TOA MD-200 Media Player Instruction Manual
- June 6, 2024
- TOA
Table of Contents
TOA MD-200 Media Player
Thank you for purchasing TOA’s Media Player
Please carefully follow the instructions in this manual to ensure long,
trouble-free use of your equipment.
SAFETY PRECAUTIONS
• Be sure to read the instructions in this section carefully before use.
• Make sure to observe the instructions in this manual as the conventions of
safety symbols and messages regarded as very important precautions are
included.
• We also recommend you keep this instruction manual handy for future
reference.
WARNING
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
Indicates a potentially hazardous situation which, if mishandled, could result
in moderate or minor personal injury, and/or property damage
When Installing the unit
- Do not expose the unit to rain or an environment where it may be splashed by water or other liquids,
- Do not cut, klink, otherwise damage nor modify the power supply cord. In addition, avoid using the power cord in close proximity to heaters, and never place heavy objects — including the unit itself — on or electric shock.
- Avoid installing or mounting the unit in unstable locations, such as on a rickety table or slanted surface. Doing so may result in the unit falling down and causing personal injury and / or property damage.
- To prevent lightning strikes, install the unit at yet within the protective range (angle of 45°) the lightning conductor.
When Installing the unit
• Never plug in or remove the power supply plug with wet hands, as doing so
may cause electric shock.
• When unplugging the power supply cord, be sure to grasp the power supply
plug, never pull on the cord it self. Operating the unit with a damaged power
• When moving the unit, be sure to remove its power supply cord from the wall
outlet. Moving the unit with the power cord connected to the outlet may cause
shock. When removing the power cord, be sure to hold its plug to pull.
• Avoid installing the unit in humid or dusty locations, in locations exposed
to the direct sunlight, near the heaters, or in locations generating sooty
smoke electric shock.
• The socket – outlet shall be installed near the equipment and the plug
(disconnecting device) shall be easly accessible.
GENERAL DESCRIPTION
The MD-200-AS is a media player and digital processing FM radio tuner. The unit has a USB and SD card slot that allows MP3 playback. It also has the capability to store up to 30 radio channels which can be called up with 1 touch of a button. The unit can be mounted on an EIA equipment rack.
Functions
-
Power Switch
Press this button to Activate (Turn ON) Media Player. (LCD Light Blue, Text Appear “Welcome” and Tuner Station, Button function Light On) Press once again to Turn OFF Media Player. -
Slot for SD Card
When SD Card plugged ON, Text Appears “Card”, Folder No., and Track Qty. -
Slot for USB Card
When USB plugged ON, Text Appears “USB”, Folder No., and Track Qty. -
LCD Display
USB/SD Card status including track number and playing time. -
USB/SD Indicator
Press USB/SD/TUNER button on remote to change LED Indicator. (When USB/SD Indicator light on, function remote button only for USB/SD card. -
( ) or PLAY/PAUSE
Press once to start playing, Press again to pause. Text Appears “Title, No. of Track, Time, Extension Track, Back Light GREEN. When Pause mode Music stop (No Sound) Text Appears “Title, No. of Track, Time (blinking), Extension Track”. -
( ) or STOP
Press this key to stop playing. Text Appears “Disc”, Folder No., and Track Qty, Back Light RED -
MUTE
Press this key while playing to mute sound, press again to recovery, Sound Appear. Display “MUTE ON or MUTE OFF”. -
USB/SD
Press this key to change to USB or SD Card mode. Text Appears “Reading CARD/USB” -
( ) or REPEAT
(Press this key while playing) pressing this key will switch between : “ PLAY ALL RANDOM REPEAT TRACK REPEAT FOLDER
REPEAT ALL RANDOM REPEAT PLAY ALL”. -
( ) or SKIP
Press this key will skip to the next track (Available for USB and SD card). Keeping pressing this key will fast-forward (Time will running). -
( ) or SKIP
Press this key will skip to the previous track (Available for USB and SD card). Keeping pressing this key will fast-rewind (Time will running). -
( ) or FOLDER
Press this key will skip to the next Folder (Available for USB and SD card). Keeping pressing this key will fast-forward Folder. -
FOLDER
Press this key will skip to the previous Folder (Available for USB and SD card). Keeping pressing this key will fast-rewind Folder. -
PROG
Set to programming mode. When the STOP key is pressed during programming mode, all program are cleared Display. “P-01 000 0000” -
A-B
When this key is pressed during play, the beginning of time is marked. Press this key one more time, the end of time is also marked, and the set will play from the beginning to the end cyclically. Press this key again to reset the function. -
PLAY 1
will stop “PLAY 1” ( Not automatically play next track ). To play next track have to press PLAY button. While playing the track, press this key again to stop this condition. Text Appears “PLAY ALL”. -
RAND
Press this key to Random of track. Press again, Random Track will stopped.
