milwaukee M12 HH BLACK9 Heated Hoodie User Manual
- June 6, 2024
- Milwaukee
Table of Contents
OPERATOR’S MANUAL
Cat. No.
M12 HH BLACK9
M12 HH GREY9
M12 HH BLUES
M12™ HEATED HOODIE AND M12™ BATTERY HOLDER
WARNING
To reduce the risk of injury, the user must read and understand the
operator’s manual.
GENERAL PRODUCT SAFETY A WARNINGS
W ARNING Read all safety warnings and instructions. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. Save all warnings and instructions for future reference.
WORK AREA SAFETY
- Keep work area clean and well-lit. Cluttered or dark areas invite accidents.
ELECTRICAL SAFETY
- Do not expose the heated hoodie to rain or wet conditions. Water will increase the risk of electric shock.
- Do not abuse the power cable. Never use the cord for carrying, pulling, or unplugging the heated hoodie. Keep cord away from heat, oil, sharp edges, or moving parts.
PERSONAL SAFETY
-
Stay alert, watch what you are doing, and use common sense when using the heated hoodie. sence of rugs, alcohol, or medication. A moment of inattention may result in serious personal injury.
POWER TOOL USE AND CARE -
Do not use the heated hoodie if the power button does not turn it on and off. Any heated hoodie that cannot be controlled with the power button is dangerous and must be repaired.
-
Disconnect the battery pack from the heated hoodie before storing it. Such preventive safety measures reduce the risk of starting the heated hoodie accidentally.
-
Store out of the reach of children and do not allow persons unfamiliar with these instructions to operate the heated hoodie. The heated hoodie can be dangerous in the hands of untrained users.
-
Maintain a heated hoodie. Check for breakage of parts and any other condition that may affect the heated hoodie’s operation. If damaged, have the heated hoodie repaired before use.
-
Use the eaten hoodie in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the heated hoodie for operations different from those intended could result in a hazardous situation.
BATTERY TOOL USE AND CARE
- Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
- Use heated hoodies only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
- When the battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
- Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or bumps.
SERVICE
- Have your heated hoodie serviced by a qualified repair person using only identical replacement
parts? This will ensure that the safety of the heated hoodie is maintained.
SPECIFIC SAFETY RULES FOR HEATED HOODIE
Read instructions carefully.
Use:
- Do not use this heated hoodie with an infant, child, a helpless person, or anyone insensitive to heat, such as a person with poor blood circulation.
- If you have a medical condition making you sensitive to overheating, or you use any personal medical devices, consult the device manufacturer and/or your physician to determine if the use of this product is appropriate.
- Never use if the inner liner is wet.
- Heating elements are not recommended to touch bare skin.
- Shut off the power immediately if discomfort occurs.
- Do not allow the cords to be pinched.
- If the improper operation of this heated hoodie is observed, discontinue its use immediately and contact a MILWAUKEE ® service facility for repair.
- Do not use pins. They may damage the electrical wiring.
Care:
- Before washing, disconnect and remove the battery pack and battery holder from the battery holder pocket. Push the power cord completely into the battery holder pocket and zip pocket closed.
- Follow Care Instructions on hoodie tags. Machine wash, Gentle Cycle in warm water. Tumble Dry Low Heat.
- Do not bleach.
- Do not iron.
- Do not wring or twist.
- Do not dry clean. Do not use dry-cleaning fluid on this heated hoodie. Do not bleach. Cleaning solvents may have a deteriorating effect on the insulation of the heating element.
- Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE ® service facility for a replacement.
SYMBOLOGY****
| Volts
---|---
| Direct Current
| Machine wash, gentle cycle in warm water
| Do not bleach
| Do not wring or twist
| Tumble dry, low heat
| Do not iron
| Do not dry clean
| Regulatory Compliance Mark (RCM). This product meets applicable regulatory
requirements.
ADDITIONAL BATTERY SAFETY RULES
**WARNING To reduce the risk of fire, personal injury, and product
damage due to a short circuit, ever immerse your tool, battery pack, or
charger in fluid or allow fluid to flow inside them. Corrosive or conductive
fluids, such as seawater, certain industrial chemicals, and bleach or bleach-
containing products, etc., can cause a short circuit.
WARNING** Do not charge non-rechargeable batteries.
