ADUROSMART LAD00021 Wireless Scene Switch User Manual
- June 6, 2024
- ADUROSMART
Table of Contents
ADUROSMART LAD00021 Wireless Scene Switch User Manual
The Eria wireless scene switch is a battery-powered dimmer for ZigBee Light link and 3.0 certified lights: it controls your preferred lighting setting.
Overview
| short press. ON / OFF. flash green
---|---
Long press: When the paired lights are in the operating state, the green cycle
flashes and the lights are gradually turned to the darkest, but they will not
go out, and then the light will turn on to the brightest. Do this until
the key is released and fixed in the current brightness.
1| Short press. play the scene 1. flash green
Long press, save the scene 1.flosh green
2| Short press, play the scene 2. flash green
Long press, save the scene 2.flosh green
3| Short press, play the scene 3. flash green
Long press, save the scene 3.flash green
+1| tPoPirctsa%
---|---
1 +2| Long press
To touch link with bulbs.
2+3| Long press
Connect to the gateway.
+3| LRoengset7treessbulb.
1 +3| Long press
Reset to factory settings.
-
Pull off the lid sticking out of the battery compartment.
For more information on installation and use please visit www.adurosmart.com/remote. -
To use without a control station, switch on the ZigBee lamp which you want to control.
-
Touch the lamp cover with the remote and keep pressing button 1 (symbol) + button 2 (symbol) . The Eria soft white lamp will flash 2 times when it initiates the touchlink and a color lamp will flash green once. Make sure that you keep button 1 (symbol) + button 2 (symbol) pressed until a successful touch-link is confirmed as illustrated at step 4.
-
If the touchlink is successful the soft white lamp will flash slowly 2 times, if you have touchlinked the color lamp successful then it will turn green.
Connect with the ERIA hub
-
A. Download the Adurosmart App from the Apple App Store or from Cocci° Ploy or go to http://adurosmart.com/adurosmart-app/
Andriod
IOS
-
B. If you have a third party ZigBee compatible hub “luili proceed
-
Open the Adurosmart Eria APP.
-
On the bottom right corner press on “Settings”.
-
Select “Devices”.
-
On the top right corner press on the “+” symbol then press on “Add device”.
-
Press on “Brands” and then
-
Press on “Scene Controller select “AduroSmart ER IA”.
-
Proceed by pressing on “Search” to allow the ERIA hub to find the remote, the LED indicator on the hub will flash green this indicates that the hub is searching for new devices.
- If you have a third party hub, then this is the moment to initiate the search from your Smart Home hub app.
-
While the hub is searching press and hold button 2 (symbol) and 3 (symbol) on the remote for 10 seconds if the remote is paired successfully it will be confirmed by a green flash, when the remote has failed to pair the LED indicator will flash red.
-
When the remote has been found and paired successfully it will show up in your search results, press on “Done” to complete the process .
Troubleshoot
If you have followed the pairing instructions but you are still not able to connect your device then follow below instructions to rset the controller.
To reset the remote
Press and hold the 1 button (symbol) + 3 button (symbol) on the remote simultaneously for 10 seconds.
a successful reset wil be confirmed by a green flash from the LED indicator. failed reset will be indicated by a red flash.
Need help? Call us
For troubleshoots, Instruction video or more information please visit at
www.adurosmart.ev
Chat with one of our support agents at www.adurosmart.com
The netherland : +31523687532
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>