Display text appear “RANDOM REPEAT” and “RDM”, press again text will disappear. -
0-9
Press this keys to select the track directly ( 1 – 9999 ) Press this keys to select frequency station radio has been saved or directly. -
10/0
Press this key to change to channel station number 10. -
UP
Press this key the reception frequency Radio (FM) will increased 50 kHz. When the button is pressed for a few seconds, automatic adjustment frequency. Starts and will stops automatically as soon as a station is detected. (Text appears “FM”, Frequency Radio Station, “CH” no.). -
DOWN
Press this key the reception frequency Radio (FM) will decreased 50 kHz. When the button is pressed for a few seconds, automatic adjustment frequency. Starts and will stops automatically as soon as a station is detected. (Text appears “FM”, Frequency Radio Station, “CH” no.). -
MEM
preset memory of 30 CH) To save the displayed reception frequency in the preset memory, press the MEM key, then press the number key. Press the MEM key again to save the reception frequency in that number key. (Display CH01, CH02, …CH30). -
+10/–
Press this key once, the preset station number will add 10. Press this key a few seconds, then use number key to input the preset station. -
TUNER Indicator
Press USB/SD/TUNER button on remote control to change LED Indicator. When TUNER Indicator light on, function remote button only for tuner. -
IR
Pick up signal from the remote controller. -
FM TUNER Display
FM Tuner status including FM band and channels memory. -
TUNER USB/SD
Press this key to change LED Indicator to indicate that the remote work for USB/SD, or Tuner.
(For Example When LED Indicator tuner Light ON Function Remote Button only for tuner). -
ID3
(Press this key while playing) Pressing this key will info about USB or SD Function.
Text appear “USB” or ‘CARD”. -
INTRO
Press this key to INTRODUCE each track such as Title of Song and No. Track. Time for INTRODUCE is about 10 second for each track. Press again will stop INTRODUCE track. Display text appear “INTRO” Running Title, Time Track, “INT “. -
M/S
Press these key to change Sound Audio of Station Radio to MONO / STEREO System. Display text “MONO” or “STEREO”. -
DIRECT
This is a direct search function. Press this key once, then use number key (0 – 9) to input the station frequency, press DIRECT key again to
The tuner jump to this station. If the input frequency is beyond the range or incomplete, the tuner will display ERROR. -
M-DOWN
Press this key to search Channel Frequency has been saved (Channel freq is decrement). -
M-UP
Press this key to search Channel Frequency has been saved (Channel freq is increment). -
SLEEP
When the SLEEP key is pressed, the sleep function 5 seconds. The sleep time begins from the 90 minutes and change cyclically as shown below. When the SLEEP time is set, the power is automatically switched off after the sleep time. Display “90 80 70 60 50 40 30 20 10 OFF Min” The sleep function is cleared, if the SLEEP key is pressed till the sleep time is not displayed on the LCD -
ASM
Press these key to auto scan mode and memory function.
Press this key in a few seconds, the tuner will search the station and store in memory automatically (will saved 30 CH station Radio). -
RDS
Press these key to activate the Radio Data System (RDS) RDS is a standard communication protocol for embedding small amounts of digital information on conventional FM broadcasts. RDS standardized several types of information sent. One of them: time, radio station name and program information
- PS (name service program)
This is only eight static characters display that represents the name of the radio station that broadcasts it. - PTY (type of program) being broad
Rear
Dimensions
Specification
