BOULT PROBASS PROPODS User Manual
- June 6, 2024
- BOULT
Table of Contents
PROBASS PROPODS
USER MANUAL
For better sound quality experience, suggest use IOS 8.0/ Android 4.3 or above operation system.
Product Introduction
- Silicone Eartips
- Charging Pin
- Earbuds Indicator
- Touch Control Area
- Charging Pin
- Indicator
- Charging Connector
Connecting to Earbuds
First time Setup:
Open the case and earbuds Bluetooth will automatically turn on. Turn your
device Bluetooth on. Search for udio Propods and select to connect.
Regular
use :
Open the case opens the earbuds will automatically connect with a pre-
connected device.
Start Listening
Place the earbuds into your ear and twist slightly for a comfortable and snug fit
Note: Regularly clean the dust mesh after use to avoid the sound being blocked by dirt and debris.
Power On & Off
Power-On
- Remove the earbuds from the case, they will automatically turn on and pair with each other.
- Long press the touch control area on both earbuds at the same time for 3 seconds, then the earbuds will turn on and pair with each other.
Light status: One side ed and blue LED light alternatively, another side LED light slowly.
Power-Off
- Earbuds will automatically turn off and enter charging mode when they are placed in the case.
- Disconnecting the Bluetooth from the device and laying the earbuds down for mins will turn them off.
Start Charging
Charging the Earbuds
Place the earbuds into the case, once the charging pin connects, the light on
the charging case will turn on to display the case battery remains, then the
orth light keep white on indicating the earbuds charging, light oy is full.
Charging the Case
Plug the charging case into 5V/1A adapter with a Type-C cable (include in the
package).
The charging light will ging. When full the white light will stay on and the
case should be disconnected from the power source.
Specification
Bluetooth Standard: Version 5.0
Bluetooth ProHSP/HFP/A2DP/AVRCP
Earbuds Battery: 36mAH Li-polymer Battery
Charging Case Battery: 400mAH
Output Voltage of Base: 3.7V
Charging time Earbuds- 1.5H, Charging case- 1H
Working time: About 4H
Standby: About 60H
Working distance: 10M
Compatible System: Android/IOS/Windows
Pairing
Remove both earbuds from the case then triple-click the touch control area on both earbuds at the same time with in 10 seconds. After they get paired the master earbud one will red and blue LED light and the slave one will LED light slowly.
Trouble Shooting
P: The Parbuds dont pair with each other?
A: Place the earbuds into case and close the lid. Take them out of the case
and try to connect again. If this doesnt work, Please try above point 6.
pairing.
P: The earbuds dont charge when place into the case.
A: Check to see if the charging case light will turn on when earbuds are
placed inside. If it doesnt light up charge the case
P: The sound is imbalanced between the left and right side.
A: Please clean the earbuds mesh after use.