Jackery JS-100C Portable Power Supply Solar Panel 100W User Guide

June 1, 2024
Jackery

Jackery JS-100C Portable Power Supply Solar Panel 100W

Jackery-JS-100C-Portable-Power-Supply-Solar-Panel-100W-
Product

Product Information

Specifications

  • Product Name: SolarSaga 100
  • Maximum Power (Pmax):
    • Voltage at Open Circuit (Voc): 60V
    • Current at Short Circuit (ISC): 15A
  • Maximum Reverse Current:
    • USB-A Output: 5V2.4A
    • USB-C Output: 5V3A
  • PV Module Protection Class: Class II
  • Waterproof Level: IP65
  • Consumer Product Category: 2
  • Power Temperature Coefficient:
    • Unfolded Size: 1220x552x20mm
    • Folded Size: 610x552x35mm
  • Net Weight of Product:
    • Maximum Number of Series Connections: 2
    • Maximum Number of Parallel Connections: 2

Product Usage Instructions

Safety Tips

  • Ensure correct polarity and avoid reverse connection of positive and negative poles.
  • Check all connections before use to prevent accidents.
  • Avoid dropping the product to prevent internal damage.
  • Avoid exposure to strong winds, hail, and severe weather conditions.
  • Consider higher currents or voltages during operation and use appropriate safety measures.
  • Avoid damage to prevent electric shock or fire hazards.
  • Avoid direct artificial sunlight on the solar modules or panels.

How to Use

DC7909-DC8020 Adapter:

  1. Open the zipper on the inside of the carrying case bag and connect the cable to the adapter.
  2. Connect the cable to the solar panel and the DC input port of the portable power station.

Solar Panel Connector (DC7909-DC8020):

  1. Open the carrying case bag, connect the cable to the adapter, and then connect two cables to the connector.
  2. Connect the connector to the DC input port of the portable power station after connecting with two solar panels.

Indicator Points
Sun Angle Indicator: Shadow falls in the white inner circle for optimal positioning.

Warranty Information
The product is covered by a limited warranty from Jackery for defects in workmanship and materials for 24 months from the date of purchase. Please refer to the warranty terms and conditions for more details.

Frequently Asked Questions (FAQ)

What is the warranty coverage for the product?
The product is covered by a 24-month limited warranty from Jackery for defects in workmanship and materials.

TECHNICAL PARAMETERS

  • Model: JS-100C
  • Product Name: SolarSaga 100
  • Maximum Power (Pmax) 100W±5W
  • The voltage at Open Circuit (Voc) is 24.8V±5%
  • Current at Short Circuit (Isc) 5.4A±5%
  • Optimum Operating Voltage (Vmp) 20.0V±5%
  • Optimum Operating Current (Imp) 5.0A±5%
  • Maximum System Voltage (V) 60V
  • Maximum Reverse Current 15A
  • USB-A Output 5V⎓2.4A
  • USB-C Output 5V⎓3A
  • PV Module Protection Class Class II
  • Waterproof Level IP65
  • Consumer Product Category 2 Portable applications according to IEC TS 63163
  • Operating Temperature Range -20°C~65°C(-4℉~149℉)
  • Voltage Temperature Coefficient -0.268%/°C
  • Power Temperature Coefficient -0.29%/°C
  • Unfolded Size 1220x552x20mm
  • Folded Size 610x552x35mm
  • Net Weight of Product 4.0Kg±0.3Kg
  • Maximum Number of Series Connections 2
  • Maximum Number of Parallel Connections 2

Unfold the bracket and place it on a flat surface. The design load is 1,600Pa, and the safety factor is 1.5 times. STC: AM=1.5; 1000W/m 2.; 25°C.

