. Failure to observe this precaution can cause
electric shock.
| Keep the sun out of the frame when shooting backlit subjects. Sunlight
focused into the camera when the sun is in or close to the frame can cause
fire or burns.
| When the product is not in use, replace the lens caps and store them
out of direct sunlight. Sunlight focused by the lens can cause fire or burns.
| Do not carry the camera or lens while they are attached to a tripod. The
product can fall or strike other objects, causing injury.
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
FCC Statement: This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
CAUTION: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between Fc the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- You are cautioned that any changes or modifications not expressly approved in this manual could void the user’s authority to operate the equipment.
Notes on the Grant: To comply with Part 15 of the FCC Rules, this product
must be used with a Fujifilm-specified ferrite-core AN cable, USB cable, and
DC supply cord.
*For Customers? Canada
CAN ICES-3 (B)/NMB-3(B)
CAUTION:** This Class B digital apparatus complies with Canadian ICES-003.
IMPORTANT SAFETY INSTRUCTIONS
-
Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water (excluding waterproof products).
-
Clean only with a dry cloth.
-
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
-
Do not install near any heat sources such as ra-
radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. -
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
-
Only use attachments/accessories specified by the manufacturer.
-
Unplug this apparatus during lightning storms or when unused for long periods of time.
-
Refer all servicing to qualified service personal. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Disposal of Electrical and Electronic Equipment in Private Households
In the European Union, Norway, Iceland, and Liechtenstein: This symbol on
the product, or in the manual and in the warranty, and/or on its packaging
indicates that this product shall not be treated as household waste. Instead,
it should be taken to an applicable collection point for the recycling of
electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences to the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product.
The recycling of materials will help to conserve natural resources. For more
detailed information about recycling this product, please contact your local
city office, your household waste disposal service, or the shop where you
purchased the product.
In Counties Outside the European Union, Norway, Iceland, and
Liechtenstein: If you wish to discard this product, including the batteries
or accumulators, please contact your local authorities and ask for the correct
way of disposal.
Australian RCM
Before Using This Product
The lens may not perform as expected and some features may not be available with an outdated lens or camera firmware. Be sure to update the lens and camera firmware to the latest versions. Instructions on viewing firmware version information and updating firmware are available from the following website: https://fujifilm-x.com/support/download/firmware If you do not have access to a computer, support is available from the local distributor listed in the “FUJIFILM Worldwide Network” material provided with your camera.
Product Care
- When using a lens hood, do not pick up or hold the camera using only the hood.
- Keep the lens signal contacts clean.
- Use a blower to remove dust and lint from the glass surfaces of the lens or filter. To remove smudges and fingerprints, apply a small amount of lens cleaner to a soft, clean cotton cloth or lens-cleaning tissue and clean from the center outwards using a circular motion, taking care not to leave smears or touch the glass with your fingers.
- Never use organic solvents such as paint thinner or benzene to clean the lens.
- Attach the front and rear caps when the lens is not in use.
- Store the lens and filter in cool, dry locations to prevent mold and rust. Do not store in direct sunlight or with naphtha or camphor mothballs.
- Keep the lens dry. Rusting can cause irreparable damage. Wipe off rain and water droplets.
- Leaving the lens in extremely hot locations could cause damage or warping.
Parts of the Lens
1. Hood cap
2. Lens hood
3. Focus ring
4. Aperture ring
5. Mounting marks(focal length)| 6. Aperture ring lock release
7. Lens signal contacts
8. Front lens cap
9. Rear lens cap
The lens mount includes a rubber ring to ensure that the lens remains dust-
and splash-proof. The ring can be replaced for a fee at any Fujifilm service
center.
---|---
Supplied Accessories
- Front lens cap
- Rear lens cap
- Lens hood
- Hood cap
- Lens wrapping cloth
Attaching the Lens
See the camera manual for information Remove the caps as shown. on attaching
and removing lenses.
This product is for use exclusively with the FUJIFILM X mount. It is not
compatible with the G mount or with X mount film cameras.
Removing the Caps
Aperture ring
At settings other than A, you can adjust the aperture by rotating the lens
aperture ring (exposure modes A and M).
To select another value after selecting A, press the aperture ring lock re-
lease while rotating the aperture ring.
Attaching the Hood
When attached, lens hoods reduce glare and protect the front lens element. Use the hood cap in place of the front lens cap to cap the lens with the hood in place.
Warning
If you attach the hood too tightly after attaching a filter to the lens,
the filter may remain stuck to the hood when the hood is removed. Do not
attempt to forcibly separate the hood and filter, as the filter threads could
injure your hands. Cover both the hood and filter with silicone jar openers or
the like and unscrew them using the palms of your hands.
Specifications
| Type | XF27mmF2.8 R WR |
|---|---|
| Lens construction | 7 elements in 5 groups (1 aspherical element) |
| Focal length (35 mm format equivalent) | f=27 mm (41 mm) |
| Angle of view | 55.5° |
| Max. aperture | f/2.8 |
| Min. aperture | f/16 |
Aperture control
Number of blades
Stop size| 7 (rounded diaphragm opening)
1/3 EV (total 16 stops)
Minimum focus distance (measured from the focal plane)| 34 cm
Max. magnification| 0.1 x
External dimensions: Diameter x Length (approx.) distance from the front of
the lens to lens mount flange| e62 x 23 mm
Weight* (approx.)
- excluding caps and hoods| 84g
Filter size| Ø39 mm
Improvements may result in unannounced changes to specifications
andappearance.
Owing to how this lens is constructed, the “Distance indicator” displayed by
the camera may in some cases differ from the actual focus distance. Use the
“Distance indicator” as a guide only.
FUJIFILM Corporation
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO
107-0052, JAPAN
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>