Jackery 3839087 SolarSaga 60W Solar Panel User Guide
- June 6, 2024
- Jackery
Table of Contents
Jackery 3839087 SolarSaga 60W Solar Panel
Jackery Inc.
TM and 2019 Jackery Inc. All rights reserved.
Made in China www.jackery.com
Technical Parameters
Model SolarSaga 60
Peak Power 68 W
Cell Efficiency 23%
Power Voltage 22V
Power Current 3.09A
Open Circuit Voltage 26.4V
Short Circuit Current 3.36A
USB-A Output 5V 2.4A
USB-C Output 5V 3A
Operating Temperature Range -10-65℃
Dimensions (unfolded) 855x535x5mm
Dimensions (folded) 425x535x35mm
Safety Tips
- Do not bend the solar panel(the angle is more than 30°) or the panel will be broken.
- Do not immerse the Solar Panel in water.
- Do not clean the solar panel with water , with the wet cloth gently scrub it.
- Do not use or store the Solar Panel near sources of heat such as a fire or heater.
- Do not put the Solar Panel into a fire or apply direct heat to it.
- Do not pierce the Solar Panel casing with a nail or other sharp object, break it open with a hammer, or step on it.
- Do not attempt to disassemble the Solar Panel in any way.
- This product cannot contact with strong corrosive objects.
- Do not charge automotive battery directly.
Customer Service
24 – month limited warranty
Lifetime technical support
Hello@jackery.com
1-888-502-2236丨Mon-Fri 9:00-5:00 PST
(US)
Warranty **
**
The product is covered by a limited warranty from Jackery for the original purchaser that covers the product from defects in workmanship and materials for 24 months from the date of purchase ( damages from normal wear and tear, alteration, misuse, neglect, accident, service by anyone other than authorized service center, or act of God are not included). During the warranty period and upon verification of defects, this product will be replaced when returned with proper proof of purchase
Frequently Asked Questions
Q: What kind of battery can be charged by these solar modules?
- Jackery Explorer series
- Sealed lead-acid battery
- Colloidal lead-acid batteries
- The open lead-acid batteries
Q: How to clean the solar surface?
Dust and dirt on the surface should first be removed using a soft brush. Use a
damp cloth to wipe the surface of the solar module to remove any remaining
dust or dirt. Any guano or other adhesive should be removed as soon as
possible from the solar surface to avoid a reduction in performance.
Q: Are the foldable solar modules waterproof?
To Maximize the lifespan of the module, it should not get wet.
Contact us
For any inquiries or comments concerning our products, please send an email to
hello@jackery.com, and we will respond to you as soon as possible. If there is
any quality related issue with the product, you may request a replacement or
refund by submitting a request form at
www.jackery.com/support/.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>