SAFETY TIPS

  • Please read the user guide first before using this product.
  • Do not bend the folding solar panels.
  • Do not place the folding solar panels in trees, buildings or other shaded areas for use.
  • Do not immerse the folding solar panels in water or any other liquid.
  • Do not put solar panels in water directly, and use a damp cloth to gently wipe them when cleaning.
  • Do not use or store the folding solar panels near open flames or flammable materials.
  • Do not scratch the folding solar panels with sharp objects.
  • Do not put corrosive substances on the folding solar panels.
  • Do not step on or place heavy objects on the folding solar panels.
  • Do not disassemble the folding solar panels.
  • The output circuit of the folding solar panel package must be connected to the equipment properly, and reverse connection of positive and negative poles is strictly prohibited.
  • Check the connection status of various components, wires, and plugs before use.
  • It is strictly prohibited to drop the products due to the nature of the material. Otherwise, it may cause internal damage to the solar panel, rendering the product unusable.
  • This product cannot be fixed for installation. Please put away the portable folding solar panels in case of strong winds, hail and other severe weather to avoid product damage or other hazards.
  • Under normal circumstances, PV modules may be exposed to higher currents or voltages than under standard test conditions. Therefore, when calculating the rated voltage of the component, the rated current of the conductor, and the size of the control device connected to the PV output, it is required to multiply the short-circuit current (Isc) and open circuit voltage (Voc) values marked on the component by a factor of 1.25.
  • Any damage to the product may lead to electric shock or fire.
  • Do not let artificial sunlight shine directly on the solar modules or panels.

How to use

Tip:
The cable comes with an adapter that allows it to connect to any Jackery portable power station.

  1. DC7909 connector: suitable for the DC input port of Jackery portable power station (diameter: 8.0 mm).
  2. DC7909-DC8020 adapter: suitable for the DC input port of Jackery portable power station (diameter: 8.1 mm).

DC7909 connector:

  1. Open the zipper on the inside of the carrying case bag and take out the cable.
  2. Connect the cable to the solar panel and the DC input port of the portable power station.Jackery-JS-100C-Portable-Power-Supply-Solar-Panel-100W-Fig- \(1\)

DC7909-DC8020 Adapter:

When using the adapter

  1. Open the zipper on the inside of the carrying case bag, take out the cable and connect it to the adapter.
  2. Connect the cable directly to the solar panel and the DC input port of the portable power station.Jackery-JS-100C-Portable-Power-Supply-Solar-Panel-100W-Fig- \(2\)

When using the connector

  1. Open the zipper on the inside of the carrying case bag, take out the cable and connect it to the adapter.
  2. Connect the two connecting cables to the two holes of the connector respectively.
  3. After connecting with two solar panels, connect the connector to the DC input port of the portable power station.Jackery-JS-100C-Portable-Power-Supply-Solar-Panel-100W-Fig- \(3\)
    • To maximize the power generation, adjust the orientation of SolarSaga 100 throughout the day to ensure full exposure of the panel surface to direct sunlight.
    • The solar panel connector may be optional or standard depending on the model of each portable power station. Please refer to the o˜cial website and user manual for more details.

Sun Angle Indicator

  • The carry handle has a sun angle indicator. When sunlight hits its surface, a shadow will appear at its bottom.
  • If the shadow falls on the white inner circle at its bottom, it means that the solar panel is facing directly towards the sun and you can get optimal power generation; if not, it is suggested to adjust its angle until it does.

Jackery-JS-100C-Portable-Power-Supply-Solar-Panel-100W-Fig-
\(4\)

WARRANTY

The product is covered by a limited warranty from Jackery for the original purchaser that covers the product from defects in workmanship and materials for 24 months from the date of purchase ( damages from normal wear and tear, alteration, misuse, neglect, accident, service by anyone other than authorized service centre, or act of God are not included ). During the warranty period and upon verification of defects, this product will be replaced when returned with proper proof of purchase.

FREQUENTLY ASKED QUESTIONS

Q: What kind of battery can be charged by these solar modules?

  1. Jackery Explorer series
  2. Sealed lead-acid battery
  3. Colloidal lead-acid batteries
  4. The open lead-acid batteries

Q: How to clean the solar surface?
Dust and dirt on the surface should first be removed using a soft brush. Use a damp cloth to wipe the surface of the solar module to remove any remaining dust or dirt. Any guano or other adhesive should be removed as soon as possible from the solar surface to avoid a reduction in performance.

Q: Are the foldable solar modules waterproof?
To Maximize the lifespan of the module, it should not get wet.

CONTACT US

For any inquiries or comments concerning our products, please send an email to [email protected], and we will respond to you as soon as possible. If there is any quality-related issue with the product, you may request a replacement or refund by submitting a request form at www.jackery.com/support/.

CUSTOMER SERVICE

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals