GOLDFINGERS TWS-11N ANC Bluetooth Earphones User Manual
- June 6, 2024
- GOLDFINGERS
Table of Contents
GOLDFINGER TWS-11N ANC Bluetooth Earphones
CONTENTS
PRODUCT INTRODUCTION
Specification
- Pairing name lWS-llN
- Bluetooth version vs.o
- Battery 50mAh ( each earbud )
- SOOmAh (charging bas
- Playtime 7.5H (ANC off) 7H (ANC on)
- Call time 6H (ANCoff) SH (ANC on)
- Earbuds charging time 1 SH
- Case charging time 2H
- Standby time 180days
- Cha,ging po,t Typec
OPERATING
PowerOn/OFF
Both earbuds are in the charging case, open the cover, TWS-11 N turns on
automatically Put earbuds into the charging case, TWS-11 N LED indicator blink
in red, TWS-11 N turns off automatically.
Answer/Hang-up/Reject the Call
In the incoming call, click L or R earbud to answer the phone call Incoming
call, doubl lick L or R earbud to reject the call When in call, doub click L
or R earbud to hang up the phone call
Voice assistant
Long press 2 seconds L earbud to turn on voice assistant
Play/Pause music
When playmg music, double-click L or R earbud to play/pause music
Last song/Next song
When playing music, three-cllck L ea巾ud to return to the previous song
When playing music, three-click R earbud to next song
ANC mode
In normal mode, hold R ea巾ud for 2 seconds to tum on ANC
GET STARTED
Take out” TWS-11N “from the charging case,both of L&R earbuds tum on and pair
with each other automatically. Main device indicator blinks in red and green
alternately A叩vate the Bluetooth in your device and chck” TWS-11N·on the
Bluetooth list, then you will hear “connected”
Note•
The earbuds support single-use, If your earbuds don、t pair with each other
nonrnally,put back both earbuds to charging case, open the cover and hold the
multi-function button of charging case 2S until both indicators blink in red
and blue alternately, then the main device indicator blinks in red and blue
alternately, then follow above steps again After first connecton successfully,
once you open the cover of the charging case, the device will reconnect
automatically
RESET
Clear pairing records
Put back both earbuds into the charging case, open the cover and hold the
multi-function button of charging case10S until charging case four LED
indicator blink 10 times at same
time, it means clea『pairing records sucoessfully After clearing pairing
records sucoessfully, open the cover and hold the multi-function button of
charging case 2S the left and right indicators blink in green and blue
altemately to pair both earbuds, then follow the Get Started to connect with
your bluetooth device
CHARGING
Please use the provided charging cable to recharge the earbuds by the charging
case
Charging case LED indicators in white when charging
After full recharged, 4 LED indicators on charging case tum off.
ACCESSORIES
Wear the right size ear caps for your ears.
Adjusting earbuds correctly achieves the best noise reduction
performance and sound quality.
NOTES
- Avoid prolonged exposure to excessive volume that may cause noise-induced heanng impainment. Tum the volume down before putting on your earphones, then adjust it to the right volume
- Don’t use earphones while driving or riding your bike
- Stay away from sharp edges, uneven surfaces, metal parts, and anything that could damage the earphones.
- Do not modify, repair or remove earphones without professional guidance
- Do not use corrosive or volatile liquid to clean the earphones.
- Do not use earphones in dangerous environments
- These earphones contain small parts, which may cause a choking hazards. Please keep away from children and pets to prevent accidents.
- Battery warning:
- improper use of the battery may cause fire or chemical bums.The battery may explode on case of damage.
- Toe battery can only be charged using an adapter specially provided for this product
- Please dispose of batteries according to local regulations.Recycle if possible.Do not dispose of batteries as household waste or throw them into a fire, lest they explode
- Please refer to the user manual for instructions on the charging status indicator
FCC
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>