SPECIFICATIONS
Cat. No. ………………………………. M12 HH BLACK9 M12 HH GREY9 M12 HH BLUEX
Volts…………………………………………………… 12V DC
Battery Type ………………………………………….M12™
Charger Type…………………………………………M12™
FUNCTIONAL DESCRIPTION
1. Power button High: Red LED Medium: White LED Low: Blue LED| 2. Battery
holder
3. Power cable port
4. Battery holder pocket
5. Power cable
---|---
ASSEMBLY
WARNING Recharge only with the charger specified for the battery. For
specific charging instructions, read the operator’s manual supplied with your
charger and battery.
Inserting/Removing the Battery
To insert the battery, slide the pack into the body of the battery holder.
Make sure it latches securely into place. Insert the power cable (from inside
the battery holder pocket) into the power cable port on the battery holder.
Place the battery holder into the pocket and close the pocket with zipping. To
remove the battery, push in the release buttons and pull the battery pack out
of the holder.
OPERATION
The power button is located on the upper left side of the hoodie. The button is on the outside of the hoodie on Cat. No.
- M12 HH BLACK9
- M12 HH GREY9
- M12 HH BLUES
To turn on, press and hold the heated hoodie power button (1 to 2 seconds). The hoodie will turn n to High and the red LED will be illuminated. The temperature setting can be adjusted at any time by pressing the heated hoodie power button. Each press will cycle through the heated hoodie’s temperature settings. To turn off the heated hoodie, press and hold the heated hoodie power button until the LED turns off (1 to 2 seconds). If the heated hoodie turns off unexpectedly, check connections and charge the battery pack.
CARE
WARNING To reduce the risk of injury, always unplug the charger and
remove the battery pack and battery holder from the heated hoodie before
performing any maintenance. Never disassemble the heated hoodie, battery pack,
or charger. Contact a MILWAUKEE° service facility for ALL repairs. If the
heated hoodie does not start or operate properly with a fully charged battery
pack, clean the contacts on the battery pack. If the heated hoodie still does
not work properly, return the heated hoodie, charger, and battery pack, to a
MILWAUKEE:- service facility for repairs.
**WARNING reduces the risk of personal injury and damage,
disconnect and remove the battery pack and battery holder from the battery
holder pocket before washing. Never immerse your battery holder, battery pack,
or charger In a liquid or allow a liquid to flow inside them.
To clean the heated hoodie:**
- Remove the battery pack and battery holder.
- Push the power cord completely into the battery holder pocket and zip pocket closed.
- Machine wash, Gentle Cycle in warm water. Do not use bleach. Do not dry clean. Do not wring or twist.
- Tumble Dry on Low Heat. Do not iron.
ACCESSORIES
WARNING Use only recommended accessories. Others may be hazardous. For a
complete listing of accessories, go online to
milwaukeetool.com.au/
milwaukeetool.co.nz or contact a distributor.
WARRANTY – AUSTRALIA and NEW ZEALAND
Please refer to Australian and New Zealand warranty supplied with the tool.
This warranty applies only to products sold by authorized dealers in Australia
and New Zealand.
SERVICE – AUSTRALIA and NEW ZEALAND
MILWAUKEE® prides itself in producing a premium quality product that is
Nothing But Heavy duty. Your satisfaction with our products is very important
to use If you encounter any problems with the operation of this tool, please
contact your authorized MILWAUKEE® dealer.
For a list of MILWAUKEE® dealers, guarantee, or service agents please contact
MILWAUKEE® Customer Service or visit our website. (Australia Toll-Free
Telephone Number 1300 645 928) (New Zealand Toll-Free Telephone Number 0800
645 928) or visit
milwaukeetool.com.au/milwaukeetool.co.nz.
Milwaukee Electric Tool Corporation
13135 West Lisbon Road, Brookfield, Wisconsin U.S.A. 53005
Milwaukee Tool (Australia)
21 Kellett’s Road, Rowville, VIC 3178 Melbourne, Australia
Milwaukee Tool (New Zealand)
274 Church Street, Penrose, Auckland, 1061, New Zealand
DESIGNED BY MILWAUKEE ELECTRIC TOOL CORP.
PROFESSIONALLY MADE IN CHINA
PRINTED IN CHINA
01601495301Q-02(A)
References
- Milwaukee Tool | Official New Zealand Site of Milwaukee Tool | Nothing but HEAVY DUTY®
- Milwaukee Tool | Official Australia Site of Milwaukee Tool | Nothing but HEAVY DUTY®