Shenzhen Swetz Sound Technology IAEBT600-2559-01 Truly wire Free Earbuds User Manual
- June 5, 2024
- Shenzhen Swetz Sound Technology
Table of Contents
Shenzhen Swetz Sound Technology IAEBT600-2559-01 Truly wire Free Earbuds
-
Charging Contacts
-
Earbud Indicator
LED Red when charging. Lights off when fully charged. -
Microphone
-
Function Button.
- Press and hold to power ON
- Press to play/pause music.
- Press to answer/end phone calls.
- Press and hold for 2 seconds to reject incoming calls.
- Press and hold for 5 seconds to power OFF.
- Press and hold for 2 seconds to activate voice assistant (LEFT).
- Quickly press twice to skip to next track (RIGHT).
- Quickly press twice to play previous tracks(LEFT).
- Press and hold for 2 seconds to switch modes between: Normal, Transparent, and ANC (RIGHT).
-
Charging Contacts
Charging the Earbuds
- Open the cover and place the earbuds on the charging contacts. Be sure to match the left and right earbuds with the correct docking station in the case.
- When charging, the first and fourth Power & Battery Indicator LEDs on the case will flash white. When charging is complete, the indicator LEDs will turn off.
- Earbud Indicator LEDs will turn red when charging. When fully charged, the LEDs will turn off.
Power & Battery Indicator LEDs
The 4 white LEDs represent the amount of battery the case charger has.
- LED=25%
- LEDs=50%
- LEDs=75%
- LEDs=100%
Charging the Case
Using a USB-C to USB cable (included), connect to the USB port of a powered on computer or USB power adaptor (not included) to charge the case. When the case is charging the Power & Battery Indicator LEDs will flash white. When fully charged all LEDs will turn solid white.
Pairing Bluetooth
Note: When earbuds are powered on they automatically link and enter into pairing mode. You can power on a single earbud to use as a single unit if you wish.
- With the earbuds linked, you can now connect to your Bluetooth device. The LED indicator on the right earbud to pair to a Bluetooth device.
- On your Bluetooth device, access Bluetooth Settings and search for nearby devices. Select IAEBT600 when it is discovered. When successfully connected to your Bluetooth device, the LED indicator on both of the announce the Bluetooth connection.
- Audio played through the connected Bluetooth device will now be heard through both earbuds. Use the controls on the connected device to play audio and adjust volume.
PLEASE NOTE: Due to the nature of truly wireless earbuds, you may experience slight interruptions with your audio in areas with multiple 2.4Ghz bands or in high wireless traffic area.
Speakerphone
- To accept or end a phone call, press the Function button.
- You can also use the controls on the connected phone to handle phone functions.
Charging Case & Auto-On Feature
While the case power is ON:
- Placing the earbuds in the charging case will
- Removing the earbuds from the case will automatically power them on, link them, and connect to the last used Bluetooth device (earbuds must have been linked and connected to a Bluetooth device already).
Active Noise Canceling & Transparent
The Active Noise Canceling feature will electronically mute background noise. It can be used to enhance the quality of any music or audio that is playing through the earbuds. Transparent Mode enables the earbuds to pick up external sounds, so you can stay aware of your surroundings.
Customer Support
Customer Service: 1-888-999-4215
Email Support: prodinfo@dpiinc.com
Email Parts: partsinfo@dpiinc.com
For Warranty Information and the most up-to-date version of this User’s Guide,
go to www.iLiveElectronics.com
To download this User’s Guide in English, Spanish, or French, or to get
answers to frequently asked questions, visit the support
section at: www.iLiveElectronics.com
Copyright © 2020 Digital Products International (DPI, Inc.) All other
trademarks appearing herein are the property of their notice.
FCC Warnings
WARNING: Changes or modification to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which
is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Additional Warnings
- WARNING: To prevent fire or shock hazards do not expose this unit to rain or moisture.
- WARNING : Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable.
- Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of according to state and local guidelines. They should never be disposed of in normal household waste, and they should never be incinerated, as they might explode. Contact your local government for disposal or recycling practices in your area.
- This product meets and complies with all Federal regulations.
- To avoid hearing damage , make sure that the volume on your music player is turned down before connecting your headphones. After placing headphones in/on your ears, gradually turn up the volume until you reach a comfortable listening level.
WARNING: This product can expose you to chemicals including lead, which
is known to the State of California to cause cancer and birth defects or other
reproductive harm. For more information go to
www.P65Warnings.ca.gov.
This product meets and complies with required Federal product guidelines.
FCC NOTICE